Dryer Switch

Replacement infinite switch that restores variable heat control for a surface heating element on an electric range, letting you adjust burner temperature smoothly and accurately. What it does:

• Regulates power to a surface heating element so the burner produces the selected heat level.
• Replaces a failed or worn rotary control that no longer changes element output.
• Common symptoms: burner won't heat, only heats at one setting, temperature jumps or fluctuates, or knob turns with no effect.
• Fits behind the console and connects to existing element wiring and control knob.

• Disconnect the appliance power before removing the console or control panel to avoid electrical shock.
• Confirm wire locations and take a photo before disconnecting to ensure correct reconnection.
• Secure the switch in place and reconnect wires firmly; test all settings after reassembly.

This temperature switch is a replacement thermal control that helps the appliance regulate and maintain correct operating temperature for safe, reliable performance. Replaces a worn or faulty switch to restore proper temperature response. What it does:

• Opens or closes the circuit based on temperature to control heating elements or cycles
• Restores normal temperature regulation when oven, range, or heating function is inconsistent
• Can prevent overheating or underheating symptoms like uneven cooking or long heat-up times
• Works as a direct electrical control

• Disconnect power to the appliance before starting any repair
• Handle terminals carefully; ensure secure, corrosion-free electrical connections

This plug-style electrical switch controls power to a specific appliance circuit, restoring proper on/off function for the related component. It's a small, direct-replacement switch used where a plug-in connection is required. What it does:

• Controls electrical power flow to the connected component so the part can be turned on or off.
• Can resolve symptoms like loss of power to a specific function or intermittent operation of that circuit.
• Acts as the user- or board-operated electrical connection point for the appliance subassembly.
• Provides a removable plug-style connection for easier replacement or servicing.

• One plug-style electrical switch

• Disconnect power to the appliance before servicing to avoid shock risk.
• Confirm the correct orientation and secure connection of plug terminals during install.
• Tighten mounting fasteners as required; avoid overtightening plastic housings.

This rotary oven selector switch controls oven functions and temperature selection so the range operates reliably and you can choose the correct cooking mode. Designed to replace a worn or non-working selector control. What it does:

• Selects oven mode (bake, broil, etc.) and communicates the chosen setting to the control system
• Restores responsive control when the selector is stiff, intermittent, or fails to click into positions
• Helps eliminate incorrect oven operation or inability to change cooking modes
• Works as the user-facing control for oven function selection on compatible ranges

• Disconnect power to the appliance before attempting service to avoid shock or injury
• Access typically requires removing the control panel or console; handle glass and trim pieces carefully
• Verify alignment and detents before reassembling to ensure proper function

This door switch is a push-button electrical switch that detects when a fridge or freezer door is opened and closed, helping control lights and electrical features. It provides a direct, replaceable way to restore proper door sensing. What it does

• Opens and closes the circuit when the door moves, allowing interior lights and related controls to turn on/off.
• Commonly replaced when interior lights stay on or fail to turn on when the door opens.
• Helps prevent unnecessary compressor runtime when the door is detected as open.
• Compatible with cabinets that use a push-button style door switch mounted in the cabinet or door frame.

• One door switch (single push-button switch)

• Always disconnect power to the appliance before starting replacement to avoid electrical shock.
• Access typically requires removing the door gasket or inner door panel; retain screws and clips for reassembly.
• Replace by unplugging the old switch connector and installing the new switch in the same orientation; verify firm connector seating.
• After installation, restore power and cycle the door to ensure the switch operates lights and controls as expected.

The Door Switch Assembly is an OEM part for LG dryers. It ensures the dryer operates only when the door is securely closed, acting as a safety feature to prevent the dryer from running while the door is open.

Causes of a bad door switch assembly can include regular wear and tear from frequent use, electrical issues such as shorts or faulty connections, or physical damage from forceful door closures or impacts.

Symptoms of a bad door switch assembly include:

• The dryer not starting
• The dryer stopping mid-cycle
• The drum light not turning on or off correctly
• The dryer continuing to run with the door open

This OEM LG part is also compatible with Sears/Kenmore models.

Replacement heater relay for Whirlpool appliances that controls power to the heating element. It restores reliable heat switching so cycles reach the correct temperature when the appliance calls for heat. What it does:

• Switches electrical power to the heating element when the control signals demand heat
• Replaces a failed relay that can cause no heat or intermittent heating
• Helps restore normal heating cycles and consistent performance
• Works with the appliance's control system to enable safe heating operation

• Disconnect power at the breaker or unplug the appliance before servicing
• Use appropriate tools and avoid bending connector terminals; secure all wiring after replacement

This temperature switch is a thermostat-style switch that senses and controls temperature to help the appliance maintain safe operating temps and proper heating performance. Replace a failed switch to restore normal temperature regulation. What it does:

• Senses temperature and opens or closes the circuit based on set thresholds
• Signals the control system to stop or allow heating to prevent overheating
• Commonly associated with no-heat, intermittent heating, or overheating symptoms
• Acts as a safety/limit device in heating circuits

• One temperature switch

• Disconnect power to the appliance before starting any repair
• Handle terminals carefully; ensure secure electrical connections without bending terminals

This switch finish guard is a trim piece that protects and conceals the control switch area, restoring a clean appearance and helping keep debris out of the switch opening. Designed to match the original equipment fit and finish. What it does:

• Covers and protects the control switch opening to prevent dirt and moisture intrusion
• Restores the appliance's factory appearance around the switch area
• Helps keep the switch stable and properly aligned in the control panel
• Useful when replacing a cracked, worn, or missing switch trim piece

• Basic snap-in or screw-in installation; verify fasteners before tightening
• Power off and unplug the appliance before attempting any panel work
• Handle trim pieces gently to avoid cracking; align tabs before seating
• If other switch components are damaged, inspect and replace as needed

This rotary selector switch is the user-control component that routes power between settings so the appliance responds when a knob is turned. Replacing a worn switch restores reliable selection of functions and consistent operation. What it does:

• Routes electrical connection between control knob positions to select oven/burner functions
• Provides tactile detents so the knob clicks into each setting
• Restores consistent on/off or mode changes when the original switch is worn or intermittent
• Common symptom: appliance does not change settings or shows no response when the knob is turned
• Common symptom: intermittent operation or inability to select a function

• Disconnect power to the appliance before starting any repair
• Access typically requires removing the control panel or back cover and the knob; keep fasteners organized
• Verify knob alignment on the new switch and test functions before full reassembly

This switch-plg is the OEM replacement plug switch that completes or interrupts the appliance's power connection, restoring reliable on/off control for the affected circuit. It fits where the original plug-style switch was used. What it does:

• Opens and closes the electrical circuit to allow or stop power flow through the plug-style connection
• Restores on/off control when a worn or failed plug switch causes intermittent power or a unit that won't power on
• Provides the same basic mechanical/electrical function as the original switch in the appliance's plug assembly
• Works as a direct replacement for the factory-installed switch-plg part

• Disconnect power (unplug appliance or shut off breaker) before removing or installing this switch
• Handle terminals carefully; secure terminal connections during replacement
• Compare the new part to the old part for correct orientation and fit before final assembly