Range Igniter

We ordered a new ignitor and it came in two days just as promised. The only problem that we experienced was that the leads on the new ignitor were to short. We were able to find enough slack on the oven end to make it work. The oven is once again working great. The video was a little off on what need to be done to disconnect the ignitor. We actually had to flip the oven over to get to the bottom. We could not access the connector through the back. Read more

Checked the internet for a video on how to fix the igniter. I took the burner apart and replaced the igniter. It works perfectly! Read more

I found the model number on the stove and ordered a replacement. It arrived in two days. I replaced the old one and it works great. Read more

• Won't start
• Gas igniter glows, but will not light
• Element will not heat

Accessed your online video on the probable problem and repair, ordered the replacement igniter then replaced it easily. Read more

Replaced the ignition control boards. Read more

• Won't start
• Gas igniter glows, but will not light
• Little to no heat when baking

Replaced the oven igniter, following the general instructions on the ApplicancePartsPro.com website. It took me a little while to figure out how to get to the wiring for the igniter, as I had no access panel on the back to get to the wires. In my particular Whirlpool oven (very old model) it turned out that you have to remove the pots/pans drawer under the oven to get to the exposed wiring at the back. Once I figured this out, the rest of the replacement was a snap. Read more

Replaced both ignitors. Since I was working on the range I also overhauled the final 2 of the 6 burners on the stove top. Venturi tube and jet nuts were frozen and could not remove drip tray for cleaning and access to ignitor clip. Had to drill out Venturi tubes using a tapered bore bit. Used Dremmel with cutting wheel to remove jet nut. This range has been heavily used since new for 16 years. Works like new, again. Read more

You guys saved me 1600+ Dollars!! After some research and testing I found the igniter for my stove was not working. The top burners worked, and the oven worked on broil. After watching the video on your website, I took lower pan and flame spreader out. I then turned on the stove and saw that the igniter was not glowing. I put in the model number for my stove on your website, and ordered a replacement igniter. In 2 days I received the igniter. It Installed with basic hand tools in about 15... Read more

Internet suggested if yellow light happened time to replace. Bought two since I was having trouble with both for years. Would have been nice for a video to exist. The removal was nothing like what is out there and extended the time of the job. Read more

Replaced the igniter glow bar. Read more

I disassembled the top of the range and looked at the problem burner. It looked like there was a spark at all three other burners but not the problem burner. There was a visible spark at the connector between the wiring harness and the ceramic igniter but that spark wasn't making it up to the top of the igniter where it can light the burner. I ordered a new igniter for $19 and it was on my doorstep the next day. I replaced the part and now my wife thinks I am a genius. Don't tell her that... Read more

I replaced all 4 ignitors and new clips. Read more

• Little to no heat when broiling

Ordered ignition device and installed it. Read more

Read the reviews on your site and watched your video and decided it was worth a try to fix rather than to replace stove. Ordered the igniter for the oven then I also ordered the igniter for the broiler as it was sluggish as well. When you go, go all the way. Only problem I had was with the wire nuts, wish that something more substantial was provided. Got the stuff quickly, as promised and installed as per video and oven and broiler work like new. Thanks!!!!! Read more