General Electric Pump

The Drain Pump is an OEM part for GE washing machines. It is responsible for removing water from the washer's tub at the end of each wash cycle, ensuring that your laundry is properly drained before the spin cycle. This pump helps to prevent water from sitting in the tub, which can lead to mold and mildew.

Symptoms of a bad Drain Pump include:

• Water not draining out of the washer, leading to stagnant water pooling in the tub.
• Unusual noises during the drain cycle, indicating a struggle or failure to operate.
• The washing machine stopping abruptly before or during the drain phase.

Causes of a bad drain pump can include blockages from small garments or debris, mechanical failure from wear and tear, or electrical issues that affect the pump's power supply.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dishwasher Sump is an OEM part for GE dishwashers. This part is located at the bottom of the dishwasher and serves as a central hub where water is collected and recirculated during the wash and rinse cycles. The sump houses the dishwasher's pump and filter assembly.  

Causes of damage to the dishwasher sump can include the accumulation of hard food particles or foreign objects that can lead to blockages or damage to the sump's structure.

Symptoms of a bad Dishwasher Sump include:

• Poor cleaning performance 
• Water not draining correctly or completely
• Unusual noises during operation 
• Leakage from the bottom of the dishwasher 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The GE Pump and Motor Assembly is an OEM part for GE dishwashers. It is the component responsible for circulating water and draining dirty water during all dishwasher cycles. The motor powers an impeller inside the pump body to transfer water from the bottom of the tub back to the upper spray arm for rinsing and removal of food soils from dishes.

Symptoms of a bad pump and motor assembly include:

• Incomplete or slow draining of water after cycle completion
• Water not circulating effectively to spray dishes during wash and rinse stages
• Loud humming or grinding noises coming from inside the dishwasher tub
• Leaks in the tub or base of dishwasher from deterioration of the pump seals

Causes of failure can be normal wear and tear over time, mineral or grit buildup within the pump impeller that reduces flow efficacy, or moisture damage to the motor windings.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Complete GE Pump and Motor Assembly is an OEM replacement part for GE dishwashers. This assembly is integral to the dishwasher’s functionality, as it combines both the pump and motor components that work together to circulate water during the wash and rinse cycles. The pump forces water through the spray arms, while the motor drives this process, ensuring thorough cleaning of the dishes.

Over time, the pump and motor assembly can wear out due to constant use and exposure to water and detergents. Additionally, debris or hard water buildup can clog the pump, causing strain on the motor and leading to failures. Electrical issues or damage from power surges can also impair the assembly's performance.

Symptoms of a bad pump and motor assembly include:

• The dishwasher not cleaning dishes properly
• Water not circulating or spraying during cycles
• Unusual noises, such as grinding or humming, coming from the dishwasher
• Water not draining properly from the tub
• The dishwasher not starting or completing cycles

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The GE pump is an OEM replacement part responsible for removing wastewater from the washing machine during the drain cycle. It pumps out the soiled water from the washer's tub, ensuring that it is expelled through the drain hose and into the plumbing system or utility sink. The pump consists of an electric motor and an impeller that move the water effectively.

Causes of a bad pump can include clogging from debris or lint, wear and tear from regular use, or damage to the pump impeller or motor. Exposure to harsh chemicals or overloading the washer can also contribute to pump failure.

Symptoms of a bad pump include:

• Water not draining from the washer
• Unusual noises such as humming or grinding during the drain cycle
• Error codes related to drainage issues
• Water leaking from the bottom of the washer

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Sump is an OEM replacement part specific to GE-brand dishwashers. Located at the bottom of the wash chamber, the sump collects dirty water from each wash cycle.  

Causes of a bad sump can include cracks that leak water or mineral buildup clogging drain components over extended use. Improper drainage prevents the machine from functioning as designed.

Symptoms of an issue with the sump include: 

• Puddles or water leaks inside or outside the dishwasher 
• Standing water not fully draining after each cycle
• Moisture damage risking other internal parts

This part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Pump Assembly is an OEM part for GE washing machines. This assembly is responsible for removing water from the washer during the drain cycle. It ensures that water is efficiently pumped out of the washing machine and into the household drain, allowing the appliance to proceed through its wash and spin cycles without issues.

Causes of a bad drain pump can include blockages from debris or lint, electrical failures, or wear and tear from regular use. A malfunctioning pump can lead to drainage issues, leaving water in the washer and preventing the machine from completing its cycles.

Symptoms of a bad drain pump assembly include:

• Water not draining from the washer
• Unusual noises during the drain cycle
•  The washer stopping mid-cycle due to drainage issues
• Water leaks from the pump area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Pump Drain is an OEM part for GE washing machines. This component is responsible for removing water from the washer drum during the drain cycle, ensuring that the water is efficiently expelled from the machine. The pump drain plays a crucial role in the washing machine's ability to complete its cycles and maintain optimal performance.

Over time, the pump drain can become clogged, worn out, or damaged due to regular use or foreign objects obstructing the pump. Common causes of a bad pump drain include buildup of debris, wear and tear on the pump mechanism, or blockages from items accidentally left in pockets.

Symptoms of a bad pump drain include:

• Water not draining from the washer
• Unusual noises during the drain cycle
• The washer stopping mid-cycle due to drainage issues
• Water leaking from the bottom of the washer

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Pump is an OEM component for GE dishwasher models. Located at the bottom of the dishwasher tub, this pump works to remove dirty water from the wash cycle and drain it out of the appliance. It is a vital component responsible for fully clearing all water from the dishwasher.

Causes of a bad drain pump can include a clogged or restricted impeller which prevents proper water drainage. Sediment buildup over time can reduce the pump's efficiency. The motor or internal mechanics may also fail due to extensive use. 

Symptoms of a bad drain pump include: 

• Incomplete draining of water at the end of cycles
• Puddles or standing water left in the bottom of the tub
• Smelly dishwasher from stagnant water issues 
• Error codes related to draining problems

This OEM GE part is also compatible with some Kenmore dishwashers. 

The Inlet Sump is an OEM replacement part for GE dishwashers. Located at the bottom of the dishwasher tub, the carefully contoured inlet sump collects and transports dirty wash water containing food debris to the filtration system. Its inlet ports and drainage routes optimize flow for thorough cleaning cycles. 

Symptoms of a problem with the inlet sump include:

• Poor drainage or water not properly collecting at the bottom of the tub
• Clogged or leaking drainage valves that impact water circulation  
• Buildup of food or grime that blocks water movement  

Causes can be normal wear and accumulation of debris over time. Mineral deposits from hard water may also cause drainage issues.

This part is also compatible with Hotpoint and some Kenmore dishwashers.

The Pump and Motor Assembly is an OEM replacement part for GE dishwashers. It works to circulate water throughout wash and rinse cycles. The motor spins the integrated pump impeller to draw fresh water into the dishwasher and drain used water.

Causes of a bad pump and motor assembly can include mineral buildup on pump parts inhibiting water flow, worn motor windings reducing efficiency, or damage from freezing temperatures.

Symptoms of a bad pump and motor assembly include:

• Inability to fill or drain water from the dishwasher
• Abnormal noises coming from the motor area
• Leaks or water not circulating properly

This OEM part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Pump Assembly is an OEM part for GE dishwashers. This component is responsible for removing water from the dishwasher during the drain cycle, ensuring that your dishes are cleaned and rinsed effectively. The pump works by expelling the used water through the drain hose and into the household plumbing.

Common causes of a bad drain pump assembly include blockages from debris, wear and tear from regular use, or electrical issues that prevent the pump from operating correctly.

Symptoms of a bad Drain Pump Assembly include:

• Dishwasher not draining properly
• Standing water in the bottom of the dishwasher
• Unusual noises during the drain cycle
• Dishwasher stopping mid-cycle with a full tub of water

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Pump Drain Assembly is an OEM part for GE dishwashers. This part effectively removes water from the dishwasher after the wash and rinse cycles, ensuring that your dishes are left clean and dry.

Causes of a bad pump drain assembly can include blockages from food particles or debris, wear and tear over time, or damage to the pump’s motor or internal components.  

Symptoms of a bad pump drain assembly include:

• Water not draining from the dishwasher
• Unusual noises during the drain cycle
• Standing water in the bottom of the dishwasher
• The dishwasher cycle not completing properly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Blower Motor Assembly is an OEM part for GE dishwashers. This part is responsible for driving the dishwasher's venting system, which plays a key role in the drying process of your dishes.

Over time, the Blower Motor Assembly may need replacement due to wear and tear, damage, or failure. A malfunctioning blower motor can lead to ineffective drying of dishes, increased cycle times, or the dishwasher failing to complete its drying cycle properly.

Symptoms of a bad Blower Motor Assembly include:

• Dishes remaining damp or wet even after the drying cycle is complete.
• Unusual noises coming from the dishwasher, indicating that the blower motor is struggling to operate.
• The dishwasher stopping or pausing during the drying cycle.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Restore proper draining with this dishwasher drain pump assembly. It evacuates wastewater at the end of each wash and rinse, helping the tub empty fully so cycles finish correctly and standing water and drain errors are avoided. What it does:

• Drives an impeller to push water from the tub through the drain hose to household plumbing
• Activates during drain segments to clear the tub between and after cycles
• Helps resolve symptoms like water left in the bottom, slow or intermittent draining
• Addresses loud humming or grinding from the pump area and drain-related cycle interruptions

• 1 drain pump assembly

• Disconnect power at the breaker and turn off water before servicing
• Access from the lower front or bottom; place a towel or pan to catch residual water
• Label and unplug the wire connector, release the clamp/retainer, and remove the pump; transfer any model-specific seal or bracket if present
• Seat and align the new pump fully to avoid leaks, reconnect hoses/wires, then test for proper draining

The Sump Inlet is an OEM part for GE dishwashers. This part allows water to flow into the sump area, which collects and drains used wash water from the tub during the dishwashing cycle.

Causes of a bad part can range from clogs or obstructions preventing proper water flow, physical damage or cracks leading to leaks, or general wear and tear over time.

Symptoms of a bad Sump Inlet include:

• Failure of the dishwasher to fill with water
• Water leaks or puddling around the base of the dishwasher
• Excessive noise or gurgling sounds during operation

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.