Kenmore / Sears Control Board

This power control board assembly regulates power and control signals for the appliance, restoring reliable electronic control and normal operation when the original board fails. It replaces a faulty main control to stop intermittent power or unresponsive controls. What it does:

• Supplies and distributes power to the appliance's control circuits
• Controls user interface and command processing for cycles and functions
• Can cause no-power, intermittent power, or failure to respond when faulty
• May trigger control-related error codes or unexpected shutdowns

• Disconnect all power before starting—risk of electric shock
• Handle the board by edges and avoid static discharge; use ESD protection
• Transfer connectors and any attached harnesses exactly as removed
• Test appliance operation and all functions after installation;

This mechanical cycle timer controls the sequence and duration of washer operations. Replacing a failing timer restores proper advancement through fill, agitate, drain, and spin so cycles complete reliably with accurate timing. What it does:

• Advances the washer through each step by routing power to the water valves, motor, and drain pump at the correct times
• Sets the length of each stage for consistent operation
• Common failure signs: cycle won't advance or stops mid-cycle
• Timer knob doesn't move or must be jiggled to run
• Skips functions (no agitate, drain, or spin) while others still work

• 1 mechanical timer assembly

• Disconnect power before servicing; access the timer from the control console
• Take photos or label wires; transfer them to the new timer one at a time to maintain correct positions
• Reuse the existing knob and dial; align the timer shaft properly and secure the mounting screws
• After reassembly, run a short test cycle to ensure proper advancement

This electronic control is the refrigerator's main control board that manages temperature, user display, and timed functions to restore reliable operation. Replaces a failed control to return the unit to normal cycle and user control. What it does:

• Regulates compressor, fans, and defrost cycles based on sensor inputs
• Powers and responds to the front control/display panel for temperature and mode settings
• Controls timed functions such as automatic defrost and ice maker cycles
• Resolves symptoms like unresponsive controls, incorrect temperatures, or intermittent cooling behaviors

• One electronic control (main control board)

• Disconnect power to the appliance before starting any work
• Handle the board by its edges and avoid touching components; discharge static by grounding yourself
• Reassemble panels and secure all connectors; restore power and run a function test

This is the main PCB control board that manages the appliance's electronic functions and user interface, restoring control when the original board has failed. Replaces a damaged or unresponsive main control module to return normal operation. What it does:

• Receives input from buttons/sensors and directs power to motors, valves, heaters, and displays
• Helps regulate cycle selection, timing, and safety interlocks
• Common symptom: appliance is unresponsive or won't start
• Common symptom: erratic behavior, incorrect cycles, or display errors
• Common symptom: intermittent power or control lockups

• One main PCB assembly

• Disconnect power and water before starting any repair
• Handle board by edges and avoid static discharge; use ESD protection if available
• Verify all connectors are fully seated and routed the same as original before powering up

3-cycle mechanical timer that controls the sequence and timing of wash cycles, restoring proper cycle advancement and operation for washers that won't advance or complete cycles. Fits in the original timer location to re-establish cycle control. What it does:

• Rotates the cam to advance cycle stages and routes power to the motor, pump and valves.
• Restores cycle sequencing when a machine stops mid-cycle or won't advance to the next step.
• Replaces worn or non-indexing timers that cause intermittent or no cycle movement.
• Transfers timed electrical signals to start/stop agitation, spin and drain functions.

• Disconnect power to the appliance before starting — risk of electrical shock.
• Document or photograph all wire locations before disconnecting to ensure correct reconnection.
• Install in the original orientation; secure mounting hardware and avoid forcing gears or tabs.
• After installation, run a complete cycle to ensure proper operation.

This part is a genuine OEM controller that has been manufactured by Frigidaire for use with ranges. The controller works to monitor the selected oven temperature and the heat controls. This part also features a digital clock display that shows the time and temperature settings. Over time or with regular appliance use, the controller can become worn or broken, requiring replacement. Disconnect the range from the power source and wear work gloves to prevent injuries or electrocution during the repair process.This part is sold individually and is manufactured from high-quality, durable, non-corrosive materials. This controller is intended for use with different compatible ranges manufactured by Frigidaire, Electrolux, Gibson, Westinghouse, and Kelvinator.

This electronic clock timer is the oven control module that displays the time and manages timed bake, broil and delay-start functions so your range follows programmed cooking cycles accurately. What it does

• Displays time and lets you set cook timers and delay-start/stop functions.
• Controls timed bake and broil cycles so the oven runs only for the programmed period.
• Can prevent oven from starting when clock/control is malfunctioning (symptoms: blank display, clock won't set, timer won't start).
• Interfaces with the range control console to accept keypad inputs for timed cooking.

• One clock timer (electronic oven control) assembly.

• Disconnect power at the breaker before removing the control console to avoid shock.
• Handle the control and display lens carefully to avoid scratching or damaging the keypad/display.
• Installation typically requires removing the back of the console and unplugging the wire harness; keep screws and mounting hardware.

The Convection Relay Board is an OEM part for Frigidaire ranges. As a specialized electronic component, it seamlessly powers the convection fan and heating elements facilitating enhanced bake modes.

Prolonged electromagnetic interference exposure from convection fan motors degrades functionality over time reducing useful life without replacement. Versatile air circulation cooking depends on consistent control response.

Causes relate to normal electromagnetic component fatigue from field induction multiplying across years of regular convection cooking cycles. Impacts introduce risks abruptly limiting advanced airflow recipes. 

Symptoms indicating relay board issues involve:

• Fan failing to start or run continuously as needed
• Inability to sync convection modes with lower/upper element operation
• Error codes and non-responsiveness during convection preheat 

Replacing with this OEM Frigidaire part restores air movement management. Compatibility also fits some Electrolux, Gibson, and Kenmore ranges.

This main electronic control board manages the appliance's functions and user interface, restoring normal cycle selection and timed operations when the original board fails. Replaces a failed control to return reliable electronic control of the unit. What it does:

• Receives user commands and runs the appliance's operating cycles
• Controls timers, relays and display indicators for proper operation
• Common symptom: appliance won't start or respond to controls
• Common symptom: no or erratic display, or cycles stop unexpectedly
• Helps resolve issues caused by burned or shorted control circuitry

• Disconnect power before attempting any service to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use anti-static precautions
• Verify the appliance model and part number before ordering and swapping parts

This electronic control board replaces the oven's main control module to restore user interface and timed bake/clock functions. It provides the control logic that manages heating cycles and display feedback for the range. What it does:

• Serves as the oven's primary control module, interpreting commands from the touchpad or knobs
• Controls bake/broil elements, timers, and display outputs through relay/signaling circuits
• Common symptoms: blank or unresponsive display, no heat or heating cycles won't start, or controls do not respond
• Replaces a failed or intermittent board that causes erratic oven behavior

• One electronic control board assembly

• Disconnect power at the breaker before beginning service to avoid shock or injury
• Handle the board carefully and avoid touching connector pins or components; static discharge can damage electronics
• Verify wire harness orientation and secure all connectors before restoring power.

This main control board is the appliance's central electronics that manages cycles, timing and sensor inputs so the unit operates correctly. Replace a failed board to restore control and normal electronic function. What it does:

• Interprets user commands and runs selected cycles
• Controls motors, valves, heaters, and sensors through relay/output signals
• Processes sensor feedback to regulate timing and operation
• Can cause no-start, unresponsive controls, error codes, or erratic behavior when faulty

• Disconnect power before starting; risk of shock or further damage if energized
• Handle by the edges and avoid static discharge—use an anti-static wrist strap if available
• Compare part numbers and connector layout to the old board before installing
• After install, restore power and run a diagnostic or short cycle to verify operation

This electromechanical timer assembly controls cycle timing for compatible GE ranges and ovens, restoring accurate cook cycles and timer functions. It replaces a worn or non-advancing control to help your appliance complete timed operations reliably. What it does:

• Advances and times cooking cycles so bake, broil and self-clean operations run to completion
• Restores timer and manual cycle control when the original timer stops advancing
• Helps resolve symptoms like no timer display, oven cycles that won't start or stop on schedule, or intermittent timing failures
• Works as the user-accessible timing control for front-panel settings

• Disconnect power to the appliance before beginning service to avoid shock hazard
• Access may require removing the range/oven control panel or console; keep fasteners and trim for reassembly
• Handle connectors carefully and match wiring/location during reinstallation

Defrost timer that advances the refrigerator's defrost cycle at roughly six-hour intervals to help prevent excessive frost buildup and keep cooling consistent. Replaces a failed timer to restore regular defrost scheduling. What it does:

• Advances the defrost cycle so the heater can melt frost from the evaporator on a timed schedule.
• Helps prevent heavy ice buildup that can reduce airflow and cooling performance.
• Common symptoms of a failing timer: excessive frost or ice accumulation, compressor running constantly, or inconsistent temperatures.
• Works with mechanical defrost systems to alternate between cooling and defrost intervals.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Handle connectors and wiring carefully; ensure all terminals are fully seated.
• Mounting hardware and connector types can vary by model—retain original fasteners and note wiring positions before removal.

This is the main electronic control board that manages user inputs and the appliance's cycle functions, restoring reliable control and display operation when the original board fails. What it does

• Receives and processes button and touchpad commands to run cycles and settings
• Controls timers, relays, and signals to motors, valves, and heaters as applicable
• Helps resolve symptoms like no display, unresponsive controls, or cycles that won't start or advance
• Stabilizes erratic operation caused by a failed or damaged control board

• One electronic control board

• Disconnect power before accessing electrical components to avoid shock or damage
• Replace only with the matching part number; transfer any required connectors or harnesses from the old board

The Control Board with Overlay is an OEM part for Frigidaire wall ovens and ranges. This control board governs all functionality of the oven through electronic programming and user inputs.

Causes of a bad control board can include moisture damage, component failures from power surges or fluctuations over time, and software/firmware issues.

Symptoms of a bad control board include:

• Failures of temperature regulation or heating elements
• Inoperable or unresponsive control knobs and display
• Continuous beeping noises or error codes shown
• The oven failing to begin or complete cooking cycles

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.