Need Help?
Call or text
This is a genuine ignition module for Husqvarna engines on select outdoor lawn equipment. The ignition module includes the ignition coil and spark plug connector in a single piece. This module is used to transfer the electric charges from the flywheel magnets. This ignites the fuel-air mixture in the cylinder and creates the combustion that powers the engine. Over time, the ignition module can become worn or the spark plug connector can snap off or get damaged, causing a need for replacement. Without a properly functioning ignition module, the engine will not be able to start. This OEM ignition module is manufactured to exact standards for use in Poulan and Husqvarna string trimmers. It is a replacement for the original part and is sold as an individual unit. The spark plug and other parts and hardware will require an additional purchase. To replace this part, allow the engine to cool and disconnect the old ignition module from the spark plug. Then, detach the other side of the module and replace it with the new part. Reconnect the spark plug and the job is done. Be sure to allow the engine to cool and wear gloves when performing this repair.
Usually ships within 4 - 14 days
Control cable wire harness assembly for grass line trimmers. Replaces damaged, frayed, or broken wiring harnesses. Essential for restoring connections.
Fix fuel leaks or engine flooding on your riding mower with this fuel check valve. Controls fuel flow between tank and carburetor. Easy DIY repair.
This is a standard fuel cap for a hedge trimmer, chainsaw, or weed eater. The fuel cap assembly goes into the tank then screws onto the top of the fuel tank. A fuel cap keeps dirt and debris from falling into the fuel tank and gunking up the engine, causing it to misfire or corrode. Fuel cap assemblies are made of plastic, so they can dry out and snap. If the rubber seal on the fuel cap assembly is no longer preventing fuel from leaking, it’s time to replace it. Installing a new fuel cap assembly is simple. Just push the stopper in and screw on the lid. This is a genuine OEM product shipped from Husqvarna, the manufacturer of this part. This part is also compatible with Craftsman and Poulan products. Part sold individually.
This genuine replacement ignition module is part of the starting system in select models of gas string trimmer/edger units. It connects the spark plug to the engine and supplies the electric current to generate the spark for ignition. In the event that the module wears out or becomes defective, the engine may fail to start. With a faulty ignition module, it will be difficult to operate equipment if it works at all, which is why an immediate replacement with an OEM part like this is necessary. This genuine OEM ignition module is manufactured by Husqvarna and compatible with select trimmers from Poulan, Weed Eater, and Husqvarna. This unit includes the ignition module, the rubberized wire, and the spark plug boot or cap. Hardware and other components are not included. It may be a good idea to replace the spark plug when replacing the ignition module if it has not been replaced recently. Be sure to wear gloves and allow the engine to cool before doing any repairs on the ignition or other engine components. Be sure to disconnect the power supply before beginning any repairs for safety, as well.
Replacement fuel tank cap assembly for gas blowers and trimmers. Includes retainer connection. Replace if your cap is cracked, won't seal properly, or missing.
Black airbox base panel for gas and grass line trimmers. Replaces cracked, broken, or missing base that secures the air filtration system housing.
This transmission control cable is made for riding lawn mowers and garden tractors. It is the cable that engages the gear case to drive the equipment. Over time, it may wear out or become damaged, eventually requiring a replacement. Check the drive control cable when the lawn mower won't move or moves forward slower than usual, because the drive cable can stretch over time. The user won't be able to move the drive lever if the cable is too corroded to slide inside its sheath. If the cable is cut, the mower will not move. Replace the control cable if it's damaged or cut.Replacing the transmission control cable will require a selection of hand tools, including a screwdriver, ratchet, and sockets. Owner's should wear gloves when working on their lawn tractor, and always follow the owner's manual instructions.This transmission control cable is compatible with Husqvarna-branded lawn tractors. This replacement will also fit other Husqvarna produced brands, like AYP, Craftsman, Jonsered, McCulloch, Poulan, Poulan Pro, RedMax, Weed Eater. This is an OEM part and is sold individually.
Protective gear cap for riding mowers and lawn tractors. Shields internal gears from debris and damage. Replace if cracked, broken, or missing.
Transfers power from engine to wheels on gas snowblowers. Replace if cracked, worn, or slipping. Verify your model number for proper fit.
Control cable for gas and grass line trimmers. Connects handle controls to transmission. Replace if cable is frayed, broken, or binding during operation.
Throttle control cable for gas line trimmers. Connects the throttle trigger to the engine carburetor. Replace if cable is frayed, kinked, or broken.
This is the front wheel assembly that is used by a large number of manufactures as the standard wheel for push mowers. This wheel is a tough, black rubber wheel fitted onto a sturdy white chassis. Since it is not a pneumatic wheel, there is no concern that it will roll over hidden debris and be damaged. Push wheels such as these often last the lifetime of a Lawn Mower. However, there are occasions when the housing of the mower is dropped and the wheel becomes warped or broken. It's also the case that, with constant use, the wheels can lose tread, making them harder to maneuver in tough mowing conditions. It has also been reported that the tires will wear and become smaller in circumference over time, meaning it will require more gasoline to mow the same amount of yard. The front wheels are easily replaced. After removing the plug cap and stabilizing the mower, simply use a socket wrench to remove the center bolt from the wheel. It's a good idea to use a dry lubricant like graphite on the axle before replacing it. This OEM guaranteed replacement part is compatible with Ryobi, Yard Machines, Troy-Bilt, Cub Cadet, Husky, Yard-Man, and MTD push mowers.
Fuel line assembly for gas string trimmers. Carries fuel from primer bulb to tank and carburetor. Replace if cracked, brittle, leaking, or damaged.
This gasket is a genuine MTD part. It is an insulator gasket meant as a replacement part on tillers, string trimmers, leaf blowers, edgers, and cultivators. The insulator gasket seals the connection between the insulator and cylinder. This gasket is made of durable, heat-resistant plastic. To replace the insulator gasket, a pair of work gloves, wrench, and screwdrivers are necessary. This gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Cub Cadet, MTD Pro, Troy-Bilt, Yard Machines, and Yard-Man.