Spark Module

This spark module controls the ignition sparks for a gas range or cooktop, letting the burner surface and oven ignite reliably. Replaces a failed ignition control to restore sparking at the burner electrodes. What it does

• Sends timed spark pulses to burner electrodes so gas ignites when a burner or oven is turned on
• Replaces a failed or intermittent ignition source that causes clicking without ignition
• Commonly used when one or more burners won't light or spark consistently
• Works with electrode wires and ignition switches to coordinate burner ignition

• Spark module (1)

• Disconnect power and shut off the gas supply before starting work
• Label or photograph existing wire connections to ensure correct reconnection
• Handle the module and wiring harness carefully; avoid pulling on wires or connectors

If your gas range burners won't ignite or clicking continues after lighting, the spark module may have failed. A moderately difficult repair.

Fix burners that won't ignite or igniters that won't stop clicking. This spark module generates the high-voltage spark needed to light gas burners.

Fix burners that won't ignite or keep clicking with this ignition spark module. Controls high-voltage sparks for cooktop burners. DIY-friendly repair.

This spark module supplies the high-voltage pulses that ignite the surface burners on a gas cooktop or range. Replacing a failing module helps restore consistent clicking and spark so burners light promptly and reliably.

• Supplies high-voltage to up to five surface igniters (5+0 configuration)
• Sends spark when a burner control is turned to Lite
• Failure symptoms can include no spark on all or multiple burners
• May also cause intermittent/weak spark or continuous clicking

• Disconnect power and shut off gas before servicing
• Note wire locations; move one connector at a time to matching terminals
• Mount securely in the original position and ensure proper grounding
• After replacement, if only one burner won't ignite, inspect that burner's switch and igniter

The cooktop spark igniter module is an electrical component that generates the high-voltage spark needed to light all four burners on your gas cooktop. It receives a signal when you turn a burner knob and simultaneously fires sparks at each igniter electrode. Replace this module if one or more burners won't spark, burners click continuously even when not in use, or the cooktop fails to ignite at all.

Fix burners that won't ignite or click continuously with this spark module. Routes high-voltage pulses to electrodes for reliable ignition on gas cooktops.