Need Help?
Call
This is the trimmer head assembly for a string trimmer, housing the cutting line and feed mechanism. It attaches to the end of the drive shaft and spins at high speed to cut grass and weeds. Replace it if the line no longer advances properly, the head is cracked, or the internal spool mechanism is worn out.
Usually ships within 4 - 14 days
Throttle cable for gas line trimmers. Connects carburetor to throttle trigger. Replace if damaged, kinked, frayed, or broken during use.
This is a quality rear engine cover that is used on several types of string trimmers. The component is tightened onto the back of the trimer to offer protection and shielding to the engine. It is made of a durable material and comes with both the cover and four screws to attach it to a string trimmer. Over time, the rear engine cover can become damaged, broken, or lost and should be replaced to ensure the engine is protected.Check the rear engine cover for cracks and other damage before installing a new replacement part. First, remove the screws from the rear engine cover so it can be taken off of the string trimmer. An O-ring may be needed to create the proper clearance when installing the new rear engine cover. Make sure to properly tighten the screws on the cover before use.This rear engine cover is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The engine cover is designed to be compatible with string trimmers manufactured by Bolens, MTD, Yard Machines, Murray, and Craftsman.
This lower boom assembly is for use with gas trimmers. Another name for the part is a lower shaft assembly. It is a replacement used for missing or faulty lower shaft housing assemblies on the trimmer. The lower housing is responsible for holding the spool that cuts the grass.If there is a problem with this component in the trimmer, it will not function properly and could be dangerous to operate. The lower housing may not be able to hold the spool properly. The shaft on the trimmer is durable, but it could become damaged during operation. There is also the chance that corrosion could affect the quality of the lower boom over time. Whenever there is a problem with the shaft, the best course of action is to replace it before it breaks entirely.The lower boom assembly for trimmers is compatible with a range of models from MTD, Yard Machines, and Murray. It is made from durable metal. This is a genuine OEM part sourced from the manufacturer. It is sold individually.
Fix a gas line trimmer that won't start with this starter assembly. Replaces worn recoil mechanisms causing hard pulls or no-start conditions.
Boom assembly for gas line trimmers. Replaces broken, cracked, or damaged boom tubes. Essential structural component for proper trimmer operation.
Air cleaner assembly cover for gas line trimmers. Protects the air filter from debris and damage. Replace if cracked, broken, or missing to maintain proper filtration.
This electronic component generates the spark for engine ignition in gas-powered line trimmers, mounted near the spark plug. Replace it when the trimmer won't start, has difficulty starting, or runs erratically.
Attaching to the front lift link, this washer is a component for use with lawn tractors. A washer is a component that is used with a screw fastener. Its purpose is to keep the screw from loosening by distributing the load over a larger area. A new washer may be needed if the user has mistakenly misplaced the original. When dealing with small parts, it's a good idea to place them in a container so that they are not lost. The washer could physically break over time due to normal wear and tear. If this is the case, it will need to be replaced so that the screws do not loosen. The repair person may choose to wear gloves to protect his or her hands during the replacement process.This washer is sold individually. It is an OEM part that is sourced directly from the manufacturer. It's compatible with lawn tractors that are manufactured by the Husqvarna, Poulan, and Craftsman brands.
Flange bearing for lawn tractors and snow blowers. Replace if you notice excessive noise, vibration, or rough wheel rotation. Verify fit with your model.
A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.
Starter rope won't retract after pulling? This recoil pulley and spring assembly fixes rope retraction issues on mowers and small engines. Direct fit.
This genuine OEM Part is a choke temperature control rod for lawnmowers. The choke temperature control is the metal piece that regulates the choke temperature allowing for it to function properly within a lawnmower. If the choke function is no longer working efficiently, it might be time to replace the choke temperature control. Luckily, replacing this part is a simple repair.Before beginning, make sure the engine is cool to avoid getting burned. Locate the old choke temperature control rod and remove the screws to the mounting assembly that hold the rod in place. Once removed, lift the old choke temperature control out and away from the mower and set it to the side. Replace with the new control rod and secure the mounting screws. Start up the mower to see if the choke function is working properly. If it does, the installation was a success. This replacement part is sold individually and is compatible with MTD brand lawnmowers.
Wound spool assembly for gas and grass line trimmers. Holds and feeds trimming line during operation. Replace if cracked, broken, or worn for proper use.
This is the air filter element for a string trimmer engine. It prevents dirt, dust, and debris from entering the carburetor and combustion chamber, protecting internal engine components. Replace this filter if the trimmer is hard to start, runs rough, loses power, or if the filter is visibly dirty or damaged.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.