Frigidaire Wire, Harness, Power Cord

This wiring harness connects the appliance's control board or power source to internal components, restoring electrical continuity for reliable operation. Replace a damaged harness to stop intermittent power or non-responsive functions. What it does

• Routes power and signals between the control and components so controls, switches and motors operate correctly.
• Common symptom: controls or display are unresponsive or intermittent.
• Common symptom: specific functions (motors, lights, heating elements) do not receive power.
• Helps prevent shorts and arcing when routing and insulation are intact.

• One wiring harness as pictured and specified by the manufacturer.

• Disconnect power (unplug or shut off breaker) before accessing internal wiring.
• Verify connector orientation and seating; match wire colors and terminal positions during reassembly.
• Replace only the harnesses explicitly listed for your exact model to avoid mis-wiring.
• If you see burned terminals or damaged connectors, inspect adjacent components and replace as needed.

This Box & Wires Assembly replaces the fridge's boxed electrical junction and pre-wired harness to restore reliable power routing between components. It keeps internal wiring organized and protected for safe appliance operation. What it does:

• Provides a sealed junction box and factory-wired harness to connect multiple refrigerator components
• Routes power and signals so lights, controls, and accessories receive electrical feed
• Replaces damaged or burned wiring that can cause intermittent or complete loss of function
• Helps prevent exposed wires and loose connections that increase risk of shorts

• One box and pre-wired harness assembly as shown

• Disconnect power to the appliance before beginning any work
• Match wire colors and connector types to the original assembly; secure wiring and fasteners per OEM routing
• Do not splice or modify the harness; improper wiring can cause damage or safety hazards

This replacement power line cord restores safe electrical connection to the appliance so it powers up reliably. It replaces a damaged or worn cord to eliminate intermittent power, burning smells, or visible frays. What it does:

• Delivers mains power from the outlet to the appliance so controls and motors operate
• Replaces frayed, cut, burned or intermittently-working cords that cause power loss
• Stops arcing or burning smells caused by damaged insulation or connections
• Restores a secure connection when the original cord or strain relief is broken

• Disconnect appliance from power before inspecting or replacing the cord; follow all local electrical codes
• Route the cord through the original strain relief and secure it to prevent tugging on terminals
• Tighten terminal screws firmly and ensure wire colors match original terminal layout

The Power Cord is an OEM replacement part for Frigidaire window air conditioners. Extending from the rear of the AC unit, the durable cord safely transmits electricity from the wall outlet to internal components like the compressor and fan motor. Constructed with insulation, strain relief connectors, and protective cable jacketing, the cord undergoes constant flexing during seasonal use and storage.

Symptoms of a bad power cord include:

• The air conditioner failing to turn on or function 
• Frayed, cracked, or exposed inner wiring
• Tripping the circuit breaker upon startup
• An electrical burning smell coming from the cord area

Causes can involve repeated bending over time weakening internal wires, cracks in the outer jacket allowing moisture intrusion, or animal/insect damage interfering with current flow. 

Replacing this Frigidaire OEM cord prevents hazards while restoring dependable cooling performance. Compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This Mullion harness routes electrical connections through the refrigerator door mullion so lights, sensors and control/LED assemblies communicate with the main cabinet wiring. It restores reliable power and signal routing in the door center strip. What it does:

• Carries power and signal between the door/mullion components and the main harness
• Restores non-functioning mullion lights, LEDs or control communication caused by a damaged harness
• Prevents intermittent connections from frayed or broken mullion wiring
• Used when visible wire damage or connector failure is found in the mullion area

• One (1) mullion harness as pictured

• Disconnect power to the appliance before starting work to avoid shock or injury
• Remove the mullion/door trim and any gaskets per service instructions to access the harness
• Inspect connectors and wire routing; replace any clips or retainers to prevent pinching

This replacement power cord restores the electrical connection for compatible Frigidaire appliances so they can safely receive power. Durable insulation and molded ends help ensure a secure, reliable feed to the appliance. What it does

• Provides the main AC power connection between the appliance and the household outlet.
• Replaces damaged, frayed, or burned cords that can cause power loss or unsafe conditions.
• Common symptom: appliance does not power on or loses power intermittently.
• Common symptom: visible cord damage, exposed wires, melting, or frequent tripping of a circuit breaker.

• Always disconnect the appliance from power at the breaker or unplug before installing.
• Inspect the cord routing and strain relief; replace any damaged clamps or covers.
• Tighten terminal connections securely; avoid over-torquing which can damage terminals.

This wiring harness routes power and signals between the appliance's control and electrical components so controls, igniters, sensors or motors receive the correct connections. It replaces a worn or damaged factory harness to restore proper electrical routing. What it does:

• Provides the factory-style wiring connections between control boards, switches, sensors and actuators
• Restores lost or intermittent electrical connections that can cause controls or components to stop working
• Helps resolve symptoms such as intermittent power to components, no response from controls, or certain functions not activating
• Matches OEM connector types and wire lengths

• One replacement wiring harness

• Disconnect power to the appliance before starting work to avoid shock or injury
• Compare the replacement harness to the original for connector type, pin count and wire routing before installing
• Route and secure the harness away from heat sources and moving parts; use existing clips or ties where provided

This dispenser wiring harness connects the dispenser controls and components in the refrigerator door, restoring electrical continuity for the dispenser functions and simplifying replacement of a damaged or faulty harness. What it does:

• Carries power and signals between the dispenser switches, valve/solenoid, and indicator lights
• Replaces frayed, pinched, or damaged wiring that can cause intermittent or no dispenser operation
• Addresses symptoms like non-working water/ice dispenser, no dispenser lights, or unresponsive dispenser switches
• Provides factory-style connectors for a direct, plug-and-play replacement

• One dispenser wiring harness

• Disconnect power to the appliance before beginning any work to avoid shock
• Remove the inner door panel or dispenser bezel per your model's service instructions to access the harness
• Match connectors and routing to the original harness; avoid stretching or pinching wires when reinstalling
• Test dispenser functions after installation and reassemble panels securely