General Electric Spray Arm & Related

The Lower Spray Arm Base is an OEM part for GE dishwashers. Located inside the dishwasher tub, this part attaches securely to hold and rotate the lower spray arm during wash cycles. The spray arm works together with the rotating base to provide thorough lower rack coverage with water and dishwasher detergent.

Symptoms of a bad lower spray arm base include:

• Inadequate cleaning of lower rack dishes
• Dirt or food particles left behind after cycles
• Loose or detached lower spray arm

Causes of a bad lower spray arm base can be wear over many cycles of use. Damage may occur from impact with dishes or utensils loaded incorrectly. Regular mineral buildup on the connectors also reduces efficient spinning.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Fine Filter Hub Nut is an OEM part for GE dishwashers. It secures the fine filter in place, ensuring that debris and food particles are effectively filtered out during the wash cycle, preventing them from re-entering the dishwasher tub.

Causes of a bad fine filter hub nut can include wear and tear from regular use, damage from over-tightening, or cracking due to impact. A faulty hub nut can lead to improper filtration, causing debris to circulate and potentially clog the dishwasher.

Symptoms of a bad Fine Filter Hub Nut include:

• Poor cleaning results with food particles left on dishes
• Unusual noises during the wash cycle
• The filter becoming loose or not staying in place

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Spray Arm is an OEM part for GE dishwashers, meticulously crafted to provide a direct replacement for the original component. This part is essential for ensuring that water is evenly distributed throughout the dishwasher during a cycle, reaching all dishes to effectively remove food debris and stains. The lower spray arm rotates and sprays water with precision, making it a critical element in achieving optimal cleaning performance.

Causes for these issues often stem from regular use, such as the accumulation of hard water minerals leading to clogs, or physical damage from improper loading of dishes. Ensuring that the Lower Spray Arm is in good condition and free from obstructions is vital for maintaining the dishwasher's efficiency and cleaning effectiveness.

Symptoms of a faulty Lower Spray Arm include:

• Dishes remaining dirty or having spots after a wash cycle
• Water not spraying evenly or with sufficient force
• The spray arm becoming clogged, cracked, or broken

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Upper Spray Assembly is an OEM part for GE dishwashers. It is a part located at the top of the dishwasher, designed to distribute water evenly over the dishes during a wash cycle. This part ensures that water reaches all items in the dishwasher, regardless of their placement, facilitating thorough cleaning and rinsing. 

Causes of a bad part can include wear and tear from regular use, hard water mineral buildup leading to clogging, or direct damage to the assembly or its outlets.

Symptoms of a bad Upper Spray Assembly include:

• Dishes in the upper rack not being cleaned properly.
• Water not spraying evenly or forcefully from the upper spray arms.
• Noise or rattling sounds from a damaged or obstructed spray arm during a cycle.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Center Wash Arm Assembly is an OEM component specifically designed for GE dishwashers. It is the main wash arm responsible for spraying water across the center rack area during cycles to effectively clean dishes. The wash arm measures approximately 3/4” H x 2 ¾” W x 19” D.

Causes of a bad center wash arm assembly can include clogs from food particles or hard water deposits, damage from dishware, or wear and tear from frequent use. A malfunctioning wash arm can lead to poor cleaning performance and spots or residue on dishes.

Symptoms of a bad center wash arm assembly include:

• Dishes not being cleaned properly
• Water not spraying or rotating as expected
• Unusual noises during the wash cycle
• Visible cracks or damage to the wash arm

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Spray Arm is an OEM part for GE dishwashers. It is located at the bottom of the dishwasher. The spray arm uses a series of small nozzles and openings to produce targeted sprays that assist in loosening and washing away food debris.

Causes of a bad lower spray arm include clogs or mineral buildup inside the spray nozzles over time, or damage such as bending of the arm that affects water pressure and spray patterns.

Symptoms of a bad Lower Spray Arm include:

• Ineffective cleaning and rinsing at the bottom rack of dishes
• Standing water or poor drainage from the dishwasher tub
• Visible defects like cracks or gaps in the spray arm material

This genuine GE replacement part is also compatible with Hotpoint, RCA, and select Kenmore models.

The Spray Arm Assembly is an OEM part for GE dishwashers. This component is located at the bottom of the dishwasher and is responsible for distributing water to clean the dishes during the wash cycle. It rotates to ensure that water reaches all areas within the dishwasher, providing thorough cleaning of the dishes.

Causes of a bad spray arm assembly can include clogging due to food particles or debris, wear and tear from regular use, or damage from improper loading of items. Such issues can obstruct water flow or prevent the spray arm from rotating effectively, leading to suboptimal cleaning performance.

Symptoms of a bad spray arm assembly include:

• Dishes not being cleaned properly
• Inconsistent water spray patterns
• Noisy operation during the wash cycle
• The spray arm not rotating or moving smoothly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Spray Arm is an OEM component compatible with GE dishwashers.The spray arm is responsible for distributing water throughout the dishwasher and cleaning dishes.

Causes involve mineral buildup obstructing water flow over time, or flexible arm components cracking under pressure.

Symptoms of a faulty lower spray arm include:

• Poor cleaning
• Slow or uneven spinning rotation during wash cycles
• Accumulation of food debris under the arm
• Leaking due to incorrect water distribution

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models

The Lower Spray Arm Assembly is an OEM part for GE dishwashers. This part is responsible for spraying water and detergent onto the lower rack of dishes during the wash cycle.

Causes of a bad Lower Spray Arm Assembly can include mineral buildup or debris clogging the spray holes, physical damage from impact or foreign objects, or wear and tear over time.

Symptoms of a faulty Lower Spray Arm Assembly include:

• Incomplete or ineffective washing of dishes on the lower rack
• Water not spraying evenly or not spraying at all from the lower arm
• Clogged or blocked spray holes
• Loud noises or grinding sounds during the wash cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This middle spray arm hub secures the dishwasher's middle spray arm to the feed tube and lets it spin smoothly, helping deliver even spray coverage so dishes in the upper rack area get properly cleaned.

• Connects the middle spray arm to the water feed/manifold and serves as its rotating center
• Keeps the arm aligned so jets can distribute water evenly
• Wear or cracks can cause the arm to wobble, fall off, bind, or stop spinning
• Symptoms include poor cleaning on the upper rack and unusual noise from the arm area

• Disconnect power and water supply before servicing
• Remove the middle spray arm per your model's design and note its orientation
• Transfer and reuse any original screws, clips, or washers; install the new hub without overtightening
• Spin the arm by hand to ensure free movement before running a brief test cycle

This replacement part is a lower arm spray, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. The lower arm sprays are an important part of the cleaning process in many dishwashers. This spray arm is situated underneath the top dish rack and projects water downward for more sufficient cleaning.A new lower spray arm might be needed if the user notices the current one is failing to spin or expel water. If dishes are coming out of the dishwasher and are only partially cleaned, then it might be time for a new arm spray. Be sure the water is completely turned off from the appliance before attempting to repair this part. Refer to the user guide for more specific directions on how to replace the lower arm spray. This lower arm spray is sold individually and is sourced directly from the manufacturer. This dispenser is a genuine OEM part.

This 3rd level spray arm assembly restores targeted wash action from the top of the tub, improving coverage to the upper rack. Replace it if jets are clogged, the arm is damaged, or upper-rack cleaning performance has declined.

• Directs wash water from above to reach items on the upper rack and hard-to-hit areas
• Helps ensure even spray coverage when functioning properly
• Common symptoms of failure: upper-rack dishes still dirty, weak spray from the ceiling area, visible cracks or mineral buildup, rattling during cycles
• Restores intended water distribution for consistent cleaning results

• Disconnect power and turn off the water supply before servicing
• Open the door; remove the upper rack if needed for access
• Release the mounting clip/retainer or screw, remove the old assembly, and seat the new one until fully secured
• Ensure proper clearance/orientation; run a short test cycle to confirm spray and operation

This mid-spray conduit routes wash water from the circulation system to the middle spray arm, delivering consistent coverage to the center rack. Replacing a cracked or clogged conduit can restore washing performance and help prevent leaks inside the tub.

• Directs wash water from the pump to the mid-level spray arm
• Maintains proper flow for the middle wash zone and spray arm rotation
• A damaged or obstructed conduit can cause poor cleaning on upper racks or weak/erratic spray
• Cracks, broken tabs, or loose sealing can lead to leaks from the rear of the tub

• Disconnect power and water; wear gloves to protect hands
• Remove rack(s) as needed, release rear-wall fasteners/clips, and detach the conduit from its connections
• Align and fully seat the new conduit at all docking points until tabs lock securely
• Run a short test cycle to check for leaks and proper spray operation

This ring nut with gasket secures and seals a dishwasher connection point. If the nut cracks or the gasket hardens, leaks can develop—replace this part to restore a tight, reliable, watertight seal.

• Creates a watertight seal at a threaded dishwasher connection
• Secures the fitting/component so it stays tight during operation
• Helps correct leaks caused by a cracked nut or worn/flattened gasket
• Replace if the connection drips, the nut is stripped, or the gasket is brittle

• Disconnect power and turn off the water supply before servicing
• Place a towel or shallow pan to catch residual water
• Seat the gasket evenly and start the nut by hand to avoid cross-threading
• Snug the nut—do not overtighten. Run a short cycle and check for leaks

Color: white. It measures about 20 inches wide by 14 inches high when fully extended.

This guide casing helps support and align the appliance's moving components so they run smoothly and reduce wear. Replacing a worn guide casing restores proper fit and can help stop rubbing or uneven movement. What it does:

• Centers and supports the moving assembly to maintain correct alignment
• Reduces rubbing, squeaks, or grinding caused by worn or damaged guides
• Helps prevent premature wear on adjacent parts by keeping components on track
• Restores proper movement when the original casing is cracked, warped, or broken

• One guide casing

• Turn off power to the appliance before starting any repair to avoid shock or injury
• Inspect surrounding parts (fasteners, clips, bearings) and replace if damaged
• Use basic hand tools; handle the casing carefully to avoid breaking plastic tabs