Door Stop Or Cam Riser

Internal cam that assists with smooth, secure refrigerator door closing. Replace if worn, cracked, or broken to restore proper door operation.

Mounts to the bottom hinge to limit door swing angle. Replace if your refrigerator door opens too far, hits the wall, or the bracket is bent or broken.

Replaces worn or broken refrigerator door closer cam that installs at the bottom hinge. Restores smooth door action when the original is cracked or damaged.

Supports the freezer door on the hinge pin for smooth opening and alignment. Replace if worn, cracked, or missing to stop door sagging or scraping.

Hinge component that guides the cam for self-closing door action. Replace if cracked, broken, or worn to restore smooth door swing and proper alignment.

Mounts at the bottom hinge to raise and lower the refrigerator door as it swings. Replace if cracked, worn, or broken to restore smooth self-closing.

Limits refrigerator door swing to prevent overextension and protect hinges. Replace if cracked, broken, or missing to restore controlled door movement.

Plastic cam hinge riser that supports and aligns refrigerator door hinges. Replace when cracked, broken, or causing door misalignment or loose fit.

Cam coupler links hinge components controlling refrigerator door movement. Replace if worn, cracked, or broken to restore smooth opening and proper alignment.

Limits refrigerator door travel to prevent over-rotation and protect hinges. Replace this plastic stop if cracked, broken, or missing to maintain alignment.

Rotating cam mechanism that mounts inside the refrigerator door to gently pull it closed. Replace if cracked, broken, or worn causing poor door closure.

White door stop that limits how far your refrigerator door swings open. Replace if broken, cracked, or missing to prevent door overextension and damage.

Grey left-hand door closer cam for bottom-mount refrigerators. Replaces broken or worn door closers that prevent proper door alignment and sealing.

Door auto-closer hook mounts at the refrigerator hinge and engages the cam mechanism to help pull the door shut. Replace if worn, broken, or missing.

This door hinge supports and pivots the appliance door for smooth, aligned opening and closing. Replacing a worn hinge restores proper closing and helps the latch and door seal make consistent contact. What it does:

• Provides the pivot point and structural support for the door
• Maintains door alignment for correct latch engagement and seal contact
• Helps prevent binding, sagging, uneven movement, and squeaks
• Common fix for doors that won't close fully or feel loose/wobbly
• Replaces hinges that are bent, cracked, or show excessive play

• 1 door hinge

• Disconnect power (and shut off gas/water if applicable) before servicing
• Support the door to prevent strain; removal may be required to access the hinge
• Remove hinge cover/trim and mounting screws; transfer any hardware to the new hinge
• After installation, verify alignment and closure; adjust as needed for proper latch and seal contact

This cam door replaces the small plastic cam that guides and supports the appliance door mechanism, restoring proper door alignment and secure closing so the appliance can latch and operate reliably. What it does:

• Guides the door or door strike into the correct position during closing
• Helps the latch engage so the appliance recognizes the door as closed
• Replaces worn, cracked, or broken cams that cause misalignment or noisy operation
• Can stop symptoms such as a door that won't seat, rattles when closing, or prevents the appliance from starting

• One cam door (single replacement cam)

• Disconnect power (and water if applicable) before starting any repair
• Remove the door or access panel per your model's service instructions to reach the cam
• Verify cam orientation and engagement with the latch/strike before final assembly