Maytag Parts

This refrigerator water filter housing assembly secures and seals the filter while routing water to the dispenser and ice maker. Replacing a cracked or worn housing helps stop leaks and restores consistent water flow through the system.

• Holds the water filter and maintains watertight seals at the connections
• Directs water through the filter to the dispenser and ice maker
• Addresses leaks around the filter area
• Improves weak or no dispenser/ice maker water flow when the housing is damaged

• Disconnect power and shut off the household water supply before servicing
• Dispense water to relieve pressure; place a towel to catch residual water
• Note tubing orientation, release the fittings, and swap the housing
• Restore water and power, check for leaks, and run water to purge air from the system

The Pump Filter is an OEM part for Whirlpool dishwashers. This filter traps debris and prevents it from entering the pump, thereby protecting the pump and ensuring the efficient operation of the dishwasher.

Causes of a bad pump filter can include clogging due to food particles and debris, wear and tear over time, or physical damage from sharp objects or improper cleaning.

Symptoms of a bad pump filter include:

• Poor drainage or standing water in the dishwasher
• Unusual noises during the wash cycle
• Reduced cleaning performance
• Frequent clogging or blockages

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Water Filter Housing is an OEM part for Whirlpool refrigerators. It houses the water filter which helps improve taste and protects connected water lines and ice maker components.

Causes can include cracks or damage from falls/impacts, deterioration of seals and gaskets over time, or blockages in the internal filter cavity.

Symptoms of a bad filter housing include:

• Leaks or water spills around the filter area
• Inability to easily change out the water filter cartridge
• Cracks or issues with the housing door/latch mechanism
• Mineral or sediment buildup that impacts filter performance

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Filter is an OEM part for Whirlpool ranges. Installed at the base of the downdraft vent opening, this filter works to capture grease, smoke and odor particles emitted during cooking.

Causes of a bad filter can include natural saturation over many uses as it accumulates grease residue. Extremely high-heat or splattering cooking methods may also accelerate the clogging process.

Symptoms of an inefficient range downdraft filter include:

• Grease residue visible below the vent opening or on surrounding cabinetry
• Reduced effectiveness at extracting smoke, odors or steam from cooking surfaces
• Vent motor or fan starting to strain or make louder noises during use

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: chrome. Size: 7 5/8 x 5 inch. For charcoal grease filter use 4359331.

This dryer lint filter, also called a lint screen, captures lint and debris from the exhaust air stream. Replacing a damaged or missing screen helps restore proper airflow, improve drying consistency, and protect the blower and vent.

• Traps lint and fibers from tumbling laundry to keep them out of the blower and vent
• Helps maintain proper airflow for consistent drying performance
• Aids in preventing lint buildup inside the dryer and exhaust duct
• Typical failure symptoms: torn mesh, cracked/warped frame, lint on clothes, longer dry times

• Disconnect power; for gas dryers, turn off gas supply
• Remove the old filter and vacuum lint from the housing/duct opening
• Insert the new filter fully in the correct orientation; never operate the dryer without the filter installed
• Run a brief test cycle to ensure proper fit and airflow

This adapter tube assembly connects sections of the appliance's water line to create a secure, leak-resistant path for water flow. Replace it if the tube is cracked or the connection no longer seals properly to prevent leaks and restore flow.

• Connects water tubing between components within the appliance's water system
• Helps maintain a tight, leak-resistant seal at the joint
• Restores proper water flow when a tube or connector is damaged
• Typical symptoms: water leaking at the connection, reduced or no water flow, visible cracks/kinks, loose fit

• Disconnect power and shut off the water supply before servicing
• Relieve line pressure and place a towel or pan to catch any residual water
• Note routing and orientation before removal to ensure correct reassembly
• After installation, restore water and check all connections for leaks

Microwave venthood grease filter. Color: silver. Measures about 5 inches wide by 7-1/2 inches deep.

This replacement grease filter captures airborne grease and cooking residue in your appliance's venting system, helping protect the blower and ductwork while maintaining effective ventilation and airflow.

• Traps grease and food particles carried by the exhaust airstream
• Helps sustain proper airflow and reduce smoke and lingering odors
• Replace if mesh is torn, warped, missing, or remains clogged after cleaning
• Common symptoms include persistent smoke/odors, visible grease buildup, or a loose/rattling filter

• Disconnect power before servicing and allow the appliance to cool completely
• Open the filter access, release the retaining latch or screws, and remove the old filter
• Slide the new filter into place, matching the original orientation/tabs
• Ensure the filter is fully seated and secured; do not operate the unit without a filter

The Microwave Filter is an OEM part for Whirlpool microwaves. This filter is designed to capture grease, smoke, and odors generated during cooking, helping to maintain clean air quality and preventing grease buildup inside the microwave and kitchen. The filter measures about 7-1/2 inches wide by 5-1/2 inches deep.

Causes of a bad microwave filter can include clogging from grease and food particles, wear and tear from regular use, or damage from cleaning. A clogged or damaged filter can reduce the efficiency of the microwave's ventilation system and potentially lead to overheating.

Symptoms of a bad microwave filter include:

• Reduced ventilation efficiency
• Excessive smoke or odors during cooking
• Grease buildup inside the microwave or on nearby surfaces
• Visible dirt, damage, or clogging on the filter

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This grease filter traps airborne grease and cooking residue from the vent airstream. Replacing a worn or clogged filter helps restore airflow, protects the blower and ducting, and reduces greasy buildup on surrounding surfaces.

• Captures grease particles before they reach the fan and ductwork
• Helps maintain proper ventilation performance
• Common symptoms of a bad filter: lingering odors, poor venting, visible saturation or damage, rattling or loose fit
• Regular replacement supports cleaner operation and effective exhaust

• Disconnect power to the hood or microwave before servicing
• Access the filter from the underside; release the latch or fastener and remove the old filter
• Install the new filter in the same orientation as the original; ensure it is fully seated and secured
• Do not operate the vent without a grease filter in place

Color: metallic. Measures about 15 inches wide by 8 inches deep.

The Dishwasher Filter Screen is an OEM part for Whirlpool dishwashers. As a key filtration component, the filter screen traps food particles and debris to prevent clogs and ensure optimal water circulation during wash cycles. It is responsible for filtering out contaminants and protecting internal pump components from damage.

Symptoms of a bad filter screen include:

• Reduced or uneven water pressure during wash cycles  
• Puddles or pooled water inside the dishwasher
• Food debris caught in the pump or other areas  
• The dishwasher fails to fill or drain properly
• Unusual noises emanating from the dishwasher

Causes of a bad filter screen can include clogging over time due to accumulated food waste and mineral deposits or damage such as cracks or tears in the screen material.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers.

This refrigerator water filter housing secures the filter cartridge and channels water through the system. Replacing a cracked or leaking housing helps restore proper water flow and leak-free dispensing and ice production.

• Holds and seals the water filter; connects the inlet and outlet water lines
• Routes filtered water to the dispenser and ice maker
• Common failure signs include leaks at the filter area, slow/no dispensing, or no ice production
• A worn housing can prevent the filter from seating or staying locked in place

• Unplug the refrigerator and shut off the water supply before starting.
• Dispense water to relieve line pressure; keep a towel handy for residual water.
• Note tube orientation; transfer any brackets or fittings from the old housing as needed. Ensure tubing is fully seated and locked.
• Restore water and power, then check for leaks and flush the system per the filter instructions.

This replacement housing serves as the structural cover/mount for a specific appliance assembly. Replacing a cracked or damaged housing restores secure mounting and protection so components stay aligned and operate as intended. What it does:

• Holds and positions the related components for correct operation
• Shields internal parts and wiring from impact and vibration
• Restores proper fit when the original housing is cracked, warped, or broken
• Common symptoms include loose/misaligned parts, rattling noises, broken tabs, or visible damage in the affected area

• 1 housing

• Disconnect power; if the serviced area ties into water, shut off the water supply
• Wear cut-resistant gloves; edges and surrounding sheet metal can be sharp
• Transfer any sensors, seals, or hardware from the old housing to the new one
• Reuse existing screws/clips; align carefully and do not overtighten, then test operation

This charcoal filter fits an over-the-range microwave hood and absorbs cooking odors when the unit is set to recirculate indoors. Replacing a saturated filter restores effective odor control and helps keep vent airflow unobstructed.

• Absorbs smoke and odors in non-vented/recirculating installations
• Helps maintain proper vent airflow and fan performance
• Common signs it's due: lingering odors, weak vent suction, dark/discolored filter media, or a damaged/crumbly filter
• Restores intended odor-reduction performance after the original filter is saturated

• Disconnect power to the microwave before servicing
• Remove the upper grille/access panel to access the charcoal filter compartment
• Slide out the old filter; install the new one in the same orientation and seat fully
• Reinstall the grille, restore power, and test the vent fan