Need Help?
Call or text
Fix a gas burner that won't light or produces weak sparks. This cooktop igniter creates the spark needed to ignite your gas burner. DIY-friendly repair.
The igniter was sparking, but the spark did not appear as bright as the other burners. Swapped the burner and lid since that is where contact is made. Did not help. Came to the conclusion it was a faulty igniter. I ordered parts, replaced the igniter and now the range burner works fine. Read more
Oven won't heat or takes forever to reach temperature? A weak or failing igniter is the likely cause. This range oven igniter is a 10-minute DIY fix.
Replaced both ignitors. Since I was working on the range I also overhauled the final 2 of the 6 burners on the stove top. Venturi tube and jet nuts were frozen and could not remove drip tray for cleaning and access to ignitor clip. Had to drill out Venturi tubes using a tapered bore bit. Used Dremmel with cutting wheel to remove jet nut. This range has been heavily used since new for 16 years. Works like new, again. Read more
Fix a broil burner that won't light or clicks repeatedly. This spark electrode generates the ignition spark needed for reliable broil operation.
I replaced the Gas Range Broil Burner Spark Electrode Read more
Fix burners that won't click or ignite without turning on another burner. This spark electrode creates the spark needed to light gas burners. DIY repair.
Of course, before disassembling anything, I unplugged and turned off the gas supply. To replace the spark electrode, I removed the drip pan/surface to gain access to the burner assemblies. Next, I unscrewed (with a 1/2" open-end wrench, I think) and disconnected the gas supply tubing from the burner assembly with the cracked electrode, and then unscrewed the assembly itself from the base surface. With the assembly detached, I flipped it over and removed the screw that secured the cracked... Read more
Fix a burner that won't light or sparks weakly with this gas cooktop igniter. Remove the burner cap and brass nut to access. Takes 5-10 minutes to install.
Appliance pros had the part. Incredibly, we received it the next day. They sent a confirming e mail with general instructions on how to replace it. Worked like a charm! Our's is a Bosch unit. The retaining brass nut in the center of the burner is an odd size-20 mm which I did not have among my many automotive metric tools. The local Auto Zone though had a 20 mm socket. Once that was removed the procedure would have been a breeze except the retaining screw on the old igniter was frozen. ... Read more
If your gas burner won't light or clicking but no spark, the spark electrode may be faulty. This part generates the spark to ignite gas burners.
Fix a gas burner that won't light or clicks but doesn't ignite. This range surface burner igniter creates the spark to light your stovetop. 15-30 min repair.
I removed the burners and replaced the igniters. The burners must be removed because the igniters go underneath them. This job turned out to be very difficult because my stove is 16 years old and the screws holding down the igniters were completely rusted and bound to the stove top, so I had to drill out all of the screws. Also, the burners were bound to the gas flues by mineral deposits and separating them was very difficult. Once I got the stove top up, I threaded the igniter wires to the... Read more
Oven won't light or heat? This flat-style gas oven igniter is the most common fix. Simple DIY repair takes 15-30 minutes with basic hand tools.
I put in a new igniter. Very simple Read more
Fix burners that won't spark or click but light with a match. This spark electrode restores ignition on gas cooktops. Typical 15-minute repair.
The burner lit when I used a lighter so figured it was electrical. There were only 2 electrical components so I first tried replacing the block terminal. This did it, very simple and saved $250 on a whole new unit. Read more
Fix burners that won't light or spark continuously. This igniter electrode restores reliable gas ignition. DIY-friendly repair in about 15 minutes.
Ordered part at 4:33 on Friday and FedEx dropped it at my door at 9:35 Sat a.m. I did not pay for expedited shipping. I had trouble getting to the offending part as the illustration of the parts was less than desirable. i called the help line and the agent was very helpful with ideas to try as he was looking at the same illustration as I. I did finally figure out the correct way to access the part and once I removed the rusted screws, the repair took only 5 minutes even though I spun my... Read more
This spark electrode mounts at the bake burner and creates the ignition spark to light the oven flame. Replacing a worn or cracked electrode restores fast, reliable bake ignition and consistent oven temperatures.
Had a repair person come into my home and he suggested a different ($200) part, labor would have been another $125. Seeing that it would cost almost $400 fix it, we were just going to buy a new oven. The next day, I called Appliancepartpros and spoke to someone from their support. I explained the symptoms and they suggested this $50 part and told me that I could return it, even if it didn't work. Figured I had nothing to lose. Based on the diagram they sent, I was able to fix the oven (I'm... Read more
Unpredictable or incomplete oven heating? This high voltage electrode and harness assembly transmits electricity to ignition components in your gas range.
If your gas range burner sparks but won't light or clicks continuously, this electrode and harness assembly restores ignition. Easy DIY installation.
Ordered new igniters/wires Read more
Burner won't light or clicks continuously? This spark electrode creates the arc that ignites gas at the burner. Simple DIY repair restores ignition.
Took apart the top of the stove and replaced ignitor Read more
Burner won't light or clicking with no spark? This igniter creates the spark to light gas burners. Easy press-fit installation takes 15 minutes.
I removed all the individual burners so I could lift the stainless cover to expose the igniter wires. I cleaned all the wire connections and the 4 good igniters and replaced the one bad igniter. Reassembly was easy and everything worked properly when done. Video of repair was helpful and all parts ordered were correct and shipped promptly and I will definitely use AppliancePartsPros again. Read more
If your gas burners won't light or click continuously, a cracked or worn dual-burner igniter is often the cause. Restores reliable ignition to both burners.
Checked the internet for a video on how to fix the igniter. I took the burner apart and replaced the igniter. It works perfectly! Read more