Blade

This genuine MTD shave plate, also known as a scraper bar, can be used as a replacement part for snowblowers. The shave plate is located at the bottom of the auger to scrape snow off of surfaces and filter it into the auger of the snowblower.Damage to the shave plate might include cracks, dents, and erosion to the metal material, or it can gradually wear out and no longer be effective. Evidence of a cracked shave plate can come from a visual inspection, but it can also be detected if the snowblower is doing a poor job of collecting and scraping snow off of surfaces. A cracked shave plate should be removed and replaced immediately, and a snowblower should not be used before the part is replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This shave plate is compatible with the following brands: MTD, Yard Machines, Cub Cadet, Yard Man, and Craftsman. Part sold individually.

The snow thrower shave plate is a metal scraper located at the bottom front of the auger housing that clears snow down to the pavement surface. Replace it when you notice uneven snow clearing, gouging of surfaces, or visible wear and chipping on the plate's edge.

A blade is the part of chippers and shredders that cuts the grass. It spins rapidly and pulls the grass up before cutting it. The grass is sucked into the deck, where the clippings continue to get chopped into smaller pieces before getting expelled. With regular use of the blade, after accidental damage, or because of the age of the machine, the blade may cease to perform adequately. Running the lawn equipment over rocks or other solid obstacles may also cause the blade to break. In any case, the blade has to be removed, and a new blade should be installed. Wear gloves for protection and handle the blade with caution. Make sure the machine is cooled entirely before beginning the repair.This blade is a genuine OEM part sourced directly from the manufacturer. It is made of durable, high-quality metal. The blade is sold as an individual unit. The replacement part is compatible with MTD, Troy-Bilt, Yard Machines, and Huskee brand lawn and garden machines, including chippers and shredders.

Complete 46-inch mulching blade kit for lawn tractors. Includes blades designed to finely chop grass clippings. Replace worn or damaged blades.

This is a 42-inch 3-in-1 cutting blade for a riding lawn mower. It is designed to mulch, bag, or side-discharge grass clippings depending on your mowing setup. Replace this blade if it is dull, bent, nicked, or no longer cutting grass cleanly, which can leave an uneven cut and put extra strain on the mower's engine.

Left hand inner tines assembly for tillers. Installs next to outer tines on the left side. Replace if tines are worn, bent, or broken from soil cultivation work.

Outer tine assembly for tillers, left-hand configuration. Installs on tine shaft for soil cultivation. Replace if bent, cracked, or worn from impact.

This 25mm drive pulley serves as a blade adapter that connects the cutting blade to the drive shaft of a lawn mower. It ensures the blade is securely mounted and spins properly during operation. Replace this adapter if the blade wobbles, does not seat correctly on the shaft, or if the adapter keyway or mounting hole is worn or damaged.

Replacement screen blade for chipper shredders. Installs in the shredding chamber to cut debris. Replace if cracked, bent, or worn for proper chipping.

Left-hand bolo tine blade for tillers. Attaches to the tine holder to dig and cultivate soil. Replace if bent, broken, or worn for proper tilling.

Metal blade adapter with 25mm inner diameter connects mower blade to spindle. Replace if worn, split, or pins have broken off for proper blade mounting.

The blade adapter kit is a genuine replacement for select walk-behind lawn mower models. The kit includes the blade adapter, hex cap screw, and bell blade support. Together, these components allow the blade to be seated securely under the mower deck and rotate to cut the grass. These parts are exposed to constant vibrations and may come into contact with the ground or other debris, which can lead to damage or wear over time. In the event that they fail, the blade will not securely attach to the mower and it will be unsafe to use until the hardware is replaced. This OEM kit can deliver the parts needed for the job. This genuine blade adapter kit is manufactured by MTD and is compatible with hundreds machines from this brand, as well as those from Troy-Bilt, Yard Machines, Yard Man, and Bolens. While replacing the adapter kit, it is a good idea to clean and sharpen the blade and clean under the mower deck. Always disconnect the spark plug and wear gloves for safety when working on the mower deck or engine parts.

Replacement edger blade for crisp lawn edges along driveways and sidewalks. Replace when dull, chipped, or worn from frequent use for clean results.

17.90-inch high-lift mower blade for lawn tractors and riding mowers. Replace worn, bent, or dull blades to restore cut quality and deck performance.

Replace your worn, cracked, or damaged 21.20-inch high lift mower blade. This structural cutting component installs under the deck on select lawn tractors.