Parts for Lg WM8900HBA: F3q7ayk2e.Ableeus Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

These non-skid pads attach to the bottom of the washer's leveling legs to prevent the machine from sliding or walking across the floor during operation. They are made of durable rubber or similar grip material. Replace them if your washer vibrates excessively, moves out of position during spin cycles, or if the existing pads are worn, cracked, or missing.

Rear housing panel that shields internal components and maintains airflow. Replace this outer cover if cracked, broken, or missing to restore protection.

Drum bearing bushing for washers. Installs between drum and bearing assembly. Replace if cracked, worn, or missing to restore proper drum support.

Secures internal washer components and maintains proper alignment. Replace when brackets are worn, broken, or causing rattling. Confirm fit with your model number.

Shipping bolt for laundry centers and washers. Secures the drum during transport. Replace if lost, damaged, or missing after installation or moving.

Washer leaking water during cycles? This outer tub assembly houses the inner tub and holds wash water. Replaces cracked or damaged tubs to stop leaks.

Shipping bolt for laundry center and washer installations. Secures internal components during transport. Replace if bolt is missing, stripped, or damaged.

Fix banging noises, unbalanced loads, or visible damage with this washer inner drum tub assembly. Restores smooth spinning and proper drum rotation.

This is a printed circuit board assembly that controls the display panel on the washer. It processes user inputs from the control panel and displays cycle selections, time remaining, and error codes. Replace this board if the display is blank, flickering, unresponsive to button presses, or showing incorrect information.

Fix washer connectivity issues or unresponsive smart features with this WiFi control board. Restores app control and remote monitoring capabilities.

Replacement drawer support lifter for washers. Holds and guides the drawer for smooth operation. Replace if cracked, broken, or causing uneven movement.

Fix loud spinning, excessive wobbling, or drum movement with this four-arm drum spider. Central support bracket secures drum to drive shaft. Moderate DIY.

Machine screw that fastens brackets, panels, or housings in select washers. Replace when missing, stripped, or damaged to restore secure assembly fit.

Replacement tub bearing allows the drum to spin smoothly. Replace if washer makes loud grinding noise or plane-like sound during spin cycle. Verify fit.

Supports the drum for smooth, quiet spinning. Replace when you hear grinding or loud noises during cycles. Verify fit with your model number.

Washer won't spin or makes grinding noises? The motor rotor bolt secures the rotor to the motor shaft. Requires a 17mm socket for installation.

Seals the rear tub to prevent water leaks during wash and spin cycles. Replace if you notice leaking or bearing noise. Confirm fit with your model.

Replace your washer's damaged or missing cabinet cover panel. This exterior housing component protects internal parts and completes the machine's appearance.

This Screw (drawing) is a factory fastener used to secure appliance panels and components. Replacing a stripped, corroded, or missing screw restores a tight fit, reduces vibration, and helps keep assemblies correctly aligned.

• Secures panels, brackets, and mounting points as specified by the manufacturer
• Replaces screws that are lost, damaged, corroded, or stripped
• Helps address rattling, vibration, or loose-fitting parts caused by missing hardware
• Maintains proper alignment and stability of the assembly

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the screw to its original location; start threads by hand to avoid cross-threading
• Use the correct driver; tighten snugly without over-torquing into metal or plastic
• Refer to your model's parts diagram to correct location and quantity

Secures the outer door boot seal to prevent water leaks. Replace if damaged, rusted, or losing tension. Includes tensioning spring. Verify fit.

Secures and supports your washer door hinge for proper alignment and closing. Replace if door sags, misaligns, or won't seal. Confirm fit with your model.

Concrete counterweight block that stabilizes your washer drum during spin cycles. Replace if cracked, broken, or detached to restore proper stability.

Structural support bracket that mounts the washer door hinge assembly. Replace if bracket is cracked, broken, bent, or causing door misalignment issues.

This multi-connector wiring harness routes power and signals between major components to restore electrical connections and proper operation. It replaces a damaged or worn harness to stop intermittent faults and restore reliable circuit continuity. What it does:

• Provides factory-style wiring and multiple connectors to link control boards, motors, sensors, or switches
• Restores lost or intermittent electrical connections caused by frayed wires, burned terminals, or connector damage
• Helps eliminate symptoms like intermittent operation, failure to start, or parts that lose power unexpectedly
• Matches OEM connector types and wire groupings for direct replacement where specified

• One multi-connector wiring harness as shown

• Disconnect power before starting; follow basic electrical safety procedures
• Inspect connectors and mating terminals for damage before installation
• Route harness to avoid sharp edges and heat sources; secure with existing clips or ties

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

Washer door gasket seals the tub opening to prevent leaks during wash cycles. Replace if cracked, torn, or leaking. Confirm fit with your model number.

Washer screw

Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.

Replace your washer's outer door frame trim if cracked, damaged, or worn. This cabinet trim fits around the door to restore a clean, finished appearance.

Fix a washer door that won't close or latch properly. This locker hook engages the lock mechanism to secure the door during cycles and prevent error codes.

Replacement handle for laundry center doors. Installs on front panel for opening and closing access. Needed when original is cracked, broken, or missing.

The Magnetic Door Plunger is an OEM part for LG washing machines. It is designed to securely hold the door in a closed position during the operation cycle, employing a magnet mechanism for enhanced reliability. The plunger ensures that the door latch is properly engaged, preventing the machine from running if the door is not closed correctly.

Causes of a bad Magnetic Door Plunger can include wear and tear from constant use, failure of the magnetic mechanism due to exposure to moisture or mechanical damage, or a misalignment that prevents the door from closing properly.

Symptoms of a bad Magnetic Door Plunger include:

• The washing machine door not staying closed during cycles.
• The machine failing to start due to a door sensor not detecting closure.
• Random pausing of the machine during operation if the door unlatches.

This OEM LG part is also compatible with Sears/Kenmore.

Washer won't fill or water keeps running? This inlet valve assembly controls water flow into your washer tub. Common fix for fill issues.

The Hot Water Valve is an OEM part for LG washing machines. It regulates the flow of hot water into the wash tub during the appropriate cycles. The valve allows hot water to enter the wash tub to help wash clothes thoroughly and effectively at warmer temperatures.

Causes of a bad hot water valve include mineral or lime buildup inhibiting proper operation, worn internal components due to age and use, or damage from freezing during winter months.

Symptoms of a bad hot water valve include:

• Only cold water entering the wash tub, even on hot cycles
• Fluctuating hot water temperature during cycles
• Leaks from the hot water valve area
• Inability to select hot water temperature settings

This LG part is also compatible with some Kenmore models.

Filters debris from water entering your washer. Replace when water flow is reduced or sediment buildup occurs. Verify fit with your model before ordering.

The Float Assembly is an OEM part for LG washing machines. This part monitors and controls the water level within the appliance. It's a safety feature that prevents water overflow and potential flooding, contributing to the efficient operation of the washing machine by maintaining the correct water level for each cycle.

Causes of a bad Float Assembly can vary from simple blockages that prevent the float from moving freely to electrical faults within the switch mechanism. 

Symptoms of a bad Float Assembly include:

• Water overflowing from the washing machine
• Inadequate water levels that affect the washing cycle's effectiveness
• The washing machine failing to start the fill cycle due to a malfunctioning float switch

This OEM LG part is also compatible with some Kenmore models.

This genuine replacement knob assembly restores positive control and tactile feedback to your appliance's front control. It lets you select settings and turn functions smoothly when the original knob is cracked, loose, or missing. What it does:

• Replaces a worn, cracked, or broken control knob so settings can be selected reliably
• Slides onto the control shaft to provide a secure, easy-to-turn interface
• Helps eliminate slipping, binding, or accidental setting changes
• Restores clear detent positions for accurate setting selection

• Disconnect power to the appliance before starting any repair.
• Pull the old knob straight off the control shaft; no tools usually required. If necessary, use gentle leverage with a flat tool to avoid damaging the control panel.
• Align the replacement knob with the shaft flat and push fully onto the shaft until seated.
• If the knob has a retaining clip or set screw, verify it is secure before restoring power.

Washer drawer panel assembly that forms the front face of the detergent dispenser drawer. Replace if your original panel is cracked, discolored, or damaged.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replaces damaged or worn leveling leg to stabilize your washer. Height-adjustable support reduces wobble and restores level positioning for smooth operation.

Fix leaking from under the detergent dispenser with this washer dispenser box. Solves cracks or breaks that compromise the dispenser structure.

This drain hose cap seals and secures the refrigerator defrost drain outlet so meltwater is directed into the drain hose instead of pooling in the cabinet. Replaces a worn or damaged cap to help stop interior leaks and water buildup. What it does:

• Seals the defrost drain outlet to prevent water from spilling into drawers or onto shelves.
• Guides defrost/meltwater into the drain hose and toward the drain pan.
• Helps reduce odors and pests entering through an open drain opening.
• Fits onto the drain outlet to replace cracked, missing, or loose caps.

• Disconnect power before working inside the refrigerator to avoid electrical hazard.
• Remove shelves and drawers as needed to access the drain outlet; clear any visible debris or ice first.
• Press the cap firmly onto the drain outlet/hose until fully seated; avoid excessive force or prying tools.
• After installation, pour a small amount of warm water down the drain to confirm proper flow and seating.

Connects detergent dispenser to washer tub. Replace if cracked, leaking, or clogged with detergent buildup. Verify fit with your model number.

The Vent Hose is an OEM part for LG washing machines. This hose is essential for ensuring proper ventilation within the washer, allowing air to circulate and preventing the buildup of moisture and mildew. It helps maintain the efficiency of the washing machine by facilitating the expulsion of air and excess water vapor during operation.

Causes of a bad washer vent hose can include wear and tear over time, blockages from lint or debris, or damage due to bending or pinching.

Symptoms of a bad vent hose include:

• Excessive moisture or condensation inside the washer
• Musty odors from the washing machine
• Visible cracks or holes in the hose
• Poor ventilation leading to inefficient washing cycles

This OEM LG part is also compatible with Sears/Kenmore.

Includes sensor probe

Directs water from inlet valve to detergent dispenser in LG washers. Replace if hose is cracked, leaking, won't stay attached, or damaged from wear.

Fix washer not filling or slow fill issues with a new water inlet hose. Connects your water supply to the fill valve. Easy 15-minute repair.

Connects household water supply to your washer inlet valve. Replace this hose if it's cracked, leaking, or worn to restore safe water flow during cycles.

Washer not draining or water sitting in tub? This drain pump assembly removes water during and after wash cycles. Moderate DIY repair in 30-45 minutes.

Drain hose carries used water from washer to household drain. Replace if cracked, leaking, deteriorated, or damaged to prevent water overflow issues.

Washer won't spin or agitate? The stator assembly creates the magnetic field that drives the motor. Restores proper basket movement and agitation.

Leaking water connection at the inlet? This hose connector restores a secure, leak-free seal between the supply hose and washer inlet valve.

Fix grinding noises or a drum that won't spin with this washer motor rotor assembly. Common when spline teeth strip. Moderately difficult repair.

Leaking water line? This washer hose connector joins the water supply securely to stop leaks and restore proper flow. Simple DIY fix in minutes.

Water leaking from filter area or drain error? This washer pump filter traps lint and debris. Easy DIY fix with video guide—most install in minutes.

Washer won't fill properly or overfills? The pressure switch monitors water levels and signals when to stop filling. Moderately easy DIY repair.

This is a suspension spring that connects the outer wash tub to the frame of the washer. It absorbs vibration and helps stabilize the tub during the spin cycle. Replace this spring if the washer vibrates excessively, makes loud banging noises during spinning, or if the tub appears to sit unevenly when the machine is at rest.

The Holder is an OEM part for LG front-loading washing machines. It is a plastic mounting bracket or suspension system that attaches to the rear of the washer tub and helps secure internal components like hoses, pulleys, and the rear bearing in place during spin cycles. Subject to force and vibration, the holder must withstand years of washing use.

Symptoms of a bad holder include: 

• Loosening or detaching internal parts leading to noise and imbalance
• Cracking or damage of the plastic bracketry 
• Bearing or tub damage from improperly secured components

Causes can be fatigue from repeated wash cycles, stress cracks from heavy loads, or material deterioration over time. Replace with this OEM LG holder to maintain drum balance and suspend components securely. It is also compatible with Sears/Kenmore front-load washers.

If your washer won't turn on or has intermittent power issues, the power cord assembly may be damaged. This cord delivers mains electrical power safely.

Drain hose assembly connects your washer tub to the household drain. Replace if cracked, kinked, leaking at connections, or worn from age and use.

Pivot hanger assembly that supports and stabilizes washer components. Replace if worn, damaged, or causing misalignment to restore smooth movement.

Washer won't start or shows dE/door lock error? This door switch detects if the door is closed so the cycle can begin. Easy DIY repair with video guide.

Secures rubber hoses to fittings with constant spring tension to prevent leaks. Replace when rusted or weakened to maintain a tight seal. Confirm fit.

This sensor assembly detects vibration and out-of-balance conditions during the washer's spin cycle. It mounts to the washer's tub or frame and sends signals to the control board to adjust spin speed or pause the cycle when excessive vibration is detected. Replace this sensor if the washer frequently stops mid-spin, displays an out-of-balance error code, or fails to reach full spin speed even with a properly balanced load.

This sensor assembly monitors operating conditions and sends signals to the appliance control board so the unit can regulate performance. It replaces a damaged or faulty sensor harness to restore reliable sensing and control. What it does

• Detects and transmits condition data (temperature/operational status) to the control board
• Helps the appliance maintain correct operating cycles and performance
• Common symptom: incorrect temperatures, poor performance, or repeated sensor-related error codes
• Common symptom: appliance intermittently stops or behaves erratically when a sensor is failing

• Disconnect power before accessing or replacing the part to avoid shock or damage
• Handle the connector and wiring gently; ensure connectors are fully seated and latched
• Replace only with the exact part number to avoid fit or function issues

Fix a washer that won't start, stops mid-cycle, or shows error codes with this main power control board. Moderate skill repair taking 30-45 minutes.

Secures washer hoses to pumps, tubs, and drain fittings to prevent leaks. Replace when weakened, rusty, or damaged to maintain tight connections.

Secures washer hoses to pumps, tubs, and drain fittings to prevent leaks. Replace when weakened, rusty, or damaged to maintain tight connections.

Secures hose connections to prevent leaks in your washer. Replace if corroded, rusted, or leaking around hose fittings. Confirm fit by model number.

Fix washer leaks with this hose clamp. Secures hoses to pumps and valves, preventing water leaks and disconnections during wash cycles. Simple repair.

The NOISE FILTER ASSEMBLY is an OEM part for LG washing machines. It is a component designed to minimize vibrations and reduce noise emanating from the washer during operation. Proper noise damping is important for smooth functionality without disturbance.

Causes of a bad noise filter assembly can include cracks or tears developing over extended use. Physical damage from impact could also compromise its noise-blocking abilities. 

Symptoms of a bad noise filter assembly include:

• Loud banging or clanking noises during wash and spin cycles
• Excessive vibrations felt through the washer cabinetry 
• Increased stress on other components from inadequate dampening
• Premature wear of suspension components like legs and runners

Replace yours today with this genuine OEM LG part to restore a quiet wash experience. This replacement assembly ensures optimum vibration control. It is also compatible with Sears/Kenmore models.

Seals the front panel to tub on front-load washers. Replace if torn or deformed to stop leaks and restore a watertight door seal. Confirm fit by model.

Fix washer leaks or weak water spray with this connector nozzle. Channels water between internal components when worn nozzles cause drips or poor flow.

This is an LED light assembly that mounts inside the washer to provide interior illumination. It allows you to see the drum contents when the door is open or during operation. Replace this assembly if the interior light no longer turns on, flickers, or appears dim.

Fix water leaking from your washer dispenser or misdirected flow with this dispenser water guide channel. Routes water properly to prevent splashing.

Replacement tub to pump hose for washers. Transports water from the wash tub to the drain pump. Replace if cracked, split, leaking, or damaged from wear.

Secures the door boot seal to prevent leaks during wash cycles. Replace if corroded, loose, or if water leaks from the door area. Confirm fit with model.

Pressure sensor air chamber for washers. Connects the tub to the water level switch. Replace if cracked, clogged with detergent residue, or leaking air.

Routes water from supply to washer. Replace if cracked, leaking, or clogged to restore proper fill. Confirm fit with your model number before ordering.

Replace your washer's drain hose if cracked, leaking, or damaged. Connects the pump to the standpipe for proper water drainage during wash cycles.

Joins two internal water lines in your washer. Replace this coupler if cracked, worn, or leaking to restore a secure connection during fill and wash cycles.

The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.

Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.

Symptoms of a bad clamp include:

• Water leaking from hose connections
• Hoses coming loose or detaching during operation
• Visible rust or damage on the clamp
• Poor water flow or pressure issues

This OEM LG part is also compatible with Sears/Kenmore models.

Shock absorber kit reduces vibrations and stabilizes the drum during wash cycles. Replace if worn, leaking, or causing excessive movement and noise.

Locking pin for shock absorber.

Fix a washer that won't drain or has standing water with this drain pump motor assembly. Powers the pump to remove water during drain cycles.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.