Frigidaire Refrigerator Parts

This drain tube routes defrost water from the freezer evaporator to the drain pan at the bottom of the refrigerator, helping keep moisture out of the compartments and preventing puddles or ice from blocked or damaged tubing.

• Directs defrost meltwater from the evaporator drain to the rear drain pan for evaporation
• Replaces a clogged, cracked, or misshapen tube that can leak or back up
• Common symptoms include water under crisper drawers, ice on the freezer floor, or puddles beneath the unit
• Restores proper drainage to reduce repeat ice buildup and standing water

• Unplug the refrigerator before servicing and pull it forward for rear access
• Remove the old tube from the cabinet drain port and pan; clear the drain opening with warm water to melt any ice or debris
• Seat the new tube fully on both ends and avoid kinks or sharp bends
• After installation, pour a small amount of warm water into the drain to verify proper flow to the pan

The Door Handle Set is an OEM part for Frigidaire refrigerators, ensuring a perfect fit and finish for your appliance. This set includes handles for both the refrigerator and freezer doors, designed to replace broken or worn-out handles, providing a secure and comfortable grip for opening and closing the doors.

Causes of damage to the door handle set typically involve physical stress, such as excessive force when opening or closing the door, accidental impacts, and general wear and tear over time. 

Symptoms of a bad Door Handle Set include:

• Handles that are loose or detached, making it difficult to open the door
• Cracked, broken, or worn handles that can lead to injury or further damage to the door
• Difficulty in aligning the handles during installation, indicating potential warping or damage

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Upper Crisper Pan is an OEM replacement part for Frigidaire refrigerators. Located on the slidable tracks inside fresh food section that holds the vegetables/produce. The pan measures about 16-1/2 inches wide by 8 inches high by 16 inches deep. The drawer front is not included for lower pan order 5303289501.

Causes of a bad upper crisper pan may be cracks in plastic developing over extended use, stains that render it unsuitable for food contact, or warping from exposure to wet environments inside the crisper.

Symptoms of a bad upper crisper pan include:

• Leaks and stains below the drawer from collected liquids overflowing the pan
• Difficulty organizing and separating different items stored in the crisper

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

This refrigerator water tube carries water between internal components such as the inlet valve, filter/reservoir, dispenser, or ice maker. Replacing a brittle, kinked, or leaking tube helps restore proper water flow and prevents messy leaks. What it does:

• Routes water within the refrigerator's water and ice system
• Helps deliver water to the dispenser and/or ice maker
• Common symptoms of a bad tube: leaks, poor dispenser flow, no ice production, visible cracks/kinks, or dripping at connections
• Restores dependable water delivery when tubing is damaged

• 1 water tube

• Unplug the refrigerator and shut off the water supply before servicing
• Note the tube's routing and connection points; take photos for reference
• Cut tubing ends squarely if trimming and fully seat into existing fittings
• Turn water back on and check all connections for leaks; flush the system to clear air

The Freezer Shelf is an OEM part for Frigidaire freezers. It provides additional storage space within the freezer, allowing for organized storage of frozen foods. The shelf is designed to fit securely within the freezer compartment, supporting the weight of various frozen items.

Common causes of a bad freezer shelf include cracking or breaking due to heavy loads, wear and tear from frequent use, or damage from accidental impacts.

Symptoms of a bad Freezer Shelf include:

• Visible cracks or breaks in the shelf
• Difficulty in fitting the shelf securely within the freezer
• The shelf not staying in place or collapsing under weight

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Leveling Leg Assembly is an OEM part for Frigidaire ranges. This part provides stability by allowing users to adjust the height of the range, ensuring it is level and balanced on the floor.  

Causes of a bad leveling leg assembly can include wear from frequent adjustments, damage due to heavy loads, or breakage from accidental impacts.  

Symptoms of a bad leveling leg assembly include:

• The range being uneven or wobbling
• Difficulty in leveling the range using the legs
• Noise or movement when the range is in use
• Doors not aligning properly

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The PC Board is an OEM replacement part for Frigidaire refrigerators. As the central "brain" of the refrigerator, it controls all electronic functions and directs operational tasks. The board receives input from sensors and buttons to orchestrate temperature regulation, defrost cycles, lighting, and more.

Causes of a bad PC board can include failure over time due to heat exposure, power surges damaging sensitive electronic chips, or liquid ingress corroding circuitry.

Symptoms of a bad PC board include:

• The refrigerator failing to cool or fluctuating temperatures
• Lights not turning on or functionality issues with buttons/displays
• Abnormal mechanical noises or failure to engage components

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Shelf "Spill-Safe" is an OEM part for Frigidaire refrigerators. This shelf is designed to hold food items securely while also featuring a spill-safe design that contains spills and prevents liquids from dripping onto lower shelves.  

Causes of a bad shelf can include cracks or breaks from heavy items, warping due to temperature changes, or damage from accidental impacts.  

Symptoms of a bad shelf include:

• Cracks or visible damage on the shelf surface
• Difficulty in positioning or stabilizing the shelf
• Warping or bending of the shelf
• Spills leaking onto lower shelves

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This auger drive bar links the dispenser motor to the ice bucket auger, transmitting torque to move cubes or crushed ice to the chute. Replacing a worn or stripped bar restores consistent, reliable ice dispensing. What it does:

• Couples the dispenser motor to the auger/crusher assembly
• Transfers rotation so ice advances to the dispenser chute
• Interfaces with the cube/crush selector mechanism
• Common symptoms include the motor running but no ice dispensing, intermittent dispensing, the auger not turning, or grinding/clicking from the dispenser

• 1 auger drive bar

• Disconnect power and remove the ice bucket before servicing
• Note the bar's orientation; remove any retainers and separate it from the yoke/coupler
• Align the new bar with the mating parts and seat it fully; transfer any reusable retainers
• Reinstall the bin and test both cube and crush selections

The Main Power Control Board is an OEM replacement part for Frigidaire refrigerators. It is the central processing unit that controls all electrical functions and components within the refrigerator. The board receives input signals, processes them, and sends output signals to regulate temperature, monitor sensors, power accessories, and run diagnostics.

Symptoms of a bad main power control board include:

• Fluctuating or inconsistent temperatures  
• Components not functioning properly
• Error codes appearing
• Intermittent or complete power failures

Causes of failure can include moisture damage, power surges, component degradation over time, or physical damage.

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Main Power Board is an OEM part for Frigidaire refrigerators. This board controls and manages the primary functions of the refrigerator, including temperature regulation, defrost cycles, and the operation of other electronic components. It serves as the central hub that ensures the appliance runs efficiently and effectively.

Causes of a bad power board can include electrical surges, overheating, or component wear over time. Exposure to moisture or accidental impact can also damage the board, leading to operational issues.

Symptoms of a bad Main Power Board include:

• The refrigerator not cooling or freezing properly
• Intermittent or complete loss of power
• Error codes displayed on the control panel
• The refrigerator running continuously without cycling off

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Compressor Start Device is an OEM part for Frigidaire refrigerators. It plays a critical role in initiating the compressor, which is essential for the cooling process. This device helps the compressor start smoothly and efficiently, ensuring your refrigerator maintains the desired temperature.

Causes of a bad compressor start device can include electrical issues, normal wear and tear over time, or damage due to power surges or voltage fluctuations.

Symptoms of a bad compressor start device include:

• The refrigerator not cooling properly
• Clicking noises coming from the back of the refrigerator
• The compressor not starting or running intermittently
• Overheating of the compressor

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Frigidaire humidity control slide is an OEM replacement part responsible for regulating and adjusting the humidity levels within the crisper drawers of a refrigerator. This slide is found on the fresh food drawer to allow adjustment of the amount of moisture retained in the crisper drawers, which is essential for preserving the freshness and crispness of fruits and vegetables.

By adjusting the humidity control slide, users can create an ideal environment for different types of produce, ensuring that they stay fresh for longer periods and preventing food waste from wilting or drying out prematurely.

This part fixes the following symptoms

• Inability to adjust or control the humidity levels within the crisper drawers.
• Produce items wilting or drying out quickly due to improper humidity regulation.
• The control slide becoming loose, stuck, or difficult to move.

This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Includes service line.

The User Control and Display Board is an OEM part for Frigidaire refrigerators. This part provides the interface for setting temperatures and controlling various functions of the refrigerator, displaying information like temperature settings, and error codes.

Common causes of a bad control and display board include electrical surges, wear and tear of electronic components, or damage from moisture or heat exposure.

Symptoms of a bad User Control and Display Board include:

• The display not lighting up or showing incorrect information
• Buttons not responding to inputs
• Inability to change temperature settings
• Error codes or malfunctioning indicators on the display

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Color: white. Measures about 11 inches wide by 4-1/2 inches high by 5 inches deep.