Need Help?
Call or text
This is a plastic push-on washer motor pulley.
Acualy sounded and looked major but with a littel help with you tube the job only took 30 minutes. 3 bolts for the water pump pulley broken pulley poped off new one klick into place simple belt install good to go. Parts saved me $40 and where here in only 2 days. I couldnt be happyer. Read more
Dishwasher rack mounting strip roller.
Ordered new frame, wheels and SS slide for the bad side. Job was done in 10 minutes and the rack now works smoothly. Read more
Color: light gray. Measures about 3 inches high by 6 inches deep.
Part needed replacement Read more
Right Side. For left side use part number WPW10251050.
I removed the basket, studied the old adjusters before removing them, and installed the new ones using some of the old parts(adjustment levers and the covers). adjusters work like a charm.. the only tool required was a screwdriver with removable torque bit. Read more
For complete assembly for easier installation order WP37001287
I took the tumbler drum out and looked at the pulley and it was not rotating freely. The idler arm had some wear on the attached post so I replaced bothe parts. Since I was in there already I replaced the drum rollers and dryer belt for good measure. I reassembled the dryer and it works great. The best part of the experience was the parts order. I ordered the parts around 3:00 pm one day, standard shipping, and they were on my doorstep around 1:00 pm the next day. I'm still wondering... Read more
This replacement idler pulley keeps the drive belt tight and tracking correctly so the drum can rotate smoothly. It restores quiet, consistent operation when the original pulley is worn or seized and causing belt slippage or noise.
Decided to order the kit with both rollers even thou the right one looked OK.Also ordered the pulley for the idler. Watched the video for the pulley installation,super helpful on a couple of the steps!! Everything went great. A 14 year old dryer still has life! Parts ordering and delivery was also great!!! Thank you. Read more
This idler assembly is the spring-loaded belt tensioner that keeps the drive belt correctly tightened. Replacing a worn or seized idler restores smooth belt tracking, reduces squeal, and helps prevent slippage or loss of drive.
Un plugged dryer. It was an easy fix, popped the top up. Removed the two screw that held the front on and also unclipped the door switch. Released tension that was on belt and removed drum. Removed old front slides cleaned up area and replaced them. Popped the ring that held the rear drum wheels and placed the new ones with a dab of grease. Un hooked tension spring for idler and removed old one and put the new one in. Make sure you place it through the correct hole and it makes it firmly into... Read more
Attaches to the inner tub for the upper rack
Replaced left hand rack adjuster. Read more
This dryer drum support roller holds the drum on its axle and lets it rotate smoothly. Replacing a worn or noisy roller restores quiet, even tumbling and helps prevent belt strain and added wear on related parts.
Had to replace the drum rollers, idler roller and belt. Machine has never been taken apart so it was a learning event as well as cleaning all the internals components. Parts that were purchased fit fine, no problem with figment. More time was spent oncleaning and prepping the machine for the new parts Read more
This rear support wheel replaces a worn roller that helps a sliding drawer or rack glide smoothly and stay aligned. Restores easy, even movement and reduces dragging, scraping, or tilting during everyday use.
Had to unscrew the axel bolt & remove broken plastic wheel & replace it with the new plastic wheel. Easy fix. Then install newly repaired dish washer. Read more
Left side. For right side use part number WPW10251051.
Pulley, spinner restores proper spinner rotation by guiding the spinner assembly and maintaining belt alignment. Replacing a worn or damaged pulley reduces noise and vibration during spin and helps improve water extraction. What it does:
After disconnecting power, removed rear access panel. belt was already off. Removed bolt washers at center of pulley, removed pulley.installed new pulley on to drum shaft. Installed washers and bolt with blue thread locker applied to threads. Installed new belt. Reinstalled rear access panel. Reconnect to power. good to go! Read more
This upper rack wheel and axle assembly lets your dishwasher's top rack glide smoothly and stay level. Replace a cracked or missing wheel to fix hard-to-slide racks, scraping noises, or a rack that slips off the rail.
Found the parts I needed on the Appliance Parts Pros website. Went to my local appliance store with the pictures from the website, and they did not agree that the replacement rack roller was what I needed. I was to return with a picture of my Dishwasher upper rack to show them. This was a 30 mile round trip, that I was going to have to do again before the parts I needed would even be ordered. Came home, went back to Appliance Parts Pros website and ordered the 2 items I needed. They... Read more
Used on the upper dishwasher dishrack.
The video on AppliancePartsPro is not for the part I ordered. After searching a bit I learned that I needed a 3/16" hex driver to remove the two screws that hold the assembly to the washer. After that it was easy. Just remove the two screws, take off the old one and attach the new one. Easy. Read more
The Dishrack Wheel is an OEM part for Whirlpool dishwashers. Each wheel works to smoothly guide the upper dishrack in and out of the dishwasher for convenient loading and unloading of dishes.
Causes of a bad wheel can include normal wear and tear from years of use or warping/bending due to overloading of the dishrack.
Symptoms of a bad dishrack wheel include:
This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
I replaced it with the wheel I ordered from AppliancePartsPros.com Read more
This tub wheel mount secures the rack support roller to the dishwasher tub wall so racks roll smoothly. Replace a cracked or loose mount to restore smooth rack movement and prevent binding or sagging during loading and unloading.
Fixed it with the parts purchased on Appliance Parts Pros. Small job. Read more