Range / Cooktop / Oven Parts
Genuine Bosch part
By: Bosch
Part Number: 00492431
The Bake Igniter is an OEM part for Bosch wall ovens and ranges. Located at the bottom of the oven cavity, it generates the radiant heat needed to initiate the bake burners.
Causes of a bad bake igniter can include failure of the delicate calrod-style heating element from prolonged high-temperature exposure over time.
Symptoms of a bad bake igniter include:
- Inability to ignite or maintain ignition of the bake burners
- Improperly or unevenly heated oven cavity
- Cool or cold spots appearing on bake results
- Igniter glows, but fails to ignite
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Thermador professional cooktop grill no longer working Terry B. • Orlando , FL • January 09, 2016
Replaced the ignighter and gas safety valve. Have to remove knobs, front panel and grill housing to access these parts.
Read more
More
$141.44
- Compare At:
-
$166.90
- You Save:
-
$25.46
Genuine Ge part
By: Ge
Part Number: WB30T10099
The Radiant Element is an OEM part for GE ranges and cooktops. This part provides efficient and even heating for cooking. This part uses electricity to heat up and transfer warmth directly to the cookware. The radiant element is encased under the glass surface of the cooktop, offering a sleek and easy-to-clean cooking area while ensuring optimal heat distribution and cooking performance.
Causes of failure might include a burnt-out heating coil, damage to the element's electrical connections, or a malfunction within the control system that regulates power to the element.
Symptoms of a bad Radiant Element include:
- The element not heating up, leading to insufficient cooking temperatures.
- Uneven heating, causing inconsistent cooking results.
- The cooktop surface not responding or only partially heating, indicating a possible failure in the element's circuit.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Large dual burner Frederick E. • Athens , AL • September 19, 2014
Stove is a GE Adora Model JBP63HH2bb. It took me forever to figure out how the burner was attached to the rails.
My glass top was different than any instructions found on the internet for changing out a burner. The burners on this one are held to the bottom of the glass cook top by two rails that cross the bottom of the burner assemblies. In order to get too the burners you must remove 4 Phillips screws to lower the rails and burners from the cooktop. I suggest two people do this because...
Read more
More
$123.59
- Compare At:
-
$147.07
- You Save:
-
$23.48
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255401
Oven not heating or baking unevenly? The bake element often fails after years of use. Easy DIY fix in minutes—unplug, unscrew, and replace wires.
Do-It-Yourself Stories from Customers like You
Burned out element Sean B. • Raleigh , NC • August 27, 2016
Finding the part and getting took less than three days. Installing it was simple and took only a screwdriver and 10 minutes of my time .
Read more
More
$157.67
- Compare At:
-
$186.05
- You Save:
-
$28.38
Genuine Ge part
By: Ge
Part Number: WB13K10043
Fix an oven that won't light or heat with this igniter glow bar. Common repair for gas ovens that click but don't ignite. Simple 5-15 minute DIY fix.
Do-It-Yourself Stories from Customers like You
Replaced ignitor glow bar/deflector/deflector oven kit for GE lower gas oven. Nathan M. • Butte , MT • December 30, 2019
Ordered everything from AppliancePartsPros.com and they were helpful, reliable and friendly in our interactions. Can't recommend them more for a vendor.
First go get a ton of stainless steel sheet metal screws - about 20 phillips head and 20 nut driver. a drill with a phillips bit and a nutdriver bit and a zip tie and a phillips screw driver and a socket and an extension bit.
Second - unplug your stove, turn off the gas valve on back of the stove and pull it away from the wall so you can...
Read more
More
$103.95
- Compare At:
-
$123.70
- You Save:
-
$19.75
Genuine Whirlpool part
By: Whirlpool
Part Number: W10766544
Control knob for ranges and ovens. Mounts on the front control panel to adjust burner temperature and settings. Replace if cracked, broken, or worn.
Do-It-Yourself Stories from Customers like You
Original knobs made of plactic cracked and had to be replaced Roland J. • San Francisco , CA • April 14, 2017
Replacement knobs ordered and came in 2 days.
Read more
More
$32.64
- Compare At:
-
$39.17
- You Save:
-
$6.53
Genuine Ge part
By: Ge
Part Number: WB44X10009
If your oven won't heat or the bake element burned out, this replacement part restores proper baking. Easy 10-minute DIY install—unplug & swap.
This part fixes the following symptoms
-
Oven not heating evenly
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
The baking element quit working....in fact it BURNT in half!!!! My stove is 15 years old and used everyday. Marsh C. • Waterloo , IN • March 21, 2014
Checking for part replacement.....found your website.....I thought I had the right part, but called the tech/order line. Spoke to a very knowledgable tech, which she checked the stove serial # vs the part I thought I could use. The Tech advised that it WAS NOT and related the findings. I agreed after a short discussion and ordered the new element. The order was placed on Monday afternoon, on TUESDAY the FEDX truck pulled in with the replacement element!!!!!!!
I watched the video offered on...
Read more
More
$75.41
- Compare At:
-
$90.49
- You Save:
-
$15.08
Genuine Ge part
By: Ge
Part Number: WB32X106
This 8-inch chrome drip pan sits directly beneath a large surface burner on an electric range, catching spills and food drips before they reach the stovetop cavity below. It reflects heat upward toward your cookware, improving cooking efficiency. Replace it when your existing pan is warped, heavily stained, or so corroded that it can no longer be cleaned.
Do-It-Yourself Stories from Customers like You
Couldn't find drip pans to fit my stove Sharon C. • Midway , TN • February 23, 2016
The drip pans I ordered fit my stove perfectly. I was extremely happy. I had tried drip pans from Wal Mart and Lowe's and they wouldn't sit right in the stove.
Read more
More
$25.76
- Compare At:
-
$30.40
- You Save:
-
$4.64
Genuine Whirlpool part
By: Whirlpool
Part Number: 74004105
Oven not heating or baking unevenly? This lower bake element is often the cause. Simple DIY fix—remove back panel, disconnect wires, swap element. Works!
Do-It-Yourself Stories from Customers like You
Lower oven would not heat up on maytag gemini electric range Jason B. • Boylston , MA • October 19, 2014
Replaced lower and upper element. Internet research suggested it was the control board. Thankfully it was a much quicker and cheaper fix.
Read more
More
$80.95
- Compare At:
-
$97.14
- You Save:
-
$16.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3148952
The Infinite Control Switch is an OEM part for Whirlpool ranges and cooktops. This part allows for precise adjustment of the heat level, enabling users to achieve the perfect temperature for various cooking techniques, from simmering to boiling.
Causes of a bad Infinite Control Switch can range from electrical issues, such as short circuits or worn contacts, to mechanical failures within the switch itself.
Symptoms of a malfunctioning Infinite Control Switch include:
- Burners not heating to the set level or overheating
- Inability to adjust the burner temperature
- Burners not turning on or off when the control switch is operated
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Two of my stove burners were working erratically sometimes too much heat sometimes too little Ronald S. • Plantation , FL • March 11, 2016
Replaced the switches.
Read more
More
$52.68
- Compare At:
-
$62.16
- You Save:
-
$9.48
Genuine Ge part
By: Ge
Part Number: WB20K10027
Fix an oven that won't reach temperature or runs too hot/cold. This temperature sensor monitors oven heat accurately. Easy 15-minute DIY repair.
Do-It-Yourself Stories from Customers like You
My ge oven had a problem maintaining accurate temp Robert A. • California City , CA • April 19, 2014
After ordering, and receiving a new Temp Sensor, I simply replaced the sensor, which was an extremely easy job, and completely resolved my problem.
Read more
More
$31.34
- Compare At:
-
$36.98
- You Save:
-
$5.64
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4449253
The Inner Oven Door Glass is an OEM part for Whirlpool ovens. It is a crucial component of the oven door assembly, providing an interior glass layer that helps to insulate the oven and keep the heat inside during cooking. The glass measures approximately 17 inches x 10 inches.
Over time, the inner oven door glass can become damaged due to exposure to high temperatures, impacts, or general wear and tear. Causes of a bad inner oven door glass include cracks or shattering from accidental impacts, thermal stress from frequent temperature changes, or degradation over time.
Symptoms of a bad inner oven door glass include:
- Visible cracks or shattered glass
- Heat escaping from the oven during use
- Difficulty maintaining the desired oven temperature
- Unusual odors from burnt food debris trapped between glass layers
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Kitchenaid over door broken glass replacement Robert L. • Los Angeles , CA • November 09, 2019
The most difficult part was figuring out how to take the door off as the manual instructions were not clear. Thank you, YouTube for your help. This door doesn't have the more modern release latches. You open the door all the way and stick Allen wrenches into the holes that appear by the joint of the latch. When you close the door to 3/4 or 7/8 closed, the latches are released from the unit and by holding the sides of the door, you pull it out.
The whole replacement would take around an hour,...
Read more
More
$89.95
- Compare At:
-
$106.14
- You Save:
-
$16.19
Genuine Ge part
By: Ge
Part Number: WB30X46986
Broil element not heating or burned out? This upper oven heating element restores broiling function. Easy DIY repair—remove 4 screws and reconnect wires.
Do-It-Yourself Stories from Customers like You
Broiler element was not working Ricky S. • Bethlehem , GA • December 18, 2014
Ordered a new one. took out 4 screws. Pulled the 2 electrical connectors loose and removed. Replaced the same way. FIRST thing to do is to turn off the power.
Read more
More
$87.79
- Compare At:
-
$103.59
- You Save:
-
$15.80
Genuine Ge part
By: Ge
Part Number: WB44X5099
Oven not heating or baking unevenly? This bake element restores proper heat. Simple 5-minute screw-in install with basic tools. Fits select GE ranges.
This part fixes the following symptoms
-
Oven is too hot
-
Oven not heating evenly
-
Won't start
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Baking element broke broiler never worked since I moved in 13 years ago and the four burners on the stove top were slowly dying Marybeth K. • Milltown , NJ • November 13, 2017
With the help of Wendee and Karen, we finally figured out my model numbers and which parts where correct. I ordered the parts and all arrived the next day except for the Broiler element which arrived in 2 days. I installed the new Baking Element myself. Took longer to figure out which curcuit braker to turn off. In about 30 minutes I had a brand new Baking Element in my oven working perfectly. On the following day, I installed the Broiler Element. That took a bit longer as it sits in a metal...
Read more
More
$45.30
- Compare At:
-
$56.01
- You Save:
-
$10.71
Genuine Ge part
By: Ge
Part Number: WB2X8228
Burner not heating? Replace the element receptacle and wire kit. Fixes burned or broken receptacles causing inoperative burners. DIY-friendly repair.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
One of the burners on my 1990s (?) Hotpoint electric stove was unreliable heating up around 2/3 of the time Earl R. • Presque Isle , ME • August 11, 2022
I ordered the recommended Infinite Heat Switch Kit and Element Receptacle and Wire Kit and installed them. The latter was a breeze, appearing to be exactly the same as the original, except for the wire color. The switch, though, was another story. It is a RobertShaw "replacement" part, designed, it seems, for use in the greatest number of original units as possible. The most obvious difference between this switch and the original (besides its comparatively small size) is the long, segmented...
Read more
More
$28.95
- Compare At:
-
$34.16
- You Save:
-
$5.21
Genuine Ge part
By: Ge
Part Number: WB48T10095
Replacement oven rack for electric and gas ranges. Installs inside oven cavity. Needed when original rack is missing, damaged, or warped from use.
Do-It-Yourself Stories from Customers like You
Stove was missing rack Jack S. • Cloverdale , CA • December 30, 2014
Orded rack by stove model number. fit perfect
Read more
More
$69.59
- Compare At:
-
$82.12
- You Save:
-
$12.53
Genuine Ge part
By: Ge
Part Number: WB24X25397
Fix a microwave that won't start or stops mid-cycle with this door interlock monitor switch. Ensures safe operation when door closes. DIY repair.
Do-It-Yourself Stories from Customers like You
When a power up of any kind was selected timer or clock ran down but turntable or cook mode never started when door was moved a little it would start to work then stop research suggested door switch James D. • Smyrna , TN • December 28, 2014
Removed and replaced 3 door switches and mounting bar that holds switches plastic gets brittle with age and each switch comes out slightly different from each other, the chances of breaking a mounting pin is very easy. care should be taken when snapping mounting bar back into place to insure top latch and bottom latch locate properly insure bar is proper aligned when tightening screws their is free play in mounting bracket that could affect door properly engaging switches. NOTE that their are...
Read more
More
$30.61
- Compare At:
-
$36.73
- You Save:
-
$6.12