Craftsman Parts

This is a simple extension spring with an outside diameter of 0.38 and a slack length of 2.5. It is primarily used as an extension spring for snowblowers, but may be compatible with other lawn equipment. It’s designed to apply tension as the throttle is applied. The more gas there is, the more resistance will be present. Under most circumstances, replacement is easy. When the spring breaks or gets rusty, look at both points of attachment. Memorize where it’s attached, or take a picture, and remove the old spring using a pair of pliers if necessary. Install the new spring and the tool is ready to use. This is an OEM part sourced directly from MTD, and it is sold individually. It’s black in color and was initially designed for Troy-Bilt lawnmowers. However, because this is a versatile part, it has since been repurposed for a number of MTD and related machines in other brands. These include lawn tractors and snowblowers, as well as lawnmowers, in brands such as Ryobi, Yard Machines, Husky, and Cub Cadet.

This is a sponge filter that is used in several types of lawn and garden equipment. It helps remove dirt, dust, and other debris before it can reach the engine. If the sponge filter is dirty, damaged, or otherwise not working correctly, debris can end up clogging the carburetor, which will weaken performance or prevent it from starting completely. If the dust and dirt reach the engine, serious engine damage can occur.Inspecting the sponge filter on a regular basis is important to ensure it's working well. It also needs to be replaced at least annually, and possibly more often depending on wear and tear. Replacing the air filter is simple. Take off the lid on the filter and then remove it from the machine. Replace it with the new sponge filter and replace the lid.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The sponge filter is compatible with lawnmowers, lawn tractors, and wood chippers manufactured by Craftsman, Huskee, Cub Cadet, MTD, and Yard Machines.

This part is a v-belt. A v-belt attaches the engine pulley to the transmission pulley, which is the system that moves the machine forward. This v-belt is approximately 21” long.A new v-belt may be needed if the original is showing signs of wear. The v-belt may become worn after years of normal use. Another sign that the v-belt needs to be replaced is if the operator hears squeaking during use. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Use caution and make sure to turn the machine off before attempting to make any repairs to it.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. This particular v-belt is compatible with snowblowers that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Husky, and Craftsman.

This is a genuine engine cylinder that is designed for use in select outdoor power equipment. The cylinder is the part of the engine that houses the spark plug and piston, creating the combustion chamber that the engine needs to ignite the air-fuel mixture that runs the engine. The cylinder is exposed to high heat, excessive pressure, and chemicals that can all cause wear and breakage over time. In the event that the cylinder goes bad, it needs to be replaced immediately to prevent further engine damage. This OEM cylinder is manufactured by Husqvarna. It can be used in trimmers, blowers, edgers, and pruners from the brand, as well as from Poulan and Weed Eater. The cylinder is sold as an individual unit and does not include hardware or other parts or accessories. Replacing the cylinder takes a little more effort because it requires disassembling the engine. To replace the cylinder, remove the engine shrouds, and then remove the engine from its mount. From here, the cylinder can be removed from the block and the piston can be taken out. Then, the new cylinder can have the piston installed before being bolted into place. The accessories can be replaced and then the engine can be re-mounted.

This part is a genuine OEM replacement mandrel spacer washer usually used to line up drive pulleys on lawn tractors or riding mower engines. The drive pulley is an integral part of the transmission. As a type of washer, a mandrel spacer helps to distribute weight and pressure so that the link does not crack or bend. Compared to standard washers, though, mandrel spacers are quite thick, so they can take more of a load. The best time to replace a mandrel spacer washer is when making repairs to the drive pulleys. These parts take a lot of wear and tear and can corrode the connection over time. To prevent this from happening, replace the mandrel spacer washer as soon as it starts to look worn out or when conducting regular maintenance. This mandrel spacer washer is a top of the line replacement part for Ryobi, Jonsered, Weed Eater, Poulan, and Husqvarna engines. As such, this part comes sourced directly from its original manufacturer. This spacer washer does not ship with any additional hardware.

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This is a seat switch found on many different lawnmowers. It is a four-pronged plug with a button on the top of the part. The inside of the button has dual sets of contacts. One of them completes the circuit between two blades, while the other focuses on the additional blades. The seat switch turns the motor off if the user leaves the seat while the deck is engaged. It is an important safety component that can prevent injuries and should be replaced if it is damaged or broken. If the seat switch is broken, it won't recognize if someone is in the seat or not and will not cut the engine power if someone leaves the seat while the motor is running. Replacing the part requires a wrench set, a screwdriver, and work gloves. Lift the seat to gain access to the seat switch. Make sure the battery is disconnected throughout the process.This is an authentic OEM replacement part directly sourced from the manufacturer. It is sold as an individual part. The seat switch is compatible with lawnmowers made by Craftsman, Husqvarna, and Poulan.

This part is a twin-muffler assembly that is used on lawn tractors. A muffler assembly is a component on engines that have two cylinders. The purpose of the muffler is to reduce the noise and the emissions that are produced by the motor. This part also connects to the exhaust pipes.A new twin-muffler assembly may be needed if the original has become clogged and is no longer functioning correctly. Mufflers often need to be replaced within the lifespan of the tractor as they are susceptible to wear and tear. Make sure to allow the machine to cool down thoroughly prior to attempting to perform any repairs or replacements on the machine. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This twin-muffler assembly is a genuine Husqvarna part. It is sold individually. This particular twin-muffler assembly is compatible with lawn tractors that are manufactured by Husqvarna, Poulan, and Jonsered.

This part is a fuel tank assembly that is used on leaf blowers. This assembly includes the fuel tank, fuel lines, fuel filter, and tank cap. The fuel tank is the component that holds the fuel for the engine while the fuel lines circulate the fuel throughout the engine.A new fuel tank assembly may be needed if the original is cracked, broken, or damaged in any way. Over time, the fuel tank may become damaged due to the constant vibrations that it experiences. If this is the case, it will need to be replaced to ensure the operator's safety. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This part is a genuine Husqvarna part. It is sold individually. This particular fuel tank assembly is compatible with leaf blowers that are manufactured by Husqvarna, Poulan, and Craftsman.

This adapter attaches the blade to the motor shaft and can ensure a secure fit for the size of the blade that you need. The adapter will hold the blade in place and allow it to rotate appropriately. Although this piece is made of metal, it can wear down with regular use over time and may need to be replaced. It could also become damaged, which would require a more immediate replacement. Either way, this genuine OEM blade adapter can provide a solution for compatible mowers. This blade adapter is reasonably simple to install, but always disconnect the spark plug before doing any work. The Craftsman blade adapter can be used as a replacement part on compatible lawnmowers models from Craftsman, Husqvarna, Poulan and Poulan Pro, Weed Eater, EHP, Yard Pro, Sears, Rally, and Roper.