Estate Parts

Looked Up video. Made job easy! Read more

I ordered a new handle from Applisnce Parts Pros. It fit the refrigerator perfectly. I reused some of the old screws and ordered one new screw with a cover to attach the bottom of the handle. Now the refrigerator looks as good as new! Read more

I ordered a replacement glass from Appliance Part Pros on Friday evening and it was delivered on Monday morning. It was packed well and I appreciated the quick delivery. I watched the Appliance Part Pros video and it was not helpful because it was for a different door but it did have some useful advice. I checked for a few other hints on the internet and then went to work. The door on my oven had to be removed by opening it to the first stop, about four inches, after removing two locking... Read more

My wife noticed that our washing machine was making a terrible rumbling noise and seemed to be out of balance all of the time. She was on the verge of calling a repairman when I said I wanted to look at it first. I noticed the agitator was very loose and would spin in your hand. I removed 1 bolt and the agitator was out. The teeth in the agitator were stripped out so by simply ordering a new agitator and installing it I turned a $250.00 repair call into a $70.00 DIY fix. Thanks. Read more

Watched your very helpful and informative "how to" video and replaced both right and left hinges. Getting the front panel to line up on the clips was the most difficult part. Read more

Replaced upper and lower spray arms, plus nylon bearings. Read more

• Won't start

I removed the burners and replaced the igniters. The burners must be removed because the igniters go underneath them. This job turned out to be very difficult because my stove is 16 years old and the screws holding down the igniters were completely rusted and bound to the stove top, so I had to drill out all of the screws. Also, the burners were bound to the gas flues by mineral deposits and separating them was very difficult. Once I got the stove top up, I threaded the igniter wires to the... Read more

I ordered the burner cap set. Read more

Find the part at Appliance Parts Pros; watch the youtube video on how to replace it and voila! Done in a flash. Thanks Read more

Replaced Defrost timer, Heater element and Bimetal-Def. Since the Refrigerator was older and the parts are not that costly I just replaced them all since I was in there. Read more

A YouTube video: https://www.youtube.com/watch?v=jIdtNdDXFDk , by a professional appliance repair company described replacement of the freezer drain pipe with Kenmore's (by Whirlpool) revised drain pipe. Ice buildup inside the freezer was caused by warm air beneath the freezer contacting cold air from inside the freezer the resulting condensation freezing and blocking the drain, causing the ice buildup inside. The revised drain tube functions as a p-trap to prevent cold/warm air interaction.... Read more

Replaced with new one and followed the instruction from the video that is on the order Read more

Ordered two new springs and clips. Pulled out the bottom drawer and replaced the old spring and the one that had broken. This only took about ten or fifteen minutes and was very easy. Now the door works as it should. Read more

I ordered a new timer knob from Appliance Parts. The knob came, and I went to my washer and screwed it on. That took about 35 seconds. Everything is fine now! Read more

I removed the old one by lifting up and setting aside. I opened the box and set new part in place. There were no screws and other parts to assemble and the install was very easy! Read more

Washer needed a water in let valve. It was very easy !! Read more