Wall Oven Heating Element

Turned stove breaker off in the main breaker box and also unplugged the oven from the 220 outlet. pulled the baking racks out of the oven and proceeded to locate the 1/4 screws just above the bake element where it passes through the metal wall and removed them. pulled the element forward until the wires were exposed and unplugged them and then attached the new element to the wires and reinstalled in reverse order. Read more

Range has no model ID plate anywhere. Flip off electric at circuit breaker box. Opened top of range and noted details of the faulty burner, including confirm that outer coil was fried. The maker info on back of element was useless in finding replacement: more useful was general shape, and the numbers around edge on back. Close up range, since low heat element still working. Turns out all Maytag double oven Gemini ranges use the same hi-low element, but double check appearance just in... Read more

Replaced the elements with new ones ordered through Appliance Parts Pros. I wanted to tell you how pleased I am that I ordered the baking and broiler elements for my Maytag oven from you. Your website diagrams for my model of oven helped immensely in figuring out what parts I needed. Your order process was easy and the parts arrived within two days just as stated. Best part of all, the new elements work perfectly! I will bookmark your site for future appliance part needs and I look forward to... Read more

Ordered part and installed it. Broiler works as advertised. Read more

• Little to no heat when baking
• Oven not heating evenly

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

Replace element. Read more

It was very easy caled up ordered the part no prblem got it in 3 days.Got a phillips screw driver removed the top of the stove took out the old one a put in the new one had it fixed within minutes very easy diy no need to pay someone alot of money for this easy fix. Read more

In the middle of Christmas baking, I noticed that it was taking a really long time to bake bread. Since I had already done 5 batches and the timing was always the same, I knew when I had to add 20 min, something was wrong. My oven thermometer (I bought at target) no longer worked so it was hard to tell the exact temperature. First, I went and bought a new thermometer to see the actual temp, then I set the oven to 350 degrees and checked to see what the thermometer was showing. It was almost 50... Read more

Removed the element "easy just four screws" unplugged two connecting wires, removed element. Did a "continuity test" on element, it failed, so I ordered a new one and installed it. It works great now. Read more

We ordered a new elimate, which was shipped the same day. Very good. Read more

• Element will not heat

I diagnosed the problem, found Appliance Parts Pros and watched their video. It was as easy as the video they made said it would be. Overall an amazing experience. I was quoted $250 to have the repairman come do the same thing. My cost was $40. Read more

When the element on our 15 year old builder grade oven went out we were worried it was time to spend thousands on a new oven. Instead, we found the replacement part on appliancepartspros.com and decided to give replacing it a shot, after all it was $80 instead of $1600. We weren't entirely sure the replacement was the right part because our oven model had an extra "0", but given it came up when I searched for the oven model (if not on the compatability checker) and the refund guarantee we... Read more

• Element will not heat
• Little to no heat when baking
• Oven not heating evenly

Removed 2 sheet metal screw pulled element out about 2 inches. Removed two Spade connections. Removed the element from the oven. Inserted the new element into the over, connected the two spade connector. Reinstalled the two sheet metal screws. Set the oven to bake for testing and tested until the element turned red. Total time less than 5 minutes. Read more

• Little to no heat when baking

The stove was a 40 year old drop in model so we had to turn off the breaker to the oven before getting started. We removed the baking racks then used a small drill bit to remove the old baking element making sure not to allow the wire to slip back into the back of the stove (very important). Installed the new baking element by slipping the wire connector onto the new element. Replaced the screws, restored power, tested the oven and voila it worked. Easy peasy. Read more

Unplugged the stove, unscrewed the mounting plates from the back unsnapped the wires then revered the procedure to install new one. Read more