Lg Ice Bin, Bucket, Or Tray

This assembly stores ice and delivers it from the ice maker to the dispenser. Replace it when the bin is cracked, warped, or its drive components are damaged, causing weak dispensing, jams, or being stuck on one ice type.

• Stores ice and interfaces with the dispenser system to deliver cubes or crushed ice
• Resolves no or weak ice dispensing
• Corrects grinding/clicking noises or auger jamming from a damaged bin
• Addresses visible cracks, broken tabs, or a bucket that won't seat securely

• Disconnect power to the refrigerator before servicing
• Open the door and pull the old bucket straight out; depress any release tab if equipped
• Align and seat the new assembly fully so the drive coupling engages—do not force it
• Restore power and test the dispenser (cube and crush selections)

The Ice Cube Tray is an OEM part for LG refrigerators. It is located in the freezer section of the refrigerator and provides a designated space for freezing water into ice cubes. It is designed with individual compartments to form ice cubes in a specific shape and size.

Causes of a faulty ice cube tray can include regular wear and tear, physical damage, or improper handling. These factors can result in issues such as the tray cracking or breaking, difficulty in removing ice cubes, or improper freezing of the cubes.

Symptoms of a bad ice cube tray may include:

• Cracked or broken tray
• Difficulty in removing ice cubes from the tray
• Irregularly shaped or improperly frozen ice cubes

This OEM LG part can also be used on Kenmore/Sears appliances. 

This ice bucket assembly stores and delivers ice to the dispenser. Replacing a damaged bucket restores smooth, reliable dispensing and helps prevent jams when the original container is cracked, worn, or no longer engaging the drive.

• Stores finished ice beneath the icemaker and positions it for dispensing
• Interfaces with the dispenser drive to move ice into the chute when activated
• Helps maintain proper alignment for consistent cube delivery
• Common symptoms: cracked or broken container/tabs, ice won't dispense or jams, grinding/skipping during dispense

• Disconnect power to the refrigerator before servicing
• Remove the old bucket; empty ice and note the drive coupler orientation
• Seat the new assembly fully so the drive engages; transfer any reusable covers from the original if needed
• Restore power and test ice dispensing

This ice bucket holds and stores ice produced by the refrigerator's icemaker, keeping cubes contained and easy to access. It replaces a cracked, damaged or missing bucket so ice can be collected without spilling into the freezer. What it does:

• Collects and stores ice produced by the icemaker until you remove or dispense it
• Keeps ice contained to prevent loose cubes from scattering in the freezer
• Restores proper seating for the ice delivery area to reduce jams or blockages
• Useful when the original bucket is cracked, warped, or missing

• One ice bucket

• Unplug the refrigerator or switch the icemaker to OFF before replacing the bucket
• Remove all loose ice and the old bucket before installing the new one
• Slide the new bucket into place until it seats securely; do not force
• Rinse the new bucket with clean water before first use

This replacement ice bucket stores ice from the icemaker and engages the dispenser drive for smooth dispensing. Swap a cracked or warped bin to prevent leaks, jams, and inconsistent ice dispensing performance. What it does:

• Holds ice produced by the icemaker inside the freezer
• Interfaces with the dispenser drive to move ice toward the chute
• Keeps cubes contained to reduce spills and jams
• Common symptoms: cracked bin, ice not dispensing, bucket won't seat properly, clumping or leaking ice

• 1 ice bucket

• Disconnect power to the refrigerator before servicing
• Empty the old bucket and pull it straight out; avoid forcing the auger/drive area
• Align and seat the new bucket so the rear hub fully engages the drive coupler
• Restore power and test ice dispensing; the bucket is fully latched and stable

Replacement ice bucket that collects and stores ice produced by the refrigerator ice maker, keeping ice contained and ready for dispensing. Molded plastic construction provides a clean catch area and helps reduce spills and freezer mess. What it does:

• Holds and stores ice produced by the ice maker so cubes are contained and accessible.
• Guides ice toward the dispenser/auger area to help ensure smooth delivery when seated correctly.
• Replaces cracked, broken or missing buckets that can cause leaks, spills or misalignment.
• Helps reduce loose ice and freezer clutter that can lead to ice jams or dispenser issues.

• Disconnect power to the refrigerator before removing or installing the ice bucket.
• Empty remaining ice and allow any frost to melt before installation to avoid blockages.
• Ensure the bucket is fully seated and aligned with the ice maker/dispenser so ice flows correctly.

Replacement ice bucket assembly that stores and feeds ice produced by the refrigerator's ice maker. Restores proper ice collection and delivery, helping prevent spills, jams, and interrupted dispensing so the ice system works reliably. What it does:

• Collects and holds ice produced by the ice maker so cubes are available for dispensing or storage.
• Guides ice toward the dispenser/auger area to help ensure smooth dispensing and reduce jams.
• Replaces cracked, warped or damaged buckets that can cause ice to spill or not stack properly.
• Works with the ice maker assembly to support proper ice ejection and storage.

• Disconnect power to the refrigerator before removing or installing the bucket to avoid injury or damage.
• Handle the plastic bucket carefully to avoid cracking; inspect for broken tabs or mounting ears before installing.
• Align the bucket with the ice maker tracks/slots and slide or snap into place per the manufacturer's instructions.

This replacement ice bucket (ice bin) stores ice from the icemaker and positions it for dispensing. A new, intact bucket helps restore smooth ice delivery and proper bin alignment to reduce jams, spills, and inconsistent dispensing.

• Holds and contains ice in the freezer or in-door ice compartment
• Interfaces with the dispenser/auger system to feed cubes to the chute
• Maintains correct seating and alignment for reliable dispensing
• Replace if cracked, warped, or not locking in place; symptoms include ice not dispensing, frequent jams, or a loose/misaligned bin

• Unplug the refrigerator or switch off power before servicing
• Remove the old bucket, empty remaining ice, and clear frost/debris from the compartment
• Align the new bucket with the tracks/drive and slide it in until fully seated
• Restore power and test dispensing with a small amount of ice

The Ice Bucket Assembly is an OEM part for LG refrigerators. It is designed to collect and store ice produced by the icemaker, ensuring a convenient and organized storage solution within the freezer.

Causes of a bad ice bucket assembly can include damage from frequent handling, cracks or breaks due to impact, or issues with the internal components such as the auger or motor. Over time, these issues can impair the functionality of the ice bucket, leading to inefficient ice storage or dispensing problems.

Symptoms of a bad ice bucket assembly include:

• Cracks or visible damage to the bucket
• Ice not dispensing properly
• The bucket not fitting securely in place
• Excessive noise during ice dispensing

This OEM LG part is also compatible with Sears/Kenmore.

This ice bank assembly is the refrigerated bin that stores and helps feed ice from the ice maker to the dispenser, keeping ice contained and ready for use. It restores proper ice collection and flow inside the freezer. What it does:

• Holds and guides ice from the ice maker to the dispenser or access area
• Prevents ice from clogging or falling out of the ice maker area
• Replaces cracked, warped, or damaged ice storage that causes leaks or poor dispensing
• Helps restore normal ice delivery when the ice maker produces ice but it doesn't collect or feed properly

• One ice bank assembly

• Disconnect power to the refrigerator before beginning service
• Work in a dry, well-lit area; remove contents and shelves as needed for access
• Handle edges and the ice bin carefully to avoid damage; wear gloves for grip and protection
• Follow OEM service instructions for removal and reassembly

This Ice Bucket Cover keeps ice protected and helps guide ice into the dispenser area, reducing spills and contamination. It installs on the refrigerator's ice bucket to maintain clean, contained ice storage and proper dispenser operation. What it does:

• Covers and protects stored ice from contaminants and odors
• Guides ice toward the dispenser chute for consistent delivery
• Helps prevent ice from spilling when removing the bucket
• Restores the original fit and function when the previous cover is damaged or cracked

• One ice bucket cover

• Typically snaps into place on the top of the ice bucket; handle gently to avoid cracking
• Remove the ice bucket and clear any ice before installing the cover
• No special tools usually required; follow safety precautions—disconnect power to the appliance if you must reach into the ice maker assembly