Kitchenaid Dishwasher Parts

The electric control board is an OEM component for Whirlpool dishwashers. It functions as the main control board, managing all electrical operations including cycles, temperatures, valves, motors, and sensors. 

Causes of a bad control board can include failures in the circuitry, damage due to power surges, or moisture intrusion over time.

Symptoms include: 

• The dishwasher not starting or stopping cycles properly  
• Inability to turn on or errors appearing on the display
• Improper temperatures during cycles 
• Strange sounds coming from the control area

This Whirlpool OEM part is designed to directly replace the original equipment. This control board is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers.

The Dishwasher Adapter is an OEM part for Whirlpool dishwashers. It serves as a connector, allowing various components of the dishwasher to interface correctly and ensuring proper water flow and pressure throughout the appliance.

Cracks, wear, or damage to the adapter can cause significant issues with the dishwasher's performance.

Symptoms of a bad Dishwasher Adapter include:

• Leaks under or around the dishwasher
• Poor water pressure during cycles
• The dishwasher failing to fill or drain correctly
• Visible cracks or damage to the adapter

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Right Hand Dishrack Support is an OEM replacement part for Whirlpool dishwashers. Located on the right interior side wall of the dishwasher tub, this support stabilizes the upper dishrack during the wash cycle. It features an angled plastic slab with ribs for secure placement of the dishrack tabs. 

Causes of a bad dishrack support can include cracks or breaks in the plastic from repeated impact of dishes against it over time, or cracks allowing moisture to enter and cause warping.

Symptoms of a bad dishrack support include:

• Squeaking or rattling sounds from the right side of the dishrack
• Loose or unstable fit of the upper dishrack  
• Dishes or utensils falling from the rack during spinning
• Visible cracks, breaks, or deformations in the plastic support

This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, and some Kenmore and Maytag models.

The Dishwasher Door Spring is an OEM replacement part for Whirlpool dishwashers. It helps with smooth opening and closing by providing a well-balanced counterforce. 

Causes can involve coils weakening from repeated engagements over time. Metal fatigue diminishes recoil capabilities as well reducing assistive power.

Symptoms of a problematic spring include:

• Sagging or loosely fitting doors
• Difficulty fully opening or closing door
• Noises occurring from unbalanced movement

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore dishwashers.

Dishwasher door balance spring. Also check the door balance link kit 8194001.

The Top Dishrack Tube Hanger is an OEM part for Whirlpool and KitchenAid dishwashers. Located inside the tub wall, this component holds the movable upper dishrack in place during operation. By guiding the rack up and down, the hanger plays an important role in proper dish spraying and drying. 

Symptoms of a faulty hanger include:

• Upper dishrack not moving up/down as intended or getting stuck
• Noisy squeaking or grinding sounds from the rack mechanisms  

Causes can be cracks or breaks in plastic components from repeated impact and stress over time. Mineral buildup or food debris accumulation can also cause functional issues.

This genuine replacement OEM part is also compatible with Maytag, Jenn-Air, Amana, Magic Chef, and select Kenmore-branded dishwashers.

The Upper Dishrack Wheel is an OEM part for Whirlpool dishwashers. Designed to ensure the smooth gliding of the upper dishrack in and out of the dishwasher, this wheel plays a crucial role in the functionality and convenience of your appliance.

Over time, the wheels can wear out or become damaged due to regular use, leading to issues with the dishrack's movement.

Symptoms of a bad Upper Dishrack Wheel include:

• Difficulty in sliding the dishrack in or out
• The dishrack becoming stuck or dislodged
• Unusual noises when moving the dishrack
• Visible wear or damage to the wheel itself

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Check Valve Assembly is an OEM replacement part for Whirlpool dishwashers. It is a component that regulates water flow and pressure, allowing water to enter the dishwasher during designated cycles but preventing backflow. The check valve plays an important role in the overall water distribution system of the dishwasher. 

Causes of a bad check valve can include mineral buildup blocking the valve ports over time, damage to the valve mechanism or seals, or decreased valve integrity from wear and repeated use. 

Symptoms of a bad check valve include:

• Leaks or water not properly entering the dishwasher 
• Incomplete or inefficient washing and rinsing cycles
• Strange sounds coming from the water inlet area
• Higher water usage due to faulty draining 

Note: O-ring included.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Control Plate Spring is an OEM part for Whirlpool stand mixers. This spring maintains the proper tension and alignment of the control plate, ensuring the smooth operation and accurate adjustment of the mixer speeds.

Causes of a bad control plate spring can include wear and tear over time, stretching from continuous use, or damage due to overloading the mixer.

Symptoms of a bad control plate spring include:

• Difficulty in adjusting mixer speeds
• Mixer speeds not responding accurately to control adjustments
• Loose or unresponsive control lever
• Unusual noises during speed changes

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Hinge Brace is an OEM replacement part for Whirlpool dishwashers. It serves as a supportive bracket anchoring the dishwasher door hinge assembly firmly in place.Note: This part may be different from your original. If your original part was a flat plastic vapor barrier, the new design is a wire. It is a factory design change, the old design is no longer available.

Over time, the hinge brace can degrade due to constant use, heavy loads on the door, or accidental impacts. A faulty hinge brace can result in misalignment or difficulty in operating the dishwasher door.

Symptoms of a bad hinge brace include:

• Loose or unstable door that does not close securely
• Gaps appearing around the door seal during wash cycles
• Broken hinge components from added stress and tension on the door
• Difficulty fully opening or closing the dishwasher door

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

This shaft-and-pinion assembly uses a 10-tooth pinion to transfer drive through the geartrain. Replacing a worn or stripped unit restores proper gear mesh and smooth, reliable power to the driven components.

• Transfers motor rotation through the geartrain via a 10-tooth pinion on a precision shaft
• Maintains correct gear engagement and alignment to minimize noise and wear
• Typical symptoms: grinding/clicking from the gearcase, output not turning or slipping under load, intermittent drive, or visibly rounded/broken teeth
• Can also reduce wobble or excessive play at the driven shaft

• Disconnect power before servicing; wear cut-resistant gloves and eye protection
• Access the drive/gearcase, note gear order and orientation (take photos for reference)
• Inspect mating gears and bushings; clean debris and replace any worn parts
• Apply manufacturer-specified grease to the gear teeth/bearings and confirm smooth rotation by hand before reassembly

Restore smooth, consistent motor operation with this 120V electronic speed control board. It regulates power to the motor so selected speeds engage properly and stay steady, helping your appliance run reliably across all settings. What it does:

• Regulates power to the motor for accurate speed selection
• Helps maintain steady RPM under load
• Common symptoms: runs only one speed, won't change speeds, surges or pulses
• Resolves intermittent operation when the motor has power but won't run

• 1 speed control board assembly

• Disconnect power before servicing; work in a dry area
• Handle the board by the edges to avoid static damage
• Move wires from the old board to the new one one-by-one; take reference photos
• Some models require speed calibration after installation—follow the service instructions

Shaft seal included.

The Control Board is an OEM replacement part for Whirlpool dishwashers. As the "brain" of the appliance, it monitors and directs all functions of the dishwasher through integrated electronic components and circuitry. 

Causes of a bad control board can include damage from power surges, liquid spills inside the unit, or simply normal wear over many cycles of use. Electronic failures within the board's circuitry are also possible causes.

Symptoms of a bad control board include:

• The dishwasher fails to turn on or start cycles
• Lights, displays, or cycles activating unexpectedly  
• Inability to scroll through menu options on the display
• Cycles not completing or repeating portion of cycles
• Error codes appearing frequently on the display

The board is also compatible with machines from brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

Color: gray. Measures about 3 inches high by 2-1/2 inches deep.

The Toaster Lever is an OEM replacement part for Whirlpool brand toasters. This lever allows for control of the toast lowering function. It measures about 1 inch wide by 1/2 an inch high by 1-1/2 inches deep.

Causes of a bad lever include wear and tear over thousands of use cycles, stress fractures from overly forceful movement, or damage at the pivot point inhibiting smooth motion.

Symptoms of a bad lever include:

• Difficulty lowering or lifting bread fully
• Requires two hands or excessive force for operation
• Loose, wobbly feel when engaging the lever
• Broken or missing edge guards exposing sharp surfaces

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Color: gray. Measures about 3 inches high by 2-1/2 inches deep.