Frigidaire Knob, Dial & Button

Color: white. Measures about 1-1/2 inches in diameter.

Color: white. Measures about 2 inches in diameter.

Color: white. It measures about 3 inches in diameter.

The Knob is an OEM part for Frigidaire ranges. It is located on the front control panel and facilitates setting the exact temperature or heat level for cooking. Each individual knob directly corresponds to a specific burner or oven function.

Causes stem from natural wear through frequent manual operation. Harsh cleaning chemicals or accidental impacts can also damage knob surfaces or mechanics over time.

Symptoms of a bad knob can include:

• Looseness making it difficult to turn 
• Becoming illegible with labels fading 

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This is a control knob that is used on ranges and stoves. The control knob is used to turn the burner on and adjust heat. Sometimes, the knobs can be damaged or come off and be lost. In some cases, the knob can also become loose on the base and hard to use.The process of replacing the control knob is simple and requires no tools. First, make sure the stove is turned off and is cool to the touch. Locate the knob that is broken or damaged and pull it away from its base. If it is stuck, a screwdriver can be used to pry it up. Place the new control knob on the base and press it in to secure it.This control knob is designed to be compatible with ovens, ranges, and stoves manufactured by Tappan, Frigidaire, and Crosley. It is sold as an individual item. This is a genuine OEM replacement part that is sourced directly from the manufacturer.

Color: white. It measures about 1-3/4 inches in diameter.

The Range Knob is an OEM component specifically designed for Frigidaire ranges. It provides an intuitive interface for setting the desired temperature, function or timers. 

Causes of a bad knob can include stripped or worn-down lettering making the markings illegible over time. Repeated turning and adjustment of the knob can cause cracks or breaks in the plastic material. 

Symptoms of a bad knob include:

• Difficulty gripping or turning the knob to select settings  
• Knob spinning freely without engaging desired function
• Knob detaching completely from the electronic control board

This authentic OEM replacement knob is compatible also with Electrolux, Gibson, Kelvinator, and Kenmore ranges.

This damper control knob fits the refrigerator's air damper. It attaches to the damper control so you can open or close airflow between the freezer and fresh food compartments when the original knob is cracked, stripped, or missing.

• Attaches to the damper control shaft to adjust airflow from the freezer into the refrigerator compartment
• Direct replacement for a knob that is broken, missing, or stripped
• Symptoms can include a loose or slipping control, difficulty turning, or settings that won't stay in place
• If the control can't be turned, temperature response to damper adjustments may be inconsistent

• Disconnect power to the refrigerator before servicing
• Pull the old knob straight off the control shaft; avoid prying to prevent damage
• Align the new knob with the shaft and press it on until fully seated
• Rotate through the full range to ensure smooth operation without forcing

Color: White

This control knob replaces a worn or broken dial so you can select settings smoothly again. It restores a secure grip and clear pointer alignment, returning normal operation and a like-new look to your appliance. What it does:

• Attaches to the control shaft to operate the switch or thermostat
• Restores accurate selection when the original knob is cracked, stripped, loose, or missing
• Helps ensure the pointer/indicator lines up for clear settings
• Common symptoms: knob spins without turning the control, falls off, or is hard to grip

• 1 control knob

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the shaft; avoid prying at an angle
• Align the new knob with the keyed/flat shaft and press straight on until fully seated
• If your model uses a spring insert/retainer inside the knob, ensure it's properly seated or transfer it from the old knob

This replacement surface burner control knob restores a clean, precise feel to your range controls so you can set heat levels confidently. Ideal for replacing a cracked, stripped, or missing knob.

• Attaches to the burner valve or switch stem to select heat settings
• Common symptoms: knob wobbles, cracks, slips, or won't stay aligned with settings
• Restores accurate pointer alignment and consistent turning feel
• If the stem itself is damaged, the underlying valve/switch may also need service

• Turn the appliance off and allow all surfaces to cool
• Pull the old knob straight off the stem—do not pry against the panel
• Align the new knob with the stem and press straight on until fully seated at Off
• Rotate through all settings to confirm smooth operation

Color: white. Measures about 2 inches in Diameter.

The Knob is an OEM part for Frigidaire ranges. This component allows users to control the heat levels of the burners or the oven by turning the corresponding control shaft. It ensures precise adjustments for cooking and baking.

Over time, the knob can wear out or break due to frequent use, exposure to heat, or accidental impacts. Causes of a bad knob include cracking, stripping of the internal connection, or the knob becoming loose and difficult to turn.

Symptoms of a bad knob include:

• Difficulty in turning the knob
• Inconsistent or unresponsive heat adjustments
• The knob becoming loose or falling off
• Visible cracks or damage to the knob

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This control knob attaches to the appliance's control shaft so you can turn settings on and adjust levels. Replacing a cracked or missing knob restores smooth, positive control of your range or cooktop.

• Attaches to the control switch shaft to select Off/On and heat or function levels
• Restores proper feel when the original knob is cracked, stripped, loose, or missing
• Typical symptoms include: knob spins freely, wobbles, is hard to turn, or won't stay aligned
• Durable replacement to maintain accurate, repeatable adjustments

• Disconnect power and/or gas supply and allow all surfaces to cool before servicing
• Pull the old knob straight off the control shaft; avoid prying against the panel
• Align the new knob with the shaft and press straight on until fully seated
• After installation, verify the control turns smoothly and points to the correct settings

This is a replacement control knob for range models. It lets you turn the valve or switch to adjust burner or oven settings, restoring a secure grip and clear control when the original knob is worn, broken, or missing.

• Rotates the control shaft to set heat levels or functions
• Helps when the knob is cracked, stripped, loose, or missing
• Restores accurate, easy adjustment of the control
• Direct-fit design for the specified control shaft style

• Disconnect power and allow the appliance to cool before service
• Pull the old knob straight off the control shaft
• Align the new knob with the flat/D-shaft and press firmly into place
• Test for smooth rotation and proper engagement of the control

This replacement control knob restores simple, reliable operation for an appliance control so you can adjust heat, power or function settings with a secure grip. It replaces a cracked, loose or missing knob to make controls usable again. What it does

• Provides a secure grip to turn and set appliance controls.
• Replaces knobs that are cracked, worn, loose or missing.
• Restores basic user control over temperature, power or function settings.
• Helps prevent accidental slips when adjusting controls.

• Always disconnect power to the appliance before servicing electrical components.
• Remove the old knob by pulling it straight off the control shaft; align the new knob and push on until fully seated.
• Do not force the knob onto the shaft—if it won't seat easily, verify shaft type and orientation.