Range / Cooktop / Oven Parts
Genuine Ge part
By: Ge
Part Number: WB24T10146
Burner won't turn off or stays on when set to off? This surface burner infinite switch controls heat levels. Takes 10-15 minutes to replace.
Do-It-Yourself Stories from Customers like You
Burner wouldn't turn off Bryan S. • Saint Louis , MO • May 06, 2016
Replaced switch! Easy....
Read more
More
$39.95
- Compare At:
-
$47.94
- You Save:
-
$7.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9760771
Oven not heating or broiling? A failed broil element often shows blistering or breaks. DIY repair in under 30 minutes with a screwdriver.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Broil Heating element shorted. Noel D. • Palmdale , CA • March 28, 2014
Found a real cool Youtube video by AppliancePartsPro.com. I watched it and learned how easy it was to unhook and replace the part with proper care and precautions. It even included tips on critical steps so the wires won't slip back inside the hole and save you from hours of possible mistake. Then I ordered the part. It came the day after, then I replaced the part, meaning, I DID THE WORK! (My wife was so impressed- lol) Easy as pie... but we made and had a much nicer roast the day after....
Read more
More
$90.43
- Compare At:
-
$108.52
- You Save:
-
$18.09
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304409888
The Terminal Block Kit is an OEM part for Frigidaire appliances, typically used for connecting house power to various electrical appliances like ranges and dryers. This kit includes includes screws, nuts, and a unique terminal block. It plays a critical role in the power supply system by providing a reliable connection point for the appliance's main power cord, preventing loose connections and potential electrical hazards.
Symptoms of a bad Terminal Block Kit include:
- Signs of burning or melting at the connection points,
- Flickering power or intermittent operation of the appliance,
- A burning smell from the appliance area.
Causes of terminal block failure often involve loose connections that can lead to arcing and overheating, improper installation, or general wear and tear that degrades the integrity of the electrical contacts.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Turns out it is the control panel but the terminal block was broken as well Patricia R. • Calera , AL • April 16, 2015
We replaced the broken Terminal Block but have not yet replaced the Control Panel. Will purchase that part from you shortly.
Read more
More
$40.61
- Compare At:
-
$47.92
- You Save:
-
$7.31
Genuine Bosch part
By: Bosch
Part Number: 00617262
Support bracket that secures the microwave door handle. Installs inside the door panel. Replace if cracked, broken, or shattered from regular use.
Do-It-Yourself Stories from Customers like You
One of the two spacers holding the handle snapped Charles F. • Roslindale , MA • December 09, 2016
Since I have already made this same repair twice (once on my own appliance and once on a neighbor's), I'm getting pretty adept at it! Here are the steps:
1. Remove microwave oven door.
2. Using a putty knife, gently pry out the black plastic outer bezel.
3. Remove two visible screws near the latches that secure the inner prongy metal frame.
4. Using a putty knife and/or screw driver, lever up the metal frame by releasing the small tabs on one or two sides - (this is the trickiest part of the...
Read more
More
$22.95
- Compare At:
-
$27.54
- You Save:
-
$4.59
Genuine Ge part
By: Ge
Part Number: WB21X36771
The Infinite Heat Switch Kit is an OEM part for GE ranges and cooktops. This kit is essential for controlling the temperature of the burners on your range or cooktop, allowing you to adjust the heat level from low to high.
Causes of damage to the infinite heat switch can include normal wear and tear from frequent use, electrical issues such as short circuits or power surges, and physical damage from cleaning or impact.
Symptoms of a bad Infinite Heat Switch include:
- Burners not heating to the desired temperature, either staying too hot or not getting hot enough.
- The burner not turning on at all, indicating a possible failure in the switch's electrical contacts or circuit.
- Inconsistent cooking temperatures, where the burner cycles on and off too frequently or not often enough, affecting cooking performance.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Had previously replaced one burner control because the burner indicator light stayed on William A. • Dodge Center , MN • July 13, 2015
I replaced all 3 remaining burner controls because they were all original (mid 1970s GE electric range w/coil burners), and one of the controls occasionally made arcing sounds when cycling the burner on and off. If a control is making odd noises - more than just a quiet metallic clicking
as it cycles - it should be replaced.
I'm assuming you have experience with the tools needed and can do simple mechanical assembly or disassembly, but have not previously worked with electrical equipment of...
Read more
More
$49.72
- Compare At:
-
$59.17
- You Save:
-
$9.45
Genuine Bosch part
By: Bosch
Part Number: 00492431
The Bake Igniter is an OEM part for Bosch wall ovens and ranges. Located at the bottom of the oven cavity, it generates the radiant heat needed to initiate the bake burners.
Causes of a bad bake igniter can include failure of the delicate calrod-style heating element from prolonged high-temperature exposure over time.
Symptoms of a bad bake igniter include:
- Inability to ignite or maintain ignition of the bake burners
- Improperly or unevenly heated oven cavity
- Cool or cold spots appearing on bake results
- Igniter glows, but fails to ignite
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Thermador professional cooktop grill no longer working Terry B. • Orlando , FL • January 09, 2016
Replaced the ignighter and gas safety valve. Have to remove knobs, front panel and grill housing to access these parts.
Read more
More
$141.44
- Compare At:
-
$168.31
- You Save:
-
$26.87
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74003019
Oven not heating or heating slowly? The bake element at the bottom of your oven cavity supplies heat for baking. Simple 2-screw, 2-wire repair.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Oven is too hot
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Oven bake element stopped working Belle K. • Anaconda , MT • August 29, 2014
I'm a 66 year old woman (on a fixed income) and I'd never before repaired an oven bake element . My stove is 20 years old but I still found it was much more affordable to change the bake element rather than buying a new stove. I called the number on the website and talked to a very informative woman. She answered all the questions I had about my stove. She told me about the repair video on the website which had step-by-step instructions. I ordered a new element - received it within 4 days....
Read more
More
$51.62
- Compare At:
-
$61.43
- You Save:
-
$9.81
Genuine Ge part
By: Ge
Part Number: WB03X25796
Control knob assembly for gas cooktop burners. Installs on front control panel. Replace if cracked, broken, spins freely, or won't grip valve stem.
Do-It-Yourself Stories from Customers like You
Broken knobs on my ge stove trying to take them off for cleaning Lisa H. • Bridgeville , DE • June 11, 2016
I used a little too much 'elbow grease' trying to remove the knobs on my GE Stove trying to clean them. I thought they were metal, but they are plastic and I cracked the inside part on 3 of them. I am so happy Appliance Parts Pros sells these knobs for half the price of GE Parts! I did not realize how expensive they are. Ordering was easy and they were delivered in 2 business days!
Read more
More
$45.95
- Compare At:
-
$54.68
- You Save:
-
$8.73
Genuine Ge part
By: Ge
Part Number: WB30T10126
Burner not heating or won't turn on? This radiant heating element restores heat to your cooktop. DIY-friendly repair takes about 10 minutes to install.
Do-It-Yourself Stories from Customers like You
The inner burner was not turning on when using the tri-ring burner Christian M. • Herndon , VA • April 01, 2014
I purchased the replacement part after seeing how easy it was to fix by watching videos online.
Read more
More
$188.76
- Compare At:
-
$224.62
- You Save:
-
$35.86
Genuine Whirlpool part
By: Whirlpool
Part Number: W10196406RW
Drip pan installs under range burners to catch spills and grease. Replace if cracked, warped, corroded, or heavily stained for a clean cooktop.
Do-It-Yourself Stories from Customers like You
Drip pans needed replacing. Lynn J. • Palo Pinto , TX • January 20, 2020
Ordered new drip pans from Appliance Parts Pros, hoping they'd fit perfectly...and THEY DID! We are so happy with them. The ones at other places didn't.
Read more
More
$14.95
- Compare At:
-
$17.64
- You Save:
-
$2.69
Genuine Samsung part
By: Samsung
Part Number: DG44-01006B
Burner stuck on high heat or won't adjust temperature? This dual surface element switch restores precise heat control. DIY repair in about 30 minutes.
Do-It-Yourself Stories from Customers like You
Regulator not working. John Q. • Denver , CO • January 23, 2022
Simple remove and replace.
Read more
More
$141.95
- Compare At:
-
$168.92
- You Save:
-
$26.97
Genuine Frigidaire part
By: Frigidaire
Part Number: 316220728
Control panel overlay for electric and gas ranges. Labels buttons and controls on the interface. Replace if cracked, peeling, faded, or worn out.
Do-It-Yourself Stories from Customers like You
All 4 mounting holes on the oven control board (ocb) broke Jermaine J. • Mastic Beach , NY • May 18, 2015
Unplugged stove. Removed six 1/4 inch socket head screws from back panel. Removed back panel. Removed plug on the back of the OCB. Removed OCB. Used Philips screwdriver to remove four mounting screws (and cracked pieces of the mounting holes). If you can get to this point, installing the new OCB is pretty self explanatory.
Read more
More
$48.49
- Compare At:
-
$58.19
- You Save:
-
$9.70
Genuine Frigidaire part
By: Frigidaire
Part Number: 318372210
Burner not heating or heating unevenly? This coil surface element restores consistent cooking heat. Simple plug-in installation takes just minutes.
Do-It-Yourself Stories from Customers like You
My stove is really old one of my elements started splitting & my drip pans were rusty Juli R. • Dickinson , TX • September 19, 2014
My old White Westinghouse stove has easy replacement of the elements & drip pans. They literally pop in & out with no effort or education necessary.
Read more
More
$37.36
- Compare At:
-
$44.83
- You Save:
-
$7.47
Genuine Ge part
By: Ge
Part Number: WB20K10027
Fix an oven that won't reach temperature or runs too hot/cold. This temperature sensor monitors oven heat accurately. Easy 15-minute DIY repair.
Do-It-Yourself Stories from Customers like You
My ge oven had a problem maintaining accurate temp Robert A. • California City , CA • April 19, 2014
After ordering, and receiving a new Temp Sensor, I simply replaced the sensor, which was an extremely easy job, and completely resolved my problem.
Read more
More
$32.95
- Compare At:
-
$39.54
- You Save:
-
$6.59
Genuine Whirlpool part
By: Whirlpool
Part Number: W11528249
Fix F6-E1 errors, blank displays, or non-functioning ovens. This range control board manages temperature, timers, and cooking modes. DIY install in 30 minutes.
Do-It-Yourself Stories from Customers like You
Clock LED out. Randy G. • Holt , MI • January 22, 2023
I replaced the control.
Read more
More
$209.77
- Compare At:
-
$210.77
- You Save:
-
$1.00
Genuine Ge part
By: Ge
Part Number: WB02X24790
Protective bumper that cushions the burner grate and prevents scratching or denting the cooktop surface. Replace if cracked, worn, or missing.
Do-It-Yourself Stories from Customers like You
Burner bumpers missing Ralph H. • Healdsburg , CA • June 11, 2017
Bought and installed bumpers
Read more
More
$12.38
- Compare At:
-
$14.86
- You Save:
-
$2.48