Frigidaire Handle

This replacement door handle restores a solid, comfortable grip for opening and closing your refrigerator door and refreshes the appliance's appearance when the original handle is cracked, loose, or missing.

• Provides the handhold to open and close the refrigerator door
• Mounts to the outer door using existing factory hardware
• Helps resolve a cracked, broken, loose, or missing handle
• Improves door control and overall appearance

• Disconnect power before servicing and protect the door surface from scratches
• Note handle orientation; transfer/reuse existing mounting hardware if applicable
• Align with mounting points; start fasteners by hand and tighten evenly without overtightening
• The handle is secure and the door opens and closes smoothly

This is the stainless steel oven door handle. It lets you safely open and close the oven door and restores a secure, finished look when the original handle is broken, loose, or missing.

• Provides a sturdy grip to operate the oven door
• Helps ensure the door opens/closes smoothly
• Common failure signs: loose handle, broken end caps/mounts, missing or damaged handle
• Cosmetic refresh for a worn or scratched handle

• Disconnect power and allow the oven to cool completely before servicing
• Remove interior door screws to access the handle mounts
• Support the door glass to prevent stress while removing/installing hardware
• Reuse existing screws and trim/end caps or replace them if worn or damaged

This replacement door handle restores a sturdy, comfortable grip on your refrigerator door. It replaces cracked or loose handles so you can open and close the door safely while keeping the appliance's appearance clean and finished.

• Provides the leverage and grip needed to open and close the door
• Restores appearance when the original handle is worn, discolored, or broken
• Helps prevent stress on the door gasket by giving a proper grab point
• Common signs of failure: handle is cracked, loose, wobbly, or missing

• Disconnect power before servicing; turn off water supply if working near a dispenser line
• Open the door and remove any decorative end caps to access the mounting screws
• Support the handle, remove screws, position the new handle, and reinstall using existing hardware; do not overtighten
• The handle is secure and the door opens and closes smoothly

The Refrigerator Handle is an OEM part for Frigidaire side-by-side refrigerators. It provides a grip point to easily open and access fridge and freezer compartments. The handle must withstand constant use without breaking or losing functionality. 

Symptoms of a bad refrigerator handle include:

• Difficulty opening the refrigerator door  
• Loose, jagged, or unstable handle grip that poses a safety risk
• Cracks, chips or damaged plastic compromising structural integrity

Causes can be wear over years of heavy usage, exposure to heat or cleaning chemicals accelerating degradation, or physical impact resulting in breaks.

This OEM Frigidaire replacement handle is also compatible with some Electrolux, Crosley, and Amana refrigerator models.

Color: White. Includes the chrome band and snap lock clips.

This handle assembly replaces a broken, cracked, or missing refrigerator door handle so the door opens and closes securely and looks finished. Durable molded construction matches the original fit and lever action. What it does:

• Provides the gripping surface and mounting points to open and close the refrigerator door
• Restores proper door control when the original handle is cracked, loose, or detached
• Keeps the door aligned with its latch area for smooth operation
• Prevents hand contact with damaged edges and improves cabinet appearance

• Unplug the appliance or switch off power before beginning work to avoid injury
• Remove any trim or screws holding the old handle; keep fasteners if they are undamaged and listed for reuse
• Align the new handle with the mounting bosses and fasten securely without over-tightening to avoid cracking the plastic
• If the handle uses hidden clips or adhesive trim, verify clip engagement and door operation before finishing

This door handle assembly provides a ready-to-install replacement to restore a secure, easy-grip opening for your refrigerator door. Durable construction replaces a worn or broken handle for reliable daily use. What it does:

• Replaces a cracked, loose, or broken refrigerator door handle to restore safe operation and appearance
• Provides a solid grip for opening and closing the door smoothly
• Matches factory mounting points for proper fit and alignment
• Helps prevent door damage and keeps the seal functioning by ensuring correct door movement

• Disconnect power to the appliance before beginning any repair to avoid injury
• Remove any trim or access panels as needed to access mounting screws; retain fasteners for reassembly
• Hand-tighten screws, then snug—do not overtighten to avoid cracking the handle or trim

This door trim handle is the exterior trim piece that covers and finishes the refrigerator door handle area, restoring appearance and protecting mounting hardware. It gives a clean, finished look when the original trim is cracked, loose, or missing. What it does:

• Covers handle mounting points and hides screws for a finished door appearance
• Restores a secure feel when the original trim is cracked, split, or broken
• Prevents dirt buildup around the handle mounting area
• Helps maintain proper clearance and alignment of the exterior handle

• One trim handle piece as shown

• High-level snap-on or screw-on replacement; remove any old broken trim before installing
• Use basic hand tools; avoid overtightening fasteners to prevent cracking
• If trim attaches near sealed door components, handle gently to avoid damaging the door finish or gasket
• For safety, disconnect power only if instructed by the manufacturer for your model

This short half-moon handle provides a compact, ergonomic grip to open and close a refrigerator or freezer drawer or door. It replaces a worn, cracked or broken short half-moon style handle to restore safe, reliable operation. What it does:

• Replaces a damaged or missing short half-moon style handle used on select appliance doors or drawers
• Restores a secure grip so panels open and close smoothly
• Prevents sharp edges or loose hardware that can catch clothing or skin
• Fits applications that use the short half-moon shape and mounting pattern

• Use basic hand tools; avoid overtightening fasteners to prevent cracking
• Disconnect power and follow appliance safety guidelines

This replacement door handle restores a damaged or worn refrigerator door grip so the door opens and closes smoothly and looks finished. It matches OEM fit and styling for direct swap replacements. What it does:

• Provides a secure gripping surface for opening and closing the refrigerator door
• Replaces cracked, loose, or cosmetically damaged handles
• Restores proper door operation when original handle interferes with sealing or use
• Matches original mounting locations for a direct replacement

• Disconnect power to the appliance or unplug the refrigerator before beginning work.
• Remove any trim or access covers to expose handle fasteners; keep small parts organized.
• Use appropriate hand tools; avoid over-tightening fasteners to prevent cracking the handle.