Need Help?
Call or text
Fix a washer that won't drain or shows F9 E1 error with this drain pump. Most DIYers complete this repair in under 30 minutes with basic tools.
Installed new pump Read more
The Washer Circulation Pump Motor is an OEM replacement part for LG washing machines. It is a vital component responsible for circulating and pumping water through the wash tub during the various wash and rinse cycles.
Symptoms of a faulty circulation pump motor include:
Causes of a bad circulation pump motor can range from normal wear and tear over time, electrical malfunctions, blockages or obstructions in the pump impeller, or physical damage from foreign objects or debris.
This OEM LG part is also compatible with Sears/Kenmore washing machine models.
Replaced the drain pump and circulating pump units. Read more
The Vent Blower Assembly is an OEM part for Frigidaire dishwashers. It is designed to help ventilate the dishwasher by expelling hot, moist air from the interior after the washing cycle.
You should replace the vent blower assembly if it becomes faulty. Causes of a bad vent blower assembly can include regular wear and tear, blockages from debris, or electrical issues. A malfunctioning vent blower can lead to poor drying performance and excessive moisture inside the dishwasher.
Symptoms of a bad vent blower assembly include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
I had an appliance repair guy come and he told me it was possibly the vent assembly but if changing it didn't fix the problem it would be the control board next. He felt it was not worth the money to repair because he would have to disconnect everything just to get to the vent on the right rear top of the dishwasher. When i took the DW out thinking i had to buy a new one i saw this part was stuck open and covered in limescale deposits and grime.I ordered the part from appliance pros and payed... Read more
Washer won't drain or shows DRN code? This drain pump removes water from the tub each cycle. DIY-friendly repair with video guide included.
Its under warranty so I called Sears repair. The Technician determined the pump was bad order. After a month of waiting for Sears to order the part and the back and forth on the phone, I looked for the part myself. You guys sent the part and in 2 Days my washer is working again. No word yet, from Sears part order.. Read more
Dishwasher not draining or water left in tub? The drain pump assembly removes wastewater during cycles. DIY repair typically takes about 1 hour.
I very seldom respond to requests for feedback like this but definitely feel moved to do so in this case. When our 8 year old dishwasher started acting up my initial reaction was to simply replace it. I wasn't sure what was wrong, nor if I would be able to find the right part once I did figure out the problem. The troubleshooting advice on this website was spot on and I quickly figured out what needed to be replaced. The repair videos were easy to follow and the parts were here two days... Read more
Fix a dishwasher that won't spray water or makes humming sounds. This circulation pump and motor assembly repair is lengthy but not difficult.
Dishwasher made a humming sound but no water was circulating around. Searching around, I decided that it was either the inlet valve or the pump/impeller. I started with the inlet valve since it’s an easier repair. It didn’t work, no problem, now I have a spare. I then changed the pump and motor assembly. When I got the old one out, the impeller was broken along with a crack in the plastic housing. The repair took about 3 hours following along with the video. The dishwasher now works like... Read more
The Pump Diverter Motor is an OEM part for Whirlpool dishwashers. It controls the direction of water flow within the dishwasher, ensuring that water is properly directed to the spray arms during the wash cycle.
Common causes of a bad diverter motor include electrical malfunctions, wear and tear over time, or blockages caused by debris. These issues can prevent the motor from functioning correctly, leading to poor wash performance.
Symptoms of a bad pump diverter motor include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Replace the diverter. Read more
Washer won't drain or makes loud whining noise? This drain pump removes water between cycles. DIY repair takes 30-40 minutes with basic tools.
Replace the drain pump after watching a video demonstrating the process. The washing machine had run properly and emptied, so I was surprised how much water remained in the pipe after disconnecting the old pump. Plan on having 2-3 large towels underneath before removing it. The most difficult part (and most irritating) was replacing the intake and outtake hoses with the existing spring clamps. The drain hose into the pump took almost twenty minutes to attach properly. If the hardware store was... Read more
Fix leaks around the dishwasher motor or poor spray pressure with this impeller and seal kit. DIY-friendly repair takes about 2 hours with basic tools.
My dishwasher quit cleaning dishes and lost all pressure. The food screen would keep clogging up and I would have to take it out and clean it by hand. After putting a new impeller in, the "gears" on the impeller connected with the screen blades, the old impeller the "gears" were stripped off. And the new impeller comes with new seals, after taking old one out I noticed it wasn't long before my old seals would have started leaking. Very simple repair if you watch the great video that... Read more
Dishwasher won't drain or making rattling noises? This drain pump assembly removes water during the drain cycle. DIY-friendly repair with video guide.
Looked up and found the part on Appliance PartsPros.com and fixed the problem for less than $50 and a minimum of trouble. Works great now! Read more
Fix a washer that won't drain or makes grinding/humming sounds during drain cycle. This pump removes water from the tub. DIY repair in 10-15 minutes.
I noticed when we would run washer water would stay in tub. Pump would hum but not pump water out. Layed washer on its belly . Pump was at bottom of washer. Easy access . Removed 3 screws,2 wires , & 2 hose clamps. Didn't have to call Maytag Repair man. Easy Read more
Fix loud grinding or buzzing noises during wash cycles with this dishwasher pump and motor assembly. Moderately difficult repair, takes 1-2 hours.
I hated to call a repair Guy, because by the time it takes them to do the service call and then order the part, then schedule another appointment. It would be at least two weeks. I figured I would just buy a new Dishwasher and have it delivered the next day. That was before I saw the price of a new dishwasher. I looked on line and found Appliance Parts Pros, saw the you tube video figured a trained monkey could do this change out on the motor assembly, so why can't I. I ordered the complete... Read more
Fix a dishwasher that won't clean properly with a new circulation pump motor. This part sprays water over dishes during wash and rinse cycles.
Replaced the circulation pump Read more
Fix a washer that won't drain or leaves standing water. This drain pump removes water from the drum during drain and spin cycles. Moderate DIY repair.
Great Read more
Fix leaking water from the bottom of your washer with a new pump casing. Houses and protects the water pump. Moderate DIY repair with clear instructions.
This was Kenmore front load washer made by LG. Model 796.41302610 First, AppliancePartsPros.com has been great. This is my fourth time using them. Staff, DIY comments, and videos are all very helpful. Always ended up with the right part and received next day. The machine made an odd noise on start-up. I ran diagnostics. Had a problem finding how to do diagnostics since the instructions in the manual were wrong. Found the correct process on YouTube. Needed to hold the spin and soil buttons... Read more
The Filter Assembly is an OEM part for Whirlpool dishwashers. This component is responsible for trapping food particles and debris, preventing them from recirculating during the wash cycle and ensuring that dishes come out clean.
Causes of a bad filter assembly can include accumulated debris, regular wear from repeated use, or damage from harsh cleaning agents. A compromised filter can reduce the dishwasher’s cleaning performance and lead to buildup inside the machine.
Symptoms of a bad filter assembly include:
Replaced filter. It works great now, no more brown spots. Read more