Washer Knob, Dial & Button

Selector knob for washer control panels. Replace this part if your current knob is cracked, broken, loose, or missing from the control interface.

The Knob is an OEM component specifically designed for Whirlpool electric dryers. Located on the control panel, the knob allows for the selection of desired drying time, temperature, or fabric care settings. Its sturdy construction assists millions of adjustments over the appliance's lifespan.

Causes of a bad knob can include normal wear from continuous rotation breaking down grease on internal mechanisms. Over-tightening during installation may crack the plastic.

Symptoms of a bad knob include:

• Difficulty selecting options or inability to turn  
•  Knob slipping out of set position during drying  
• Loose, shifty, or jittery feeling during adjustment
• Cracked or broken casing tabs exposing internal parts

This OEM Whirlpool part is also compatible with KitchenAid, Maytag, Amana, Roper, Admiral, and some Kenmore dryers. 

Replacement control knob for dryer front panel. Restores grip and operation when original knob is cracked, worn, or missing. Fits onto control shaft for settings.

A replacement control knob assembly that restores safe, positive control of your appliance's settings. Replaces a cracked, stripped, loose, or missing knob so you can select functions and settings reliably. What it does:

• Provides a secure grip and smooth rotation for selecting temperature or function settings
• Replaces knobs that are cracked, worn, stripped, loose, or missing
• Restores proper control engagement when the original will not turn or won't stay set
• Matches OEM fit and mounting for a straightforward swap

• Always disconnect power to the appliance before starting any repair
• Most installations are push-on: remove the old knob by pulling straight off, then push the replacement onto the control shaft until fully seated
• If the knob is tight or stuck, gently wiggle while pulling; avoid prying on surrounding surfaces

A replacement control knob that restores reliable manual control of a dial or selector. Fits standard splined control shafts to make setting temperatures, cycles or power levels easy and intuitive. What it does

• Provides a secure grip and clear rotation for selecting settings on the appliance's control shaft
• Replaces cracked, worn or missing knobs that are hard to turn or won't stay in position
• Restores tactile feedback and alignment so settings register correctly with the control shaft
• Useful when original knob splines are stripped or the outer cap is damaged

• Typically installs by aligning splines and pushing firmly onto the control shaft until seated
• Power to the appliance should be turned off when removing and installing control parts
• Do not force the knob onto a shaft that does not match; verify spline match before installation
• If knob does not engage or control still fails, the underlying switch or shaft may need inspection

This cap is a small protective cover designed to fit over electrical terminals and exposed fittings to help keep dirt, moisture, and accidental contact away from sensitive components. It restores a finished appearance and basic protection. What it does:

• Covers and insulates exposed electrical terminals or connector ends to reduce short risk from accidental contact
• Helps keep moisture, dust, and debris off connections that can cause corrosion over time
• Maintains a secure fit over the terminal to prevent snagging or loose wiring
• Useful when replacing a damaged or missing terminal cover to restore proper protection

• Disconnect power to the appliance before working on electrical components
• Push the cap fully over the terminal until it seats; do not force or modify the part
• If wiring or terminals are corroded or damaged, replace or repair the wiring before installing the cap

Replacement delay button for your washer control panel. Installs on the front console to restore timer delay function. Needed when original is cracked or broken.

This smart button is a direct-replacement control panel push button that restores a responsive, reliable selector or touch input on affected appliances. It provides the tactile interface needed for selecting cycles, options, or menu items. What it does:

• Replaces a worn, cracked, or non-responsive control panel push button to restore input function
• Enables proper tactile feedback and reliable electrical contact for the console
• Commonly used when button presses fail to register or feel sticky/loose
• Helps resolve intermittent or unresponsive controls when the button itself is defective

• One smart button replacement

• Disconnect power to the appliance before attempting any repair to avoid shock or injury
• Access may require removal of the control panel; handle plastic parts gently to avoid damage
• Verify alignment and secure seating of the button on the switch or membrane before reassembly
• Further diagnosis of the switch, ribbon cable, or main control board may be required

Replacement timer knob assembly for washers. Installs on the control panel timer shaft. Needed when original knob is cracked, broken, or missing.

Replacement knob assembly that restores control and precise selection of settings on your appliance. Fits the original control shaft and provides a secure grip for adjusting temperature, cycle, or power settings. What it does

• Restores user control when the original knob is cracked, melted, stripped, loose, or missing.
• Provides a clear indicator/pointer for accurate selection of settings.
• Matches original fit and function to prevent slipping or uneven engagement with the control shaft.
• Helps resolve symptoms like a knob that won't turn, slips on the shaft, or has a broken pointer.

• Always disconnect power to the appliance before servicing; shut off gas supply for gas ranges.
• Typically installs without tools—remove the old knob by pulling it straight off, then press the new knob onto the control shaft.

Replacement timer control knob for washers. Restores manual cycle selection when original knob is cracked, broken, stripped, or missing. Installs on front panel.

Restore smooth, accurate control with this replacement control knob. It fits onto the selector or timer shaft so you can choose cycles, temperatures, or time and replace a cracked, stripped, loose, or missing knob.

• Attaches to the control shaft to operate a switch, timer, or thermostat
• Provides a secure grip for selecting cycle, temperature, speed, or time
• Resolves issues like free-spinning, slipping, or knobs that won't stay on
• Helps when settings can't be adjusted due to a damaged or missing knob

• Disconnect power before servicing to prevent accidental start
• Pull the old knob straight off; avoid twisting the control shaft
• Align the new knob with the shaft and press firmly until fully seated
• If your original knob had a removable insert/retainer, transfer it to the new knob