Cooktop Glass Top Or Cook Top

The Cooktop is an OEM replacement part for Whirlpool cooktops. It acts as the durable and heat-resistant platform where you place your pots, pans, and cookware for cooking. This assembly includes the glass panel itself, which provides the cooking surface for the range, and other elements such as the metal frame or trim that surrounds the glass.

A bad glass main top can occur due to accidental damage, thermal shock, or general wear and tear. If you notice symptoms such as cracks, chips, or an uneven cooking surface, it may be time to replace the glass main top.

Symptoms of a bad cooktop include:

• Cracks or chips on the surface
• Uneven cooking temperature
• Difficulty in cleaning spills or stains

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This replacement part is a main top assembly that has been manufactured by Frigidaire and is compatible with ranges. The main top assembly provides a stable and safe surface on which to balance cookware. This part is subject to wear and tear, which could cause cracking, denting, warping, chipping, or other defects, requiring it to be replaced. Make sure the appliance is unplugged and allow it to completely cool down before starting. It may take two people to replace this part as it can be heavy. Wear work gloves for safety.This is a genuine OEM part that has been sourced directly from the manufacturer. It is compatible with different ranges manufactured by Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, and other brands. This part is only sold individually.

This cooktop is the range's upper surface panel that supports and aligns the surface burners while protecting the chassis from spills. Replacing a damaged top restores safe burner seating and a clean, finished appearance.

• Forms the sealed, easy-to-clean stovetop surface and shields wiring/insulation below
• Provides a rigid mounting platform for burners/igniters so heat is centered over cookware
• Helps contain spills to prevent leaks into the cabinet
• Typical signs: dents, chips or cracks; severe staining/rust; warped panel; misaligned or wobbly burner assemblies; sharp edges

• Disconnect power; shut off the gas supply before starting
• Remove grates/knobs/burner caps and mounting screws; lift off the old top carefully
• Transfer burner bases, igniters, and any gaskets as required by your model; handle edges with cut-resistant gloves
• Reassemble and test; for gas models, perform a leak check with an approved solution

This is the replacement cooktop, also called the main top, for sealed-burner gas units. It forms the cooking surface around the burners to contain spills, restore appearance, and keep grates and burner parts seated securely for safe, even heating.

• Forms the main cooking surface and supports burner heads/caps and grates
• Sealed-burner design helps keep spills on top, protecting components below
• Maintains proper burner alignment and flame pattern
• Common symptoms: cracks, chips, dents, rust, or warping; wobbly grates or gaps around burner openings

• Disconnect power and shut off the gas supply before servicing
• Remove grates, burner caps, and the screws securing burner heads; lift off the old top
• Transfer/reconnect igniters and wiring as equipped; avoid pinching wires during reassembly
• Restore gas and power, verify ignition on all burners, and check for leaks

Color: Black

This is the smooth ceramic glass cooktop surface. It provides the cooking surface for the range, supporting the radiant elements and offering a durable, easy-to-clean top.

• Forms the flat cooking surface above the radiant elements
• Damage can cause cracks, chips, or hot spots on burners
• Replacing helps restore safe, even heating and a clean appearance
• Use care: glass can shatter if struck or overtightened during install

• Disconnect power before servicing; glass edges are sharp
• Remove control knobs and lift/transfer any brackets per IPL
• Handle glass with two hands; avoid flexing or setting face-down on hard surfaces
• Reuse original screws/brackets and gasket if service manual specifies; align carefully to avoid stress cracks

Black

This replacement cooktop surface panel forms the appliance's upper cooking surface. It restores a smooth, level top, protects internal components from spills, and ensures correct alignment of the surface components for safe, reliable everyday use.

• Forms the cooking surface and covers the chassis beneath
• Provides openings/mounting points for surface components
• Common failure signs: cracks, chips, dents, rust, or finish damage that won't clean
• Warping or broken mounting points causing components not to sit flat or secure

• Disconnect power; for gas models also shut off the gas supply
• Wear cut-resistant gloves; handle carefully to avoid bending, chipping, or scratching
• Transfer surface components (e.g., burners/elements, bezels, gaskets, screws) from the old panel as directed by your model's service information
• After reassembly, restore power and, for gas units, check connections for leaks before use

This cooktop is the appliance's main top surface. It restores a safe, level, easy-to-clean work area when the original top is damaged, helping your range or cooktop look and function as intended.

• Provides the upper surface that supports and aligns burners or heating elements
• Helps contain spills and protects internal components from moisture and debris
• Restores proper fit, finish, and stability when the original top is cracked or warped
• Typical replacement symptoms: visible cracks, chips, stains that won't clean, or broken mounting points

• Disconnect power at the breaker; shut off gas supply before servicing
• Handle carefully; edges and surfaces can be fragile—use gloves and a protective surface
• Transfer any components from the original top to the new part, noting positions and wire routing as applicable
• Test operation before returning to service

Color: Black

This Main top is the oven's upper cabinet panel that provides the flat surface and structural support for the cooktop area, restoring proper fit and appearance. It replaces a bent, damaged, or corroded top to help the range sit and seal correctly. What it does:

• Replaces the damaged or warped top panel that supports the cooktop and front controls
• Restores a flat, even surface to prevent gaps and improve alignment with adjoining panels
• Helps prevent heat and moisture from reaching internal components through damaged metal
• Commonly replaced when the top shows dents, rust, or mounting-point damage

• One Main top (upper cabinet panel) as shown

• Basic disassembly of the cooktop and control panel is typically required; disconnect power before starting
• Handle edges carefully; metal panels can be sharp
• Keep hardware organized for reassembly; reuse original screws and brackets unless damaged

Replacement cooktop surface assembly that restores the top of the range for safe, even cooking and a finished appearance. Use this part to replace cracked, warped, or cosmetically damaged cooktop tops. What it does:

• Replaces the cooktop surface so burners and grates seat correctly and cookware sits level.
• Protects internal components from spills, debris, and heat exposure.
• Stops visible cracks, chips, or warping that can cause smoke or poor burner contact.
• Restores the appliance's finished look and makes cleaning easier.

• Disconnect power (and shut off gas for gas ranges) before starting any work.
• Remove grates, burners, and knobs as needed; handle the surface carefully to avoid cuts or additional breakage.
• Some installations require two people due to size and weight—use proper lifting techniques.
• Follow the manufacturer's installation instructions.

This steel-and-glass maintop is the upper cooking surface that supports burners and cookware while providing a finished appearance. Replaces a damaged or worn maintop to restore safe, level support and proper burner alignment. What it does:

• Provides the main cooking surface and mounting points for burners and grates
• Restores a flat, heat-resistant surface for pots and pans
• Helps prevent burners from shifting or tilting during use
• Improves appearance by replacing cracked, dented, or warped tops

• Verify power is disconnected and range is cool before starting work
• Use proper tools to remove burner grates, trim pieces, and mounting screws
• Handle glass surfaces carefully to avoid chipping; support the top during removal and installation

The Range Cooktop Frame Assembly is designed to provide a sturdy and reliable foundation for your range's cooktop. This genuine OEM part ensures a perfect fit with your Samsung range, maintaining the integrity and performance of your appliance. Crafted from high-quality materials, the assembly frame offers durability and long-lasting support, helping to keep your cooktop securely in place. Installing this frame assembly can restore the original stability of your range, preventing any wobbling or shifting during use. With easy installation, you can quickly enhance the functionality of your appliance without the need for professional assistance. Choosing the Range Cooktop Frame Assembly guarantees that you are using a component specifically made for Samsung ranges, ensuring compatibility and reliability for everyday cooking needs. Improve your kitchen experience by replacing a damaged or worn frame with this essential genuine OEM part.

Color: Black

The Cooktop (black) is an OEM replacement part for Whirlpool cooktops. It is the main cooking surface where burners or heating elements are located. The cooktop is designed to withstand high temperatures and provide a durable, easy-to-clean surface for your cooking needs.

Symptoms of a bad Cooktop include:

• Visible cracks, chips, or damage to the cooktop surface
• Uneven heating or hot spots on the cooking surface
• Discoloration or warping of the cooktop material
•  Difficulty in cleaning or maintaining the cooktop

Causes of a bad cooktop can range from physical damage due to impact or improper use, to excessive heat exposure or thermal shock. Over time, repeated heating and cooling cycles can also lead to the degradation of the cooktop material or its surface finish.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ranges and cooktops.