Kenmore / Sears Washer Gasket & Seal

The Door Boot Seal is an OEM part for Frigidaire washing machines. It creates a watertight seal between the washer tub and the door, preventing water from leaking during the wash cycle.

Causes of a bad door boot seal can include wear and tear over time, mold or mildew buildup, and damage from sharp objects or improper cleaning methods. Exposure to harsh detergents or frequent overloading of the washer can also contribute to the deterioration of the seal.

Symptoms of a bad door boot seal include:

• Water leaking from the washer door
• Visible cracks, tears, or holes in the seal
• Mold or mildew buildup causing unpleasant odors
• Clothes coming out wetter than usual due to water leakage

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Inlet Hose Screen and Gasket is an OEM part for Whirlpool washing machines. This component is designed to filter debris from the water entering the machine and ensure a tight seal between the hose and the water inlet valve. By preventing debris from entering the washing machine, it helps to maintain the appliance's performance and longevity.

Causes of a bad inlet hose screen and gasket can include clogging from mineral deposits or debris, wear and tear over time, or damage due to improper installation or removal. A compromised screen or gasket can lead to reduced water flow and potential leaks.

Symptoms of a bad inlet hose screen and gasket include:

• Reduced water flow into the washing machine
• Visible debris or buildup on the screen
• Water leaks at the hose connection
• The washing machine not filling properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Tub Seal is an OEM part for Whirlpool washing machines. Located between the outer tub and inner basket, it forms a barrier preventing leaks that could damage surrounding components and structures.

Causes of a bad tub seal can be cracks or compression failures due to repetitive impacts and stresses from continual clothes tumbling. Detergents and temperature fluctuations also break down rubber over decades when exposed to laundry environments.

Symptoms of a bad tub seal include: 

• Water leakage noticed around the base of the washer cabinet
• Reduced or inefficient cleaning from leaking wash water 
• Potential water damage risks to floors and home infrastructure

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Upper Transmission Shaft Seal is an OEM replacement part for Whirlpool washing machines. This seal is designed to prevent water from leaking out of the washer tub and into the transmission, ensuring the proper function of the washing machine's internal components.

Causes of a bad upper transmission shaft seal can include wear and tear from regular use, exposure to harsh detergents, or damage from foreign objects. Over time, the seal material can degrade, leading to leaks and reduced efficiency.

Symptoms of a bad upper transmission shaft seal include:

• Water leaking from the bottom of the washing machine
• Unusual noises during the spin cycle
• Transmission oil stains on the floor
• Poor washing performance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Washing Machine Door Boot Seal is designed to provide a reliable and watertight seal for your Samsung washer. This genuine OEM part ensures compatibility with a wide range of Samsung washing machine models, guaranteeing a perfect fit and optimal performance. Crafted from high-quality materials, the door boot seal effectively prevents water leaks during wash cycles, protecting your laundry area from potential water damage. Its flexible design accommodates the constant movement of the washer door, ensuring long-lasting durability and maintaining the efficiency of your appliance. Installing the Washing Machine Door Boot Seal is straightforward, allowing you to restore your washing machineGÇÖs functionality quickly and easily. By choosing this genuine OEM part, you enhance the longevity and reliability of your Samsung washer, ensuring it operates smoothly for years to come. Investing in this door boot seal not only fixes existing issues but also helps maintain the overall performance of your washing machine, providing you with peace of mind and a better laundry experience.

The Door Boot Seal is an OEM part for for 27" LG front load washers. It provides a watertight seal between the washer door and the drum, preventing water from leaking out during the wash and spin cycles. This seal also helps to keep the interior of the washer clean and free from mold and mildew.

The door boot seal can fail due to various reasons such as wear and tear from regular use, exposure to harsh detergents, or physical damage from foreign objects. Mold and mildew buildup can also compromise the integrity of the seal over time.

Symptoms of a bad door boot seal include:

• Water leaking from the front of the washer
• Visible tears, cracks, or deformation in the seal
• Mold or mildew buildup on the seal
• Unpleasant odors coming from the washer

This OEM LG part is also compatible with Sears/Kenmore washing machines.

Note: For the door boot seal without a drain port, use part number 4986ER0004C.

The Lower Tub Seal is an OEM part for LG front-loading washing machines. It is located between the inner and outer tubs, creating a barrier to prevent water from leaking through the space between these two components.

Symptoms of a leaking lower tub seal include:

• Water stains or moisture accumulating on the outer tub surface
• Puddles of water found underneath the machine
• Excess vibration or noise from unbalanced water pressure

Failure can occur from mineral deposits obstructing the sealing surface over time. Cracks or tears in the seal material also compromise its leak-prevention ability.

This OEM LG part can also be used on Kenmore/Sears appliances. 

The Bellows is an OEM replacement part for Frigidaire front-loading washing machines. Also known as the door boot or gasket, the bellows forms a seal around the washer door during cycles. It prevents water leaks that could damage components.

Causes of a bad bellows can include cracks or punctures resulting from years of opening and closing the washing machine door during regular laundry loads. Mineral buildup may also degrade flexibility over time.

Symptoms of a bad bellows include:

• Water leaks visible around the washing machine door
• Puddles or water marks found inside or below the unit
• Unusual noises or vibrations accompany leaking

This Frigidaire replacement is compatible with some Electrolux, Gibson, and Kenmore front load models as well.

The Outer Tub Seal is an OEM part for LG washing machines. It provides a watertight seal between the outer tub and the tub cover, preventing water from leaking during the wash and spin cycles.

Causes of a bad outer tub seal can include wear and tear over time, exposure to harsh detergents, or damage from foreign objects that may enter the tub during washing. A compromised seal can lead to water leakage, which can cause further damage to the washing machine and the surrounding area.

Symptoms of a bad outer tub seal include:

• Water leaking from the bottom of the washing machine
• Mold or mildew growth around the seal
• Excessive moisture in the area surrounding the washer
• Unusual noises during the wash or spin cycles

This OEM LG part is also compatible with Sears/Kenmore.

The Cover Seal is an OEM part for Whirlpool washing machines. This seal ensures a tight fit between the washer's cover and the tub, preventing water from leaking during the wash cycle. It helps maintain the efficiency and cleanliness of the washing process by keeping water contained within the tub.

Common causes of a bad seal include wear and tear over time, exposure to harsh detergents, or physical damage from regular use.

Symptoms of a bad cover seal include:

• Water leaking from the washer
• Excess moisture around the washer
• Visible cracks or deformities in the seal
• Reduced washing efficiency

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Gearcase Oil Seal is an OEM part for Whirlpool washing machines. This seal is located in the gearcase, preventing oil from leaking out while ensuring the internal components are properly lubricated. The kit contains two plastic seals that slide over the shaft to create a tight oil barrier.

Causes of a bad oil seal can include wear and tear over time, exposure to high friction and heat, or accidental damage during maintenance. A faulty oil seal can lead to oil leaks, which may cause further damage to the gearcase and other components.

Symptoms of a bad gearcase oil seal include:

• Oil leaks underneath the washer
• Loud noises during operation
• Washer not spinning or agitating properly
• Visible wear or damage to the seal

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Vent Hose is an OEM part for LG washing machines. This hose is essential for ensuring proper ventilation within the washer, allowing air to circulate and preventing the buildup of moisture and mildew. It helps maintain the efficiency of the washing machine by facilitating the expulsion of air and excess water vapor during operation.

Causes of a bad washer vent hose can include wear and tear over time, blockages from lint or debris, or damage due to bending or pinching.

Symptoms of a bad vent hose include:

• Excessive moisture or condensation inside the washer
• Musty odors from the washing machine
• Visible cracks or holes in the hose
• Poor ventilation leading to inefficient washing cycles

This OEM LG part is also compatible with Sears/Kenmore.

The Outer Tub Ring Seal is an OEM part for Whirlpool washing machines. This seal is essential for maintaining a watertight connection between the outer tub and the tub ring, preventing water from leaking during the wash and spin cycles.

Causes of a bad tub ring seal can include regular wear and tear over time, exposure to harsh detergents or chemicals, or damage from foreign objects during the washing process.

Symptoms of a bad outer tub ring seal include:

• Water leaking from the washing machine during operation
• Visible cracks or tears in the seal
• Excessive moisture or water damage around the washing machine
• Mold or mildew buildup due to persistent leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Seal is an OEM part for Whirlpool washing machines. This part provides a tight seal around the washer shaft, preventing water from leaking out of the tub during the wash cycle.

Causes of a bad shaft seal can include wear and tear over time, exposure to harsh detergents or cleaning agents, or damage from foreign objects that may have gotten into the washer. 

Symptoms of a bad shaft seal include:

• Water leaking from the bottom of the washing machine
• Excessive noise during operation
• Visible damage or wear on the seal
• Wet spots or puddles under the washer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Gasket is an OEM replacement part for LG washing machines. Positioned around the washer's door, this gasket ensures a watertight seal, preventing water from leaking out during wash cycles. 

Symptoms of a bad gasket can include:

• Puddles or drips of water collecting under or around the washer  
• Moisture inside areas that should remain dry, like the control panel
• The washer fails to fully drain or fill with water efficiently

Causes of a bad gasket can include cracks, breaks, or degradation developing from repeated flexing during filling/draining cycles and exposure to detergents over time.

This genuine LG OEM gasket is also compatible with some Kenmore models.

The Front Bellow Tub Seal is an OEM replacement part for Whirlpool washing machines. Located behind the washer door opening, it forms a barrier sealing in moisture. The flexible seal compresses tightly against the tub during rotation to prevent water escape through potential seam gaps. 

Causes relate to years of compression from tub movement stressing the material. Mineral buildup prohibiting a flush seal also diminishes its functionality over time.

Symptoms of failure include:

• Water puddling outside the washer around the opening
• Mineral deposits accumulating hints at compromised sealing
• Leakage necessitates replacing the seal to regain integrity

Main seal between the front bulkhead and the outer tub for Whirlpool-made front load washers (Whirlpool, Kenmore Elite, KitchenAid). Clamps are not included. If clamps are needed, order WP8182210 and W10902779.

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.