Electrolux Manual, Care Guide

This is a replacement rating/nameplate label that restores the appliance identification and safety information printed on the cabinet. It helps keep model, serial and electrical ratings readable for service and safe operation. What it does:

• Replaces a torn, faded or missing rating/nameplate so model and serial info is visible for service.
• Restores printed electrical ratings and manufacturer markings used during diagnostics.
• Helps meet safety and inspection needs by returning legible identification to the appliance.
• Simple peel-and-stick replacement—no tools required for the label itself.

• One replacement adhesive rating/nameplate label.

• Clean and dry the surface thoroughly before applying; remove old adhesive residue.
• Align the label carefully, peel backing, and press firmly from one edge to the other to avoid bubbles.
• Do not place over vents, controls or moving parts; ensure label location is the original flat area on the cabinet.
• This is a non-electrical cosmetic/identification part—no wiring or power disconnection is required to apply, but follow general safety precautions when working on appliances.

This replacement appliance label provides the factory identification and safety information fastened to the appliance so you can read model/serial and safety/warning text clearly. It restores legible markings for servicing and ownership records. What it does

• Shows the appliance identification, model/serial or rating area and factory safety/warning text so technicians and owners can service data.
• Helps ensure required safety and operating instructions remain visible and readable.
• Replaces a torn, faded, or missing label that can make identification and troubleshooting harder.
• Supports accurate parts ordering and service by restoring the original markings.

• One replacement label

• Peel-and-stick replacement; clean and dry the surface thoroughly before applying.
• Align carefully and press from one edge to the other to avoid bubbles; firm pressure ensures adhesion.
• Do not stretch or trim the label unless explicitly specified by the equipment instructions.
• For safety, disconnect power or follow manufacturer safety precautions before working near electrical components.

This replacement adhesive label restores the appliance's original product and rating information so owners can identify model and serial details. It helps keep safety and specification markings legible for troubleshooting and repairs. What it does:

• Replaces a missing, torn, or faded product/rating label so model and serial info remain readable
• Preserves appliance specifications and safety markings used during service and part ordering
• Helps technicians confirm correct parts and diagnostics without guesswork
• Prevents misidentification that can delay repairs or lead to incorrect parts

• One adhesive product/rating label

• Clean and dry the mounting surface before applying; remove old adhesive residue
• Align carefully; press firmly from one side to the other to avoid air bubbles
• Use gloves if handling adhesive-backed labels to avoid fingerprints or oils
• Do not stretch or trim the label; replace with the exact part supplied

This replacement identification decal restores legible equipment labeling so model, rating and safety information are visible for service and ownership. It helps replace faded, torn or peeling labels to improve readability and compliance. What it does:

• Provides a clear, adhesive identification decal with printed model/rating/safety information
• Replaces faded, torn or peeling factory labels that are hard to read
• Helps owners identify the appliance correctly during service
• Maintains visible safety and rating information required for repair or inspection

• Clean and dry the installation surface thoroughly before applying
• Peel backing and press decal firmly, smoothing out air bubbles for full adhesion
• Do not stretch, reposition repeatedly, or apply to wet/oily surfaces
• If label covers a vent or operational opening, confirm placement with service manual

This adhesive appliance label replaces a worn or missing identification/warning sticker so important model, safety or operating information remains visible. Keeps service and safety info readable for owners. What it does

• Replaces faded or damaged identification, rating or warning graphics on the appliance
• Restores legible safety and operating information that helps prevent misuse
• Helps confirm appliance details during troubleshooting and repairs
• Adhesive backing sticks to clean, flat surfaces for a long-lasting replacement

• Clean and dry the mounting surface; remove oils, dust and loose residue before applying
• Peel backing and press the label firmly in place, smoothing out air bubbles
• Replace only on compatible surfaces and locations; do not stretch or fold the label
• If removing old adhesive, use a plastic scraper and a mild solvent in a well-ventilated area; disconnect power to any nearby electrical components before working

This replacement label provides the appliance's identification and rating information so you can restore clear model, serial, and safety marking visibility. It helps owners specifications and service details at a glance. What it does:

• Displays model, serial, and electrical rating information for the appliance
• Restores worn or missing safety and regulatory markings
• Keeps identification visible for warranty and service calls

• One replacement identification/rating label

• Clean and dry the mounting surface before applying; remove any dirt, grease, or old adhesive
• Align carefully and press firmly to ensure full adhesion; allow adhesive to set per room temperature conditions
• Do not place over vents, moving parts, or control openings
• For safety, disconnect power to the appliance before accessing internal areas to reach the original label location

This replacement information label displays factory markings and safety/rating information so your appliance remains properly identified and serviceable. It restores legible identification and compliance markings to the cabinet. What it does:

• Replaces a torn, faded, or missing information/nameplate label
• Restores printed factory markings such as manufacturing and safety/rating text
• Helps service technicians identify the unit and ratings during repair
• Prevents confusion from illegible or absent identification details

• One replacement information label

• Clean and dry the mounting surface; remove any grease or residue before applying
• Align the label carefully, then press firmly from one side to the other to ensure adhesion
• For best results, install at room temperature on a flat, non-porous surface
• No special tools required; avoid sharp objects that could scratch the label or appliance