Range / Cooktop / Oven Heating Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74010750
The Oven Bake Element is an OEM part for Whirlpool ovens. This crucial component is responsible for providing the heat necessary for baking. Located at the bottom of the oven, the bake element heats up when electricity passes through it, allowing your oven to reach the desired cooking temperature. This OEM Replacement Part has push-on terminal ends and measures approximately 23-5/8"wide x 15-3/8" long, with 3-3/8" inserts
Symptoms of a failing oven bake element include:
- Lack of heat production when the oven is turned on
- Uneven baking results
- Visible damage to the element such as blistering or splits
- A trip in the circuit breaker when the oven is activated
Causes of bake element failure typically include thermal stress causing material fatigue, accidental damage during cleaning, and electrical issues such as short circuits.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
If you are unable to use your old connectors order TJMA02875-1.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Element will not heat
-
Oven is too hot
See more...
Do-It-Yourself Stories from Customers like You
The baking element was on fire Charles M. • Bandera , TX • March 30, 2014
I finally found the right serial number and found the part at Appliance Parts Pros.
I was skeptical that they would send the element that had the correct rear brace fixture.
when it came 2 days later i opened the box the Part was correct and it took about 15 minutes to replace since there are only two screws.
My oven works fine now.
THX
Read more
More
$39.95
- Compare At:
-
$47.14
- You Save:
-
$7.19
Genuine Ge part
By: Ge
Part Number: WB30T10130
The Element Haliant 12 Inch is an OEM part for GE ranges. This radiant heating element is designed to provide even and consistent heat for cooking on your stovetop. It ensures efficient transfer of heat to your cookware, allowing for precise temperature control.
Over time, heating elements can wear out or become damaged due to repeated use, exposure to high temperatures, or accidental impact. If the element becomes faulty, it can result in uneven heating or failure to heat up entirely.
Symptoms of a bad element include:
- Element not heating up
- Inconsistent or uneven heating
- Visible damage or burn marks on the element
- Sparking or unusual noises during operation
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Center coil of the large dual burner went out Amy G. • Fordland , MO • July 01, 2014
Two screws in the front, lifted top, removed old burner, replaced with new one. The trickiest part was getting the wires connections loose from the old burner.
Read more
More
$146.95
- Compare At:
-
$174.87
- You Save:
-
$27.92
Genuine Ge part
By: Ge
Part Number: WB30X24111
The Element Radiant 9" Dual is an OEM part for GE ranges and cooktops. This dual-element radiant burner provides versatile cooking options, offering both a small and large heating area within a single burner. It ensures efficient and even heat distribution for a variety of cooking needs, accommodating different pot and pan sizes.
Causes of a bad radiant element can include normal wear and tear, electrical issues, or damage from heavy cookware or impact. Over time, these factors can lead to the element failing to heat properly or not functioning at all.
Symptoms of a bad radiant element include:
- The burner not heating up or heating inconsistently
- Only one of the dual elements functioning
- Visible damage or discoloration on the element
- The burner cycling on and off more frequently than usual
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Burner not working. Peter J. • Dunedin , FL • August 09, 2019
Ordered part, reviewed several videos demonstrating replacement of burner.
Read more
More
$101.79
- Compare At:
-
$122.15
- You Save:
-
$20.36
Genuine Whirlpool part
By: Whirlpool
Part Number: 326791
The Oven Bake Element is an OEM part for Whirlpool ovens. This crucial component is located at the bottom of the oven cavity and is responsible for providing the heat needed for baking. The bake element converts electrical energy into heat, which is then distributed throughout the oven to cook food evenly.
Common causes of a bad bake element include excessive use, accidental damage during cleaning, or a power surge that can burn out the element.
Symptoms of a bad Oven Bake Element include:
- The oven not heating up to the set temperature.
- Visible damage to the element, such as blistering, cracks, or breaks.
- Lack of heat when the oven is turned on
- An increase in cooking times
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Oven not heating evenly
-
Little to no heat when baking
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Bottom coil of oven was not heating Charles W. • Suffolk , VA • February 04, 2017
I googled the model number of the oven and came across AppliancePartsPros.com The coil along with replacing video was right at hand. I ordered the part, got it three days later (standard shipping) and installed it. To sum it up, it was a five minute job.
Read more
More
$57.95
- Compare At:
-
$68.96
- You Save:
-
$11.01
Genuine Ge part
By: Ge
Part Number: WB44K5013
The Oven Bake Element is an OEM part for GE ovens. This component is located at the bottom of the oven cavity and is responsible for generating the heat needed for baking. By converting electrical energy into heat, the bake element ensures even temperature distribution throughout the oven, allowing for consistent cooking results.
Causes of a malfunctioning Oven Bake Element may involve visible signs of wear or damage, like blistering or holes, a break in the element that hinders proper heating, and burnout or malfunctioning resulting from age or excessive use.
Symptoms of a failing Oven Bake Element include:
- The oven not heating to the set temperature
- Uneven baking results
- No visible glow from the element when the oven is turned on
- The oven taking longer than usual to preheat
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014
Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds.
Read more
More
$63.95
- Compare At:
-
$76.10
- You Save:
-
$12.15
Genuine Whirlpool part
By: Whirlpool
Part Number: WP660533
The 8-inch large Surface Element is an OEM replacement part for Whirlpool induction ranges. It serves as an integral independent heating zone to boil, sauté or simmer large pots quickly.
Symptoms of a bad surface element include:
- Inability to power on or heat evenly across the surface
- Slow inconsistent heating or hot/cold zones developing
- Parts of the coil visibly cracked or disconnected
- Tripped circuit breakers upon heat-up that don't reset
Causes stem from normal thermal stress fatigue of coiled elements exceeding thousands of temperature cycles daily. Continuous high wattage energy may cause microscopic metal deterioration developing over a decade plus of use.
This genuine Whirlpool replacement part is compatible with Kenmore, Roper and Jenn-Air ranges.
For matching 6-inch element order WP660532.
Do-It-Yourself Stories from Customers like You
The burners on my drop in stove would not work the connections and the surface elements were in bad shape Luise C. • Worth , MO • November 23, 2014
I lucked out my nephew was here to deer hunt and he helped me. I do believe I could have done it on my own but was more confident with his help. I will say the videos did help.
Read more
More
$35.54
- Compare At:
-
$53.59
- You Save:
-
$18.05
Genuine Ge part
By: Ge
Part Number: WB30M2
The 8 Inch Large Surface Element is an OEM part for GE ranges and cooktops. This heating element is used on the cooktop to provide a consistent heat source for cooking. It fits into the designated spot on the stove and connects to the electrical system, allowing users to control the temperature for various cooking needs.
Causes of a bad surface element can include wear and tear from frequent use, electrical malfunctions, or damage from spills and food debris. Overheating or accidental impacts can also impair its functionality.
Symptoms of a bad 8 Inch Large Surface Element include:
- The element not heating up
- Uneven heating or hot spots on the element
- Sparks or electrical noises when the element is in use
- Visible damage or burns on the element
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Old and scarred burners and pans Kirk W. • Indianapolis , IN • March 22, 2015
Burners were an exact match for the originals and the pans fit perfectly. Vastly improved the appearance of an old cook top and allowed us to to not have to replace it before our home goes up for sale.
Read more
More
$51.95
- Compare At:
-
$77.98
- You Save:
-
$26.03
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9760774
The Broil Element is an OEM part for Whirlpool ovens. It is responsible for providing the high heat necessary for broiling food, located at the top of the oven cavity. This element ensures even and consistent heating for broiling.
Over time, the broil element can wear out or become damaged. Causes of a bad broil element can include electrical issues, excessive use, or physical damage from cleaning or handling.
Symptoms of a bad Broil Element include:
- The broil function not working
- Uneven heating during broiling
- Visible damage or breaks in the element
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Replace upper oven brioler element Robert F. • Marlboro , NJ • September 29, 2014
DISCONNECT CIRCUIT BREAKER!!!. Remove oven door. Remove two screws that attach the element to the back of the oven, and two screws that secure element to the oven roof, then remove element. Had to be careful that the four wires don't slip into the back of the oven (difficult) to keep them from falling back as they are very short. Remove and replace element. I should have also detached the temp probe as it gets in the way and is easily broken off its flimsy mounting plate. The hardest part is...
Read more
More
$122.53
- Compare At:
-
$145.81
- You Save:
-
$23.28
Genuine Frigidaire part
By: Frigidaire
Part Number: 316442300
The Range Surface Element is an OEM replacement part for Frigidaire electric ranges. It is a crucial component that generates heat for cooking on the stovetop surface.
Symptoms of a bad range surface element include:
- Uneven or insufficient heating of cookware
- Element failing to heat up or taking an excessive amount of time to reach the desired temperature
- Visible signs of damage, such as cracks or warping on the element's surface
- Unusual smells or noises coming from the element during use
Causes of a bad surface element can range from electrical malfunctions to physical damage caused by impact or exposure to excessive heat over time.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
My stove is really old one of my elements started splitting & my drip pans were rusty Juli R. • Dickinson , TX • September 19, 2014
My old White Westinghouse stove has easy replacement of the elements & drip pans. They literally pop in & out with no effort or education necessary.
Read more
More
$46.74
- Compare At:
-
$55.15
- You Save:
-
$8.41
Genuine Frigidaire part
By: Frigidaire
Part Number: 318254906
The Bake Element is an OEM part for Frigidaire ovens. It is responsible for providing the necessary heat for baking by converting electrical energy into heat within the oven cavity, ensuring even and consistent cooking results. It measures 19-1/2" wide, 15" long, and has 3-1/2" inserts, with a rating of 3400 watts and 240 volts.
Causes of a bad bake element can include normal wear and tear over time, damage from high temperatures, or electrical malfunctions that cause the element to short out or break.
Symptoms of a bad bake element include:
- Uneven baking results
- The oven not reaching the desired temperature
- Visible damage or breakage on the element
- The element not glowing red when in use
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Broken Newton W. • Austin , TX • August 23, 2016
With my tools
Read more
More
$153.95
- Compare At:
-
$184.74
- You Save:
-
$30.79
Genuine Ge part
By: Ge
Part Number: WB44T10018
The Bake Element is an OEM replacement part for GE ranges. It is a crucial component responsible for generating the intense heat necessary for baking and roasting in the oven cavity.
Causes of a bad bake element can include mechanical failure, electrical malfunctions, or simply reaching the end of its lifespan due to repeated heating and cooling cycles.
Symptoms of a bad bake element include:
- Oven not heating up properly or failing to reach the set temperature
- Uneven heating or hot spots within the oven cavity
- Visible damage or breaks in the element coil
- Unusual smells or burning odors emanating from the oven
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore oven models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
The self cleaning feature of my ge double oven hasn't worked in years and recently the upper oven baking element stopped working Robert A. • Enfield , CT • October 19, 2015
I wanted to get the upper oven baking element replaced; it hasn't been working for a few months. This double oven has had two other issues, there is a fan that comes on to cool the electronics panel, That fan has made excessive noise and it operates for 2-3 hours after the oven turns off. The other problem with the oven is the Self-Cleaning feature runs for about 15-30 minutes and then turns off with an error code. I've had a local appliance repair person in to address the error code and...
Read more
More
$93.95
- Compare At:
-
$112.74
- You Save:
-
$18.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10310274
The Oven Bake Element is an OEM part for Whirlpool ovens. It is responsible for providing the heat required for baking by generating radiant heat at the bottom of the oven cavity. This element ensures that the oven reaches and maintains the desired baking temperature, contributing to consistent and even cooking results.
Causes of a bad bake element can include regular wear and tear, overheating, or physical damage such as cracks or breaks in the element itself. A malfunctioning bake element can lead to uneven cooking and longer preheat times.
Symptoms of a bad oven bake element include:
- Oven not heating or taking a long time to preheat
- Uneven baking results
- Visible damage or burning on the element
- The element not glowing red when in use
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven would not reach set point temp it would only reach about 250 f Kenneth M. • Olive Hill , KY • June 27, 2016
Took out the old element and checked with olm meter determined bad, no continuity. Orded new Element from Appliance Parts Pros. Had new one in less than 2 days easy fix.
Read more
More
$85.56
- Compare At:
-
$101.82
- You Save:
-
$16.26
Genuine Ge part
By: Ge
Part Number: WB30T10133
The Element Radiant 9 Dual is an OEM part for GE cooktops and ranges. It provides the heating surface for cooking and is designed to offer two different heating zones, allowing for versatile temperature control depending on the size of the cookware.
Causes of a bad element radiant can include burnouts from excessive use, damage due to spills or impacts, and electrical issues. A faulty heating element can result in uneven cooking or the element failing to heat up at all.
Symptoms of a bad Element Radiant 9 Dual include:
- The element not heating or only partially heating
- Uneven heating across the surface
- Visible damage or discoloration on the element
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dual burner did not work the warm light for burners was always on Mary S. • Portage , WI • May 30, 2015
Replace 9" dual burner.
Read more
More
$104.95
- Compare At:
-
$124.89
- You Save:
-
$19.94
Genuine Ge part
By: Ge
Part Number: WB30T10155
The Triple Haliant Element is an OEM part for GE cooktops and ranges, designed to provide versatile and powerful heating options. This element features a triple-ring design that allows for three different sizes of cookware to be heated efficiently on the same burner. It's ideal for situations requiring precise temperature control and flexibility, such as when cooking with large pots or pans that need even heat distribution.
Causes for a Triple Haliant Element to fail can include prolonged use leading to wear and tear, overheating that damages the internal components, or electrical issues such as short circuits.
Symptoms of a bad Triple Haliant Element include:
- The element does not heat up
- Only parts of the element heat up
- Unusual fluctuations in heat levels
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Inner most burner not working on GE triple haliant burner. Ben M. • Chattanooga , TN • October 05, 2023
Did research to determine what might cause problem. Determined that it was either the infinity switch or the triple haliant burner. Watched several YouTube videos on testing the infinity switch, but none exactly replicated this switch. Chatted with AppliancePartsPros.com on a Saturday on how to test, but later determined I needed more information, so I posted a question on the APP page for the triple burner. Received a quick response from APP which isolated the problem as the burner, not the...
Read more
More
$175.95
- Compare At:
-
$207.62
- You Save:
-
$31.67
Genuine Ge part
By: Ge
Part Number: WB44K5009
The Broil Element is an OEM part for GE ovens. This element is located at the top of the oven and is crucial for the broiling function, providing high heat for cooking dishes such as meats and vegetables directly under the heat source. The broil element glows red hot when in use, creating the necessary temperature to sear food and lock in flavors.
Symptoms of a failing Broil Element include:
- The element not heating up when the broil setting is activated
- Uneven cooking or lack of browning on food intended to be broiled
- Visible damage to the element, such as blistering, bubbling, or breaks in the element coil
- No visible glow from the element during operation
Causes of a bad broil element often involve burnout from regular use, electrical issues such as faulty wiring or a malfunctioning thermostat that doesn't cycle the heat correctly.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Broil element burned out Tommie S. • Greensboro , NC • June 12, 2014
Once I received the element within three days, I simply removed the other element by unclipping and unplugging lugs in rear. Placed the new one in clips and connected lugs and all was good!
Read more
More
$66.95
- Compare At:
-
$79.67
- You Save:
-
$12.72
Genuine Ge part
By: Ge
Part Number: WB44T10009
The Oven Broil Element is an OEM part for GE ovens. This element is located at the top of the oven cavity and is responsible for broiling, providing high heat for cooking tasks such as searing meats or browning the top of dishes.
Causes of a bad Oven Broil Element can include prolonged use, leading to eventual wear and tear, exposure to food spills and grease that can corrode or damage the element, and electrical issues that may cause it to fail prematurely.
Symptoms of a malfunctioning Oven Broil Element include:
- The element not glowing red when the broil function is activated
- Uneven cooking or browning of food
- The oven taking longer than usual to broil
- No heat production when the broil setting is selected
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Bake unit cracked and started glowing and sparking like the sun both elements replaced Steven S. • Somerset , KY • April 21, 2015
Easy fix. Both elements replaced while I was at it, so all new. Figured if one went the other was going to follow.
CIRCUIT BREAKER OFF. Removed the back metal panel with my nut driver for the hex head screws. Note where the panel may slip under tabs for support. Remove slip on electrical connections on upper and lower elements. May need a pliers. (I did not want to just pull the element and the wires into the oven with the element and remove them there, like a technician would do. After 15...
Read more
More
$54.36
- Compare At:
-
$86.47
- You Save:
-
$32.11