Lg Ice Maker & Related

NOTE: For 3 wire connectors, see part number AEQ73110203

The 14 Cube Ice Maker is an OEM part for LG refrigerators. This ice maker is responsible for automatically producing batches of cube ice on demand to keep extra ice readily available in the freezer. 

Causes of a bad ice maker can include failures from usage over time, clogged lines preventing proper water flow, or impaired mechanical components. 

Symptoms of a bad ice maker include:

• Reduced or no ice production at all  
• Water buildup or overflowing due to malfunctioning fill valves
• Grinding or crunching noises from impaired mechanical parts
• Error codes or fault messages for ice production issues

This OEM LG replacement is also compatible with Sears/Kenmore refrigerator models.

The Icemaker Assembly is an OEM part for LG refrigerators. This assembly is responsible for producing ice and dispensing it into the ice bucket within the freezer compartment. It includes the ice mold, motor, and other components that work together to form, freeze, and release ice cubes efficiently.

You should replace this icemaker assembly if it becomes defective. Common causes of a bad icemaker assembly include wear and tear over time, electrical failures, or blockages in the water supply line. Mineral buildup or malfunctioning components can also hinder the ice-making process.

Symptoms of a bad icemaker assembly include:

• No ice production
• Smaller than usual or misshapen ice cubes
• Leaks or water pooling in the freezer
• Unusual noises coming from the icemaker area

This OEM LG part is also compatible with Sears/Kenmore.

NOTE: The small wire connector features three wires for easy setup. If your original ice maker has 6 wires then order part number AEQ73110205.

The Ice Maker Assembly Kit is an OEM replacement part for LG French door refrigerators. As a comprehensive repair solution, it includes the ice maker, drive motor, assembly, and all necessary mounting hardware. 

Symptoms of a bad ice maker assembly include:

• Inability to produce cube ice automatically  
• Grinding noise coming from the ice maker area
• Ice not dispensing when the oven is engaged
• Error codes or malfunctions shown on the display

Causes relate to high demand on icemaker parts like mold heating elements or drive motors which cycle 100 times per day. Constant use exceeding 10 years contributes to breakdown in precise fit and function of components.

The Ice Maker Assembly is an OEM part for LG refrigerators. This assembly is a key component in the refrigerator's ability to produce ice efficiently and reliably. 

Causes of damage to the Ice Maker Assembly often involve wear and tear from normal use, water supply issues like hard water causing scale buildup in the mechanism, or electrical failures that affect the assembly's control components.

Symptoms of a bad Ice Maker Assembly include:

• Failure to produce ice, indicating that the assembly may not be receiving water, freezing the water properly, or ejecting ice.
• Ice production is significantly slower than usual, or the ice cubes are smaller than normal
• Strange noises during ice-making cycles, such as clicking or whirring sounds

This OEM LG part is also compatible with some Kenmore models.

The Ice Maker Assembly Kit is an OEM part for LG refrigerators. It is responsible for producing and storing ice within the freezer compartment. The kit includes all necessary components to create ice, ensuring a steady supply for household needs. 

Over time, the ice maker can become faulty due to various reasons. Causes of a bad ice maker assembly can include mineral build-up from hard water, wear and tear of moving parts, or electrical component failures. These issues can impair the ice maker's functionality, leading to inconsistent or no ice production.

Symptoms of a bad ice maker assembly include:

• The ice maker not producing ice
• Leaking water around the ice maker
• Ice cubes that are misshapen or smaller than usual
• Unusual noises coming from the ice maker

This OEM LG part is also compatible with Sears/Kenmore.

The Ice Maker Assembly is an OEM replacement part for LG refrigerators. It automatically produces and dispenses batches of ice through the ice bucket and into the storage bin. Proper ice production is crucial for cold beverages and food preservation.

Causes of a bad ice maker assembly can be failures in the electronic control board, freezing components or water supply system. Regular filter changes help prevent excess mineral buildup.

Symptoms of a bad ice maker assembly include:

• No ice production or inconsistent amounts
• Ice cubes that are malformed, fused together or absorbed cold liquid
• Leaking or flooding from the ice maker area
• Error codes shown on the refrigerator display

This genuine LG OEM replacement part is also compatible with some Kenmore models. 

The Ice Maker (12 cube) is an OEM part for LG refrigerators. It is responsible for producing ice cubes, typically in batches of 12, and dispensing them into the ice bin for easy access. This ice maker ensures a consistent supply of ice, ideal for everyday use and entertaining guests.

Over time, the ice maker can become faulty due to regular wear and tear, mineral buildup from water, or issues with the internal components such as the motor or the water inlet valve. A malfunctioning ice maker can lead to inefficient ice production or no ice at all.

Symptoms of a bad ice maker include:

• The ice maker not producing ice
• Smaller than usual or misshapen ice cubes
• Leaks or water overflow in the ice maker compartment
• Unusual noises during the ice-making process

This OEM LG part is also compatible with Sears/Kenmore models.

The Ice Maker Assembly Kit is an OEM part for LG refrigerators. This kit includes all the components necessary to produce ice efficiently, ensuring a steady supply of ice cubes for your household needs. This particular 12-cube ice maker assembly features a 10-wire harness. 

Causes of a bad ice maker assembly can include wear and tear over time, issues with the water supply, or mechanical malfunctions that prevent the ice maker from operating correctly. These issues can lead to a reduction in ice production or complete failure of the ice maker.

Symptoms of a bad ice maker assembly include:

• No ice production
• Ice cubes being smaller than usual
• Leaks around the ice maker area
• Unusual noises during the ice-making process

This OEM LG part is also compatible with Sears/Kenmore.

This assembly stores ice and delivers it from the ice maker to the dispenser. Replace it when the bin is cracked, warped, or its drive components are damaged, causing weak dispensing, jams, or being stuck on one ice type.

• Stores ice and interfaces with the dispenser system to deliver cubes or crushed ice
• Resolves no or weak ice dispensing
• Corrects grinding/clicking noises or auger jamming from a damaged bin
• Addresses visible cracks, broken tabs, or a bucket that won't seat securely

• Disconnect power to the refrigerator before servicing
• Open the door and pull the old bucket straight out; depress any release tab if equipped
• Align and seat the new assembly fully so the drive coupling engages—do not force it
• Restore power and test the dispenser (cube and crush selections)

The Ice Maker and Auger Motor Assembly is an OEM part for LG refrigerators. This assembly is responsible for both producing ice and dispensing it from the ice maker. The ice maker produces ice cubes, while the auger motor drives the auger to move ice from the ice bin to the dispenser chute, ensuring a steady flow of ice whenever needed.

Causes of a bad assembly can include electrical issues, wear and tear from regular use, or damage to the motor or ice-making components. A malfunctioning assembly can lead to inconsistent ice production and dispensing problems.

Symptoms of a bad ice maker and auger motor assembly include:

• No ice production or insufficient ice
• The auger not dispensing ice properly
• Unusual noises from the ice maker area
• Ice jams or clumps in the ice bin

This OEM LG part is also compatible with Sears/Kenmore models.

The Ice Maker Assembly Kit is an OEM replacement part for LG refrigerators. This kit includes the ice maker assembly and installation mounting hardware. For the ice maker to function correctly, it is important to set the temperature of the freezer within the range of 0 to 5 degrees Fahrenheit (-18 to -15 degrees Celsius).

Over time, the ice maker can wear out or malfunction due to continuous use, mineral buildup from hard water, or electrical issues. These problems can hinder its ability to produce and dispense ice efficiently.

Symptoms of a bad ice maker assembly include:

• Ice maker not producing ice
• Ice cubes jamming or backing up inside the maker
• Leaks or wetness under the refrigerator
• Ice dispenser not functioning properly

This OEM LG replacement is also compatible with Sears/Kenmore refrigerators.

The Ice Maker Assembly Kit is an OEM part for LG refrigerators, designed to replace or upgrade the ice-making capabilities of your appliance. This assembly kit includes all necessary components for ice production, ensuring your refrigerator can generate ice efficiently and reliably.

Causes of issues with the ice maker assembly often stem from water line problems, such as clogs or freezing, or mechanical failures within the ice maker itself, including faulty electrical connections or worn-out mechanical components.

Symptoms of a failing ice maker assembly can include:

• Inability to produce ice
• Producing smaller or malformed ice cubes
• Ice maker making unusual noises during operation
• Leaks around the ice maker area

This OEM LG part is also compatible with some Kenmore models.

The Ice Maker Assembly is an OEM component specifically designed for LG refrigerators. It is responsible for automatically producing batches of ice cubes through an electrical freezing process.

Causes of a bad ice maker assembly can include failures in the electrical components, freezing properties deteriorating over time, or physical damage to the assembly housing. 

Symptoms of a bad ice maker assembly include:

• No ice production or very slow icemaking  
• Cubes that are improperly formed or jammed inside the unit
• Error codes displayed related to the icemaker
• Leaking or water issues around the assembly area

This LG part is also compatible with Sears/Kenmore models utilizing the same refrigerator chassis and components.

This ice maker assembly replaces a failed refrigerator ice maker to restore automatic ice production and reliable cube harvesting. Use it to address lack of ice or irregular ice cycling so your appliance makes ice again. What it does:

• Freezes and cycles water into ice, then harvests cubes into the ice bin.
• Common replacement for no ice production, reduced output, or an ice maker that won't cycle.
• Helps isolate ice-maker failures from water-supply or valve issues when diagnosing ice problems.

• Always disconnect power and shut off the water supply before beginning service.
• Some installs require removing shelves, drawers or interior panels.
• Basic hand tools are typically all that's needed; handle electrical connectors and the fill tube carefully.
• If issues continue after replacement, verify water supply pressure and the water inlet valve.

The Ice Maker Assembly is an OEM part for LG refrigerators. This part produces ice within the freezer, ensuring a consistent supply for your needs. 

Causes of a bad ice maker assembly can include electrical issues, mechanical wear and tear, or blockages in the water supply. 

Symptoms of a bad ice maker assembly include:

• No ice production
• Reduced ice output
• Leaking water within the freezer
• Ice cubes not being ejected properly
• Unusual noises coming from the ice maker

This OEM LG part is also compatible with some Kenmore models.

The Ice Cube Tray is an OEM part for LG refrigerators. It is located in the freezer section of the refrigerator and provides a designated space for freezing water into ice cubes. It is designed with individual compartments to form ice cubes in a specific shape and size.

Causes of a faulty ice cube tray can include regular wear and tear, physical damage, or improper handling. These factors can result in issues such as the tray cracking or breaking, difficulty in removing ice cubes, or improper freezing of the cubes.

Symptoms of a bad ice cube tray may include:

• Cracked or broken tray
• Difficulty in removing ice cubes from the tray
• Irregularly shaped or improperly frozen ice cubes

This OEM LG part can also be used on Kenmore/Sears appliances.