Freezer Parts

Purchased new gasket from your site. Watched the video for how to change it.Took about 15 min. to remove the old one and install the new one. Read more

• Won't start
• Too warm

I unplugged the freezer, removed the old control board by prying it out with my hands and then pressed in the new control board with my hands. The freezer functioned normally after it was plugged into the wall outlet again. Someone with large hands or short fingernails might benefit from the use of a straight blade screwdriver while prying out the broken control board. Read more

Replaced It With New One Read more

• Freezer too cold
• Freezer not defrosting
• Fridge runs too long
• Fridge too cold

My Frigidaire side by side refrigerator/freezer suffered a catastrophic failure. The symptoms were as follows: 1) Frig not cold 2) No Ice being made in the freezer section 3) Items at the back of the freezer were frozen but items on the door shelves would not freeze. The back of the freezer was cold but the closer you got to the door the warmer it got. After removing everything from the unit I saw that there was substantial ice buildup on back of the freeze, specifically around the vents,... Read more

I ordered a replacement handle and screws. The process was very easy with the help of one of your "pros" who found all the parts needed and took my order. I didn't realize I was getting both a refrigerator door handle and a freezer door handle in one set, but now we have the freezer handle if we need it. Removing the old handle and installing the replacement was very easy. It looks great, in fact the replacement is metal, whereas the original was plastic, so it looks better than it ever did! Read more

Condenser fan stopped on my big 2003 Monogram 4 foot wide ZIS480D Refrigerator. It is top mounted. The fridge had to be rolled out. 20 screws removed and the top sheet metal to get at the condenser. That was the only way to get at it. Works like new now. Read more

I had found that the fan in the freezer was making a lot of noise. Turns out the shaft was loose, causing the flan blade to wobble. Replaced the motor and fan and now it runs like a new unit. Read more

Repair took 20 minutes - 1 minute to set the new, non-broken shelf in place, and then 19 minutes teasing my spouse about the fragility of glass and multiple repetitions of the phrase "This is why we can't have nice things!" Probably worthwhile to program in 10 additional minutes to allow you to apologize to your spouse for ridiculing them for an honest mistake:) Read more

In short - I replaced the evaporator fan motor and the evaporator fan blade. The Appliance Parts Pros website was extremely helpful to me. Here's how. 1. The site helped me identify that even though my Freezer says it's a Frigidaire, it's actually an Electrolux. 2. The site identified the potential screech causing parts. (I didn't take a chance, I bought all three) It was a worthwhile investment. My freezer is 20 years old so it deserved some help. 3. The site provided guidance videos (not... Read more

• Marks left on clothes
• Noisy

I'm new to how a dryer works, so I just started taking it apart to see what exactly was causing it. The video examples on the APP website were all amazing. It gave me a good idea of what I was getting into and showed me the common repair issues. The dryer being 12 years old, I was on the fence about repairing or replacing. However, once I got a list of parts I might need and getting the confidence by watching the videos, I said "what have I got to lose." The cause of the scraping and loud... Read more

• Frost buildup

Arrived on time and was a good fit. no problems at all thank you Read more

No problem, 1 min to fix Read more

I look on the internet i came a cross appliance parts pros i didnt no what i was looking for so i call the phone number talk to someone gave him the info he ask for they has what i was looking for in stock the guy was very nice he say i will get the part in two days and i got it in two days if i need a part for anything else i will ckeck out appliance parts pros when the door gasket came my grandson put it on in a flash Read more

I replaced it with the Mfg. parts bought from AppliancePartsPros.com. The job went very smoothly, I received the parts a day and one-half after ordering them from your website. I am an HVAC contractor and was so pleased with your service that I'll use you again and again. Read more

• Noisy
• Freezer section too warm
• Fridge too warm

Once I purchased the correct motor it literally took less that 10 minutes from start to finish to replace the motor. After unplugging the refrigerator, I unscrewed two machine screws to remove the cover and unscrewed two machine screws to remove the motor. I removed the old motor from the housing, installed the new motor, reattached the motor to the refrigerator, replaced the cover, and plugged in the refrigerator. Installation was quick and simple. AppliancePartsPros service was excellent... Read more

The gasket on my freezer door was not holding the door closes. When the main door closed, the pressure which shifts to the freezer was popping the door open and it was not closing because the magnet had lost its' mojo. I watched the video for the replacement of the gasket on the freezer door and my experience was exactly the same. One area that you should be mindful of: the depth of the fin on the replacement gasket is short, so do not make the slot of this fin too deep. When you are... Read more