Dryer Burner & Related Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP693140
If your dryer won't heat or flame won't stay lit, a corroded burner tube may be the cause. This assembly includes an adjustable air shutter for proper combustion.
Do-It-Yourself Stories from Customers like You
Dryer not heating Ray M. • Marissa , IL • October 03, 2014
I removed the kick panel/door and confirmed there was no flame. Inspection with a flashlight revealed the igniter was damage - partly broken away. Using a 1/4" socket set I removed the burner assembly. Inspection showed the burner was rusted and the flame deflector had fallen off. I ordered both the "Dryer Igniter and Bracket" and a burner. They arrived in about three days. I had to attach the igniter to the bracket (one screw) and then the bracket to the burner (one screw). The only...
Read more
More
$85.38
- Compare At:
-
$102.46
- You Save:
-
$17.08
Genuine Frigidaire part
By: Frigidaire
Part Number: PCK4200
Converting your dryer from natural gas to propane? This LP conversion kit includes calibrated orifices for proper fuel flow. DIY-friendly install.
Do-It-Yourself Stories from Customers like You
Converting dryer from natural gas to lp John M. • Townsend , GA • June 29, 2014
Removing cabinet panels to access burner was the major challenge since every one seems to be different. This one, two screws at back allowed top to raise and be removed, Two more screws at front and two cables disconnected removed control panel. The door panel was not quite as obvious, The two screws at top sides and two at very bottom edge were removed. Then by trial, I removed screws around door edge until panel was loose. I removed a couple extra; but the whole door and panel lifted off....
Read more
More
$75.44
- Compare At:
-
$90.53
- You Save:
-
$15.09
Genuine Whirlpool part
By: Whirlpool
Part Number: MAL9000AXX
The LP Gas Conversion Kit is an OEM part for Whirlpool appliances. This kit allows for the conversion of natural gas appliances to use liquid propane (LP) gas. It includes all necessary components, such as orifices and instructions, to ensure a safe and efficient conversion.
Over time or due to specific needs, you might need to convert your appliance from natural gas to LP gas. Causes for needing this conversion include moving to an area where only LP gas is available or preferring LP gas due to its efficiency and environmental benefits.
Symptoms indicating the need for a gas conversion kit include:
- Moving to a location that only supplies LP gas
- Changing energy preferences for better efficiency
- Appliances set up for natural gas needing adaptation to LP gas
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
I changed my dryer from ng to lp Dave F. • Kimbolton , OH • June 06, 2015
The kit was very simple it took longer to take the dryer apart than it did to do the change over and it works great thank you for you're product
Read more
More
$48.37
- Compare At:
-
$57.56
- You Save:
-
$9.19
Genuine Samsung part
By: Samsung
Part Number: DC62-00201A
Fix a dryer that won't heat or has a weak flame by replacing the gas valve assembly. Includes coils and orifices. Video guide available for DIY repair.
Do-It-Yourself Stories from Customers like You
Gas dryer wouldn't heat William B. • Frostburg , MD • October 15, 2015
Ordered the gas assembly valve
Read more
More
$255.64
- Compare At:
-
$304.21
- You Save:
-
$48.57
Genuine Whirlpool part
By: Whirlpool
Part Number: 279923
Dryer won't heat or pilot lights but shuts off? This gas valve assembly controls burner ignition and flame. Typical DIY repair in 45-60 minutes.
Do-It-Yourself Stories from Customers like You
The gas Dryer would not dry clothes because the pilot would ignite but the gas would turn on for a moment then turn off. Eventually the gas would not come on at all. Kenneth S. • Columbus , MI • March 24, 2014
I decided the problem was with the gas valve and I found the part on your web site. I ordered it and received the part in 3 days. I replaced the valve and the dryer works like new! This also gave me an opportunity to vacuum out the dust/lint that collects in and around the dryer.
Read more
More
$155.45
- Compare At:
-
$184.99
- You Save:
-
$29.54
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823508
This gas surface burner head distributes fuel through its ports to create an even, reliable flame on your cooktop. Replace a clogged, damaged, or warped head to restore consistent ignition and proper heat on the affected burner.
- Channels gas through precision ports to produce a steady, even flame
- Interfaces with the surface igniter/electrode for quick, reliable ignition
- Replaces worn or clogged heads that cause weak, uneven, or yellow flames
- Helps resolve delayed ignition or a burner that won't light
What's included: 1 gas surface burner head. Install notes:
- Disconnect electrical power and shut off gas supply before servicing
- Remove grate and burner cap, lift off the old head, and clean the mating surface
- Align the new head with the igniter and locating features; seat it fully before replacing the cap
- Restore gas and power; test ignition and verify proper flame pattern
Do-It-Yourself Stories from Customers like You
Slow gas leak Roger T. • Houston , TX • October 11, 2016
Valve (or a component on it) was slowly leaking gas. I was able to easily replace the entire gas assembly with this order. Item was mostly pre-assembled, and contained all parts needed, including new igniter and coils.
Read more
More
$177.34
- Compare At:
-
$270.07
- You Save:
-
$92.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WP306176
Dryer not heating or flame goes out after a minute? This gas valve with coils restores heat. 15-minute repair with video guidance available.
Do-It-Yourself Stories from Customers like You
Gas valve on gas dryer leaking Thomas R. • Stillwater , MN • January 10, 2017
Replaced valve had some trouble removing the fitting from the valve as the new fitting was slightly too large and had to be replaced with the fitting from the old valve. Used a large crescent wrench to grip the valve at the base and I was able to apply enough force to remove both fittings transferring old fitting to new valve. The instructions were detailed and excellent. The dryer is up and running fine.
Read more
More
$215.95
- Compare At:
-
$254.82
- You Save:
-
$38.87
Genuine Lg part
By: Lg
Part Number: AGM30063309
The Gas Valve Assembly is an OEM replacement part for LG gas dryers. It precisely controls the flow of gas to the burner unit during drying cycles.
Symptoms of a faulty gas valve include:
- Inadequate or inconsistent heating
- Burner failure to ignite properly
- Error codes related to gas or pilot light issues
Causes may involve wear and tear of valve seals over extended use, blockages limiting gas flow, or damage like dents that compromise valve integrity.
This authentic LG assembly is compatible with select Kenmore brand models.
Do-It-Yourself Stories from Customers like You
Burner would turn off after a few seconds Steve R. • Canyon Country , CA • June 27, 2014
After watching the video, I replaced the gas valve.
Read more
More
$250.60
- Compare At:
-
$298.21
- You Save:
-
$47.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33002793
Dryer won't heat or flame cycles on and off? A warped burner assembly prevents reliable ignition. Moderate DIY repair restores even drying.
Do-It-Yourself Stories from Customers like You
First look 2nd look 3rd look success!!!!! Kirk P. • Des Moines , IA • October 10, 2014
When I first looked at my dryer I thought it was my ignitor, on a closer look I found that about an inch of my burner assembly arm was laying in a corroded mess on the bottom pan of my dryer. I came online and found your website. After reviewing your parts I thought well I can probably get those local and with competive pricing. Wrong!! There are 3 appliance parts stores withing about 3 miles and I checked them all. Higher prices by 25-35% and longer wait times than your advertised...
Read more
More
$106.95
- Compare At:
-
$127.27
- You Save:
-
$20.32
Genuine Lg part
By: Lg
Part Number: 4948EL4001B
For propane order 383EEL3002A.
Do-It-Yourself Stories from Customers like You
Dryer was setup for propane very dangerous when connected to natural gas dryer was exhibiting low to no heat with a very pronounced presence of a strong raw gas smell Robert R. • Houston , TX • May 04, 2015
I ordered the natural gas conversion orifice with 2 day shipping, I also ordered for only maintenance reasons a new ignitor, as they are very common wear and tear item (like a spark plug on a gas engine or a glow plug on a diesel engine ). Both items came promptly and well protected . Easy install, only needed a Phillips screwdriver for entire repair. R&R top first, r&r front display panel,r&r door,r&r front panel,r&r drum (very easy), replaced ignitor and orifice. Total job took 30 min. I...
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Ge part
By: Ge
Part Number: WE03X23918
This valve and pipe assembly regulates and routes fuel through the dryer's system so the burner can ignite and maintain heat. Replacing a failing assembly restores reliable heating performance and consistent drying results. What it does
- Opens and closes to control fuel flow to the burner when heat is called for
- Directs fuel from the inlet to the burner orifice through a rigid manifold/pipe
- Helps maintain safe shutoff when the dryer is idle
- Common symptoms of a failing assembly: no heat, intermittent heat, or burner failing to ignite
What's included
- One valve-and-pipe assembly
Install notes
- Disconnect power and shut off the gas supply before servicing
- Use only gas-rated fittings/sealant as specified by the manufacturer; do not overtighten connections
- After installation, check all joints for leaks with a soap-and-water solution
- Restore power and gas, then verify proper burner ignition and stable heating
Do-It-Yourself Stories from Customers like You
Gas dryer to propane. Tom P. • Lompoc , CA • November 04, 2018
New part
Great service faster than expected
Read more
More
$136.75
- Compare At:
-
$164.10
- You Save:
-
$27.35
Genuine Ge part
By: Ge
Part Number: WE25X218
Converting your dryer from LP propane to natural gas? This conversion kit includes the orifice and components needed for a quick, straightforward swap.
Do-It-Yourself Stories from Customers like You
Converting from lp to natural gas Joe W. • Goshen , IN • September 09, 2014
Ordered the OEM conversion kit from you guys
Read more
More
Genuine Ge part
By: Ge
Part Number: WE14X215
Dryer won't heat or you smell gas? The gas valve controls fuel delivery to the burner. Common fix for heating failures and gas leaks. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Bad gas valve Michael P. • Mount Prospect , IL • March 04, 2016
Replaced. It
Read more
More
$116.78
- Compare At:
-
$138.97
- You Save:
-
$22.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33002924
This Kit includes the Regulator Lock Limiter, the Main Orifice Spud and the instruction sheet.
Do-It-Yourself Stories from Customers like You
Needed to convert from lp to natural gas Megan W. • Cedar Rapids , IA • November 03, 2014
By putting on the part.
Read more
More
$67.95
- Compare At:
-
$80.86
- You Save:
-
$12.91
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303207409
Gas smell during or after cycles? Dryer won't heat? Replace the gas valve assembly to restore proper gas flow and safe operation. Advanced repair.
Do-It-Yourself Stories from Customers like You
Gas smell in the dryer after a cycle completed no smell outside the dryer (until i opened the door!) Matthew M. • Mcfarland , WI • April 25, 2016
Frigidaire Gallery gas dryer from maybe 15 years ago. Based on the fact the the smell was only in the dryer, I concluded it must be the gas valve failing to completely seal when closed. After looking at the insides again, I suppose it is possible that it was a connection near the burner, but that stuff had remained untouched for 10 years so I still think I made a good assumption. I got a new ignitor as well since I was in there, and compared to the valve, it was cheap! I thought I could get in...
Read more
More
$267.74
- Compare At:
-
$318.61
- You Save:
-
$50.87
Genuine Frigidaire part
By: Frigidaire
Part Number: 134197700
Dryer won't heat? A faulty gas burner assembly prevents proper flame and ignition. This part restores heat for efficient drying. DIY repair in 1-2 hours.
Do-It-Yourself Stories from Customers like You
Electrolux dryer not heating Christopher O. • Block Island , RI • August 23, 2019
Went to youtube and found out what was the cause. Replaced the parts that said might be the issue, Dryer working perfectly. All done in about 1/12 hrs
Read more
More
$47.77
- Compare At:
-
$57.32
- You Save:
-
$9.55