By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
Need Help?
Call
Replace worn, cracked, or faded burner control knobs on your cooktop. Restores clear temperature markings and secure grip for adjusting heat settings.
1) I installed 4 ea new Whirlpool 700855K switches. (The old switches had INF-240P-871 stamped on them. 700855K was the cross-referenced P/N.) The installation was easy. There is slight difference in the terminal arrangement: 1) the old switch has raised terminals whereas the new switch has recessed terminals (for safety), and 2) the terminal markings are slightly different: The old switch has L1/L2/P/H1/H2 (5 terminals). The new switch has L1/L2/P/HC/H1(Also five terminals. I saw where one... Read more
Replace your worn oven door gasket to improve heating efficiency and prevent heat loss. Restores proper seal between door and cavity. Confirm fit by model.
I replaced the old control panel with a new one. I also changed out the door seal to help prevent the control panel from going bad a second time. It was the heat from the oven getting to the keypad on the control panel that caused it to go bad. Read more
Burner head for gas ranges and cooktops. Distributes gas evenly to create a proper flame. Replace if cracked, damaged, or clogged with buildup.
In an attempt to clean the range from the grease-gunk build-up, I had to remove the burner heads. Unfortunately, the 2 most used burner heads had immovable screws that locked them into the orifices underneath. After numerous hours in attempts to salvage the old burner heads and orifices attempting to remove the immovable screws, I gave up. Checked Maytag's website for parts and found nothing. Turned to AppliancePartsPros.com and found the correct parts for reasonable price in a matter of... Read more
This control knob fits onto the burner valve stem on the front panel of the range and is used to adjust the flame or heat level of a surface burner. It has a D-shaped shaft opening that engages with the valve stem for precise control. Replace this knob if it is cracked, melted, or if the shaft opening is worn out, causing the knob to slip and not properly control the burner.
With Appliance Parts Pro's repair videos and helpful telephone sales representatives, I felt confident in replacing by DIY the electronic control panel on our eight year old Jenn Air gas range. The part cost just under $200. I saved over $160! The replacement part arrived in two days and I replaced it in less than two hours. Thank you! Background - Initially, I called a franchise appliance repair service. Technician diagnosed that replacing the control panel ($200) would "likely" solve... Read more
Note: Kit of 2 black grates.
I found this website and was surprised that I could replace drip pans, grates, and knobs. It was at my door the next day after ordering! It took longer to open the box and unwrap the pieces than it did to put the new pieces on. My stovetop looks brand new and I am very happy! Read more
This line fuse protects the appliance's incoming power circuit by opening if an overload or short occurs. Replacing a blown fuse can help restore power once the underlying issue is corrected, preventing further damage to sensitive components.
Tested the High Voltage Capacitor which showing no capacitance and no resistance. Replaced it together with the diode and the line fuse no longer blew and the microwave is back in service. Read more
Burner not heating evenly or taking too long to boil water? This surface heating element restores proper heat output. Moderate DIY repair.
Burner not heating? This surface element restores consistent heat to your cooktop. DIY-friendly repair—most complete it in 20-30 minutes with basic tools.
Easy. Pulled the two screws that hold the top in place. Then lift the top and slide it forward 4 inches. Reach in and disconnect the two wiring harnesses (Squeeze the sides to release). Lift the entire top off and place it upside down on the table. Remove the four screws that hold the metal panel to the top. Flip this panel upside down. From under the panel and release the three clips that hold the element in place. ***YOU NEED TO SAVE THESE CLIPS**** they do not come with the new... Read more
Oven won't heat or bakes unevenly? The lower bake element supplies bottom heat during baking. Straightforward DIY fix—disconnect power, remove screws.
I purchased a new element from Appliance Parts Pros online and received it a short time later. I was able to determine the correct size and element as a result of the picture and graph background. Very Helpful!!! The stove is over thirty years old and so it took some time for my friend to get the old screws out. Otherwise, installation was straightforward. Read more
Fix a burner stuck on high or won't adjust temperature with this infinite switch. Controls cooktop burner heat levels. DIY repair in under 30 minutes.
Replaced the Infinite Switch and that solved the problem. Did not need to replace the Surface Element Read more
This stainless steel control knob fits on the front panel of the range and is used to adjust the flame on a surface burner. It slides onto the gas valve stem and includes printed markings indicating flame settings. Replace this knob if it is broken, discolored, or no longer turns the valve stem smoothly to control the burner.
Pulled the old knob off, pushed the new knob on. Read more
Broil element not heating or glowing? This upper heating element restores high-heat broiling. Common DIY fix, typically installs in under 10 minutes.
I went on line and found several appliance web sites promising to be able to get the parts to fix it. One website actually showed a video of how to fix it. It was a good video which showed everything involved and then easily showed me the parts list of the elements involved and how to fix it. I went further and actually ordered the element at about 1 or 2 AM. Read more
Black control knob kit for cooktop burners. Includes four knobs that fit figure-eight shaped shafts. Replace cracked, worn, or missing knobs to restore control.
Many of the replacement parts for my 23-year old Jenn Aire cook top are showing as "unavailable" on most parts supplier web sites, but I finally found the proper replacement knobs here. They fit perfectly and now the cook-top works as it should and looks practically new again. Now... since I don't need to buy a new cook top, I have some more cash to throw at finding that winning lottery ticket. Read more
This upper oven door hinge is a position-specific hinge that supports and controls a side-swing door's movement, helping it open smoothly and seal firmly. Replacing a worn hinge restores proper alignment, closure, and heat retention.
I REPLACED THE HINGE ASSY ONLY BECAUSE I WAS UNABLE TO PURCHASE THE SPRING ONLY. THIS IS 3rd TIME I REPLACED THE HINGES BECAUSE OF A BROKEN SPRING. IT WOULD BE CHEAPER IF ONLY THE SPRING COULD BE BOUGHT. Read more
Replace a cracked, clogged, or worn burner head on your gas cooktop. This component directs gas through flame ports for even heating and reliable ignition.
I ordered replacement parts to convert the side to individual burners. Read more
This fan motor powers the cooling fan that moves air through your unit. Replacing a worn or noisy motor restores proper airflow to help maintain stable temperatures and reliable performance. What it does:
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.