Kenmore / Sears Refrigerator Control Board

The Control Board is an OEM part for LG refrigerators, serving as the central hub for managing the appliance's various functions and settings. This sophisticated electronic component controls everything from the temperature settings to the defrost cycle, ensuring your refrigerator operates efficiently and maintains the desired coolness for your food and beverages. 

Causes of a bad Control Board can include power surges, electrical shorts, wear and tear over time, or exposure to moisture, which can lead to malfunctions in the refrigerator's operation.

Symptoms of a bad Control Board include:

• The refrigerator not cooling properly
• Irregular or erratic behavior of the refrigerator's display or controls
• The fridge or freezer section becoming too cold or not cold enough
• The ice maker or water dispenser not working correctly

This OEM LG part is also compatible with some Kenmore models.

The Main PCB Assembly is an OEM replacement part for LG refrigerators. As the primary control board, it manages all refrigerator functions and features such as temperature control, frost free operation, and diagnostic fault codes.

Causes of a faulty PCB can involve spilled liquids corroding circuit pathways over time, defects in integrated computer chips, or loose connections susceptible to arcing under continuous power loads.

Symptoms include:

• Non-responsive control panels and displays
• The refrigerator failing to cool or maintain proper temps
• Abnormal sounds from the compressor and fans not engaging

Also compatible with some Kenmore models

The Defrost Timer is an OEM replacement part for GE refrigerators. It regulates the automatic defrost cycle, which helps maintain optimal cooling and preserving food freshness inside the fridge. The defrost timer controls when the refrigerator exits cooling mode to enter a brief defrost period, preventing the buildup of ice on cooling coils. 10hr/35min timer.

Causes of a bad defrost timer can be normal wear and tear over time, exposure to wet environments, or accidental damage.

Symptoms of a bad defrost timer include:

• Inefficient or inconsistent cooling inside the fridge
• Ice accumulation on refrigerator walls or coils
• Condensation or water pooling in compartments or drawers
• Loud buzzing or clicking noises emitting from the back of the fridge

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

The Ice Level Control Board is an OEM part for Whirlpool refrigerators. This board manages the ice maker’s production by monitoring the ice level in the ice bin, ensuring that ice is made when needed and halting production when the bin is full.

Causes of a bad ice level control board can include electrical issues such as power surges, wear and tear over time, or damage from moisture or debris.  

Symptoms of a bad ice level control board include:

• The ice maker not producing ice
• Continuous ice production even when the bin is full
• Error codes related to the ice maker
• Irregular or inconsistent ice production

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Defrost Control Board is an OEM part for Whirlpool refrigerators. This board manages the defrost cycle by controlling the defrost heater and monitoring the freezer's temperature. 

Causes of a bad defrost control board can include electrical issues, wear from continuous use, or damage from power surges.  

Symptoms of a bad defrost control board include:

• Excessive frost buildup in the freezer compartment
• The refrigerator not cooling properly
• The defrost heater not activating
• The refrigerator running continuously without cycling off

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Electronic Control Board is an OEM part for Whirlpool refrigerators. This part manages the refrigerator's functions, including temperature regulation, defrost cycles, and the operation of fans and compressors.  

Causes of a bad electronic control board can include electrical surges, exposure to moisture, or general wear and tear over time.  

Symptoms of a bad electronic control board include:

• Inconsistent or incorrect temperatures
• The refrigerator not cooling or freezing properly
• Error codes or flashing lights on the display
• The refrigerator failing to start or cycling on and off frequently

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Defrost Timer is an OEM replacement part for GE refrigerators. It automatically initiates timed defrost cycles to prevent the buildup of frost or ice within the refrigerator compartment and freezer coils. Regular defrosting maintains optimal temperature regulation and airflow while minimizing mineral deposits long-term.  

Symptoms of a bad defrost timer include:

• Inability to initiate automatic defrost functions
• Accumulation of excessive frost or ice buildup risking freezer damage    
• Temperature control or airflow issues disrupting refrigeration  
• Potential dripping or leaks from defrost water overflow

Causes of failure involve worn-out internal contacts or degraded electronic components from extended exposure to refrigerated conditions. Mineral residue accumulating within the timer mechanism over many years also risks impeding electrical connections.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators. 

The Defrost Control Board is an OEM part for Frigidaire refrigerators. This board manages the defrost cycle by controlling the activation of the defrost heater and the monitoring of the freezer's temperature. 

Over time, the defrost control board can fail due to electrical issues, wear from continuous use, or damage from power surges. 

Symptoms of a bad defrost control board include:

• Excessive frost buildup in the freezer compartment
• The refrigerator not cooling properly
• The defrost heater not activating
• Frequent cycling on and off of the refrigerator

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Adaptive Defrost Control Board

The Electronic Control Board is an OEM replacement part for Frigidaire freezers. It functions to operate all freezer systems and components through electronic programming and input received from sensors. 

Causes of a failed control board can include moisture damage impairing circuitry over time, power surges disrupting electronics, or logic and memory failures.

Symptoms of a problematic control include:

• The freezer failing to cool or freeze properly
• Lights or other features not functioning as expected
• Error codes appearing regarding control faults  
• Sensors and components not responding to control signals

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This refrigerator defrost timer automatically starts and ends the defrost cycle to melt frost from the evaporator coils. Replacing a failed timer restores consistent cooling performance and helps prevent frost buildup that can restrict airflow.

• Controls the timed switch between cooling and defrost to keep evaporator coils clear of frost
• Common symptoms of failure: heavy frost on the evaporator or back panel, fresh food section too warm, unit runs constantly, or won't resume cooling after defrost
• Restores proper frost removal and airflow for stable temperatures
• Designed to match the original timer's function and wiring connections for applicable models

• Disconnect power before servicing; wear cut-resistant gloves
• Access location varies by model—often in the fresh food control housing or rear machine compartment
• Photograph/label wire positions and transfer them to the matching terminals on the new timer
• Reuse original mounting hardware and install in the same orientation as the original

This compressor inverter control board powers and regulates the variable-speed compressor in your refrigerator by converting household AC into the controlled output the compressor needs. Replacing a failed inverter can restore compressor operation and normal cooling performance.

• Receives commands from the main control to vary compressor speed for efficient, steady cooling
• Converts AC line voltage to the controlled output required by the compressor motor
• Common symptoms of failure: refrigerator warm, compressor not running while fans/lights operate
• May also present as intermittent cooling, clicking or humming near the compressor, or visible damage on the module

• Disconnect power before servicing; this is a high-voltage component mounted at the compressor
• Note wire positions and transfer connectors one at a time; ensure all connections are fully seated
• Secure the module to the original mounting to maintain proper heat dissipation and vibration control

This is an electronic control board for refrigerators. It's an internal component that ensures the refrigerator runs correctly at all times. The electronic control board is used to manage temperatures, defrosting times, and other features in the refrigerator. If this part is damaged or worn, it may cause cooling issues, prevent the appliance from working, or cause erratic behavior. In some cases, it will also make a whistling or clicking noise.If the electronic control board is malfunctioning, it will need to be replaced. Tools needed include a Phillips screwdriver, flathead screwdriver, and needle-nose pliers. A pair of work gloves can also be useful to protect the hands. Before starting work with the control board, unplug the refrigerator or turn off the circuit breaker. Locate the control board cover, remove the screws, and take off the cover. Detach the wires and take out the electronic control board. Replace the wires in the appropriate places on the new board and install it into the refrigerator.This is an authentic OEM replacement electronic control board. It's sourced directly from the manufacturer and designed for use with refrigerators by Maytag, Whirlpool, KitchenAid, and Kenmore. This component is sold on an individual basis.

This control board is responsible for controlling the main electronic functions of the refrigerator. It monitors and manages the temperature and cooling settings of the appliance. Models that are compatible with this part can have the temperature adjusted digitally. If a control board is damaged or faulty, the set temperature of the appliance will not match the actual temperature reading the machine is putting out.To install this control board, open the refrigerator door, and make a note of the small white box on the ceiling area of the refrigerator. Remove the four screws holding this box in place. The control board is contained in the box and can be removed by popping the clip. Unplug the old board from the wiring harness and install the new one.This Whirlpool refrigerator control board is a genuine OEM part and is sourced directly from the manufacturer. It is compatible with Whirlpool, Maytag, Kenmore, and Magic Chef appliances.

This main power control board assembly is the refrigerator's central controller. It manages power to the compressor, fans, and defrost system so the unit cools consistently and responds correctly to temperature settings.

• Distributes and regulates power to the compressor, condenser/evaporator fans, and defrost components
• Processes inputs from temperature sensors and the user interface to coordinate cooling cycles
• Common symptoms it may address: not cooling or intermittent cooling, fans/compressor not running, unit won't defrost/ice buildup
• May also help with unresponsive controls or repeated clicking/buzzing from the control area

• Disconnect power before servicing; handle the board by the edges and use ESD protection
• Access location varies by model; typically mounted in a rear control compartment behind an access cover
• Photograph wiring and move connectors one at a time to the new board; ensure all locking tabs are fully seated
• Reinstall covers, restore power, and verify compressor/fans operate and cooling resumes

This is a high-quality refrigerator power supply board. It's an internal component that is made to control the refrigerator functions. This part is made with small precision parts to help with timing defrost and cooling cycles. This part can be damaged or malfunction and stop operating correctly. This may prevent the refrigerator from running, cause strange sounds, or cause the refrigerator to run at the wrong temperature.If this part is damaged, it will need to be replaced. Before replacing the power supply board, make sure the refrigerator is unplugged from the wall. The process will require a flathead screwdriver and a nut driver. Use the tools to unthread the screws on the access cover. Depress the retaining tab to remove the inner cover and disconnect the wires. Press the tab to release the power supply board and snap in the new component. Make sure the wires are properly connected and reassemble.This genuine OEM replacement part is sold on an individual basis. It is directly acquired from the manufacturer and is designed to be compatible with refrigerators made by Kenmore, Whirlpool, Maytag, and KitchenAid.