Range / Cooktop / Oven Parts
Bestselling
Price High to Low
Price Low to High
By: Ge
Part Number: WB31X46067
The 6" Surface Burner with Sensor is an OEM part for GE ranges. This part provides precise heating for cooking on your range's stovetop. The integrated sensor helps regulate the burner temperature, ensuring even and consistent cooking results.
Burner not heating up
Inconsistent or uneven heating
Burner temperature not being properly regulated
Error codes or malfunction indicators on the range display
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Popcorn popper melted to burner. Kathryn V. • Asbury , NJ • March 13, 2023
Put in a new 6" surface burner.
Read more
More
$77.95
Compare At:
$92.76
You Save:
$14.81
By: Ge
Part Number: WB35X37973
Replaces cracked, rusted, or corroded oven bottom pan and heat deflector. Installs in the base of your range oven cavity. Simple 2-screw removal.
Do-It-Yourself Stories from Customers like You
Abused grates and oven bottom Adrienne T. • Port Jervis , NY • June 26, 2015
Ordered parts ( very easy) and replaced old ones . Pop out, pop in. Simple but it made my stove and oven new again.
Read more
More
$96.55
Compare At:
$114.89
You Save:
$18.34
By: Ge
Part Number: WB27K10355
Range won't heat or display is blank? This electronic control board manages temperature and oven functions. DIY-friendly repair, typically 10 minutes.
This part fixes the following symptoms
Touchpad does not respond
Will not program
See more...
Do-It-Yourself Stories from Customers like You
Ge oven would not reach temperature set and seemed to be an intermittent problem Billy L. • Auburn , CA • October 24, 2014
I found exploded parts view of oven and looked for oven sensor probe and control card parts. I also looked at great videos and read past repair stories. I decided the problem had to be one of the two parts (probe or card) and ordered both.
I decided that the probe should be changed first rather than involve a circuit card. I changed the probe and tested the oven and it works again.
Read more
More
$111.95
Compare At:
$133.22
You Save:
$21.27
By: Frigidaire
Part Number: 316032411
Oven won't heat to correct temperature or won't turn off? The thermostat regulates oven heat. DIY repair typically takes 15-60 minutes with basic tools.
This part fixes the following symptoms
Oven is too hot
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Oven thermostat was broken Johnny C. • Laurel , MS • February 08, 2016
Removed old thermostat and pulled old thermocouple fron oven. ran new thermocouple to oven and put in clip, tistalled new thermostat using 2 phillips head screws, done.
Read more
More
$84.66
Compare At:
$99.90
You Save:
$15.24
Do you need help?
Get Questions Answered Instantly.
By: Samsung
Part Number: DE92-02588J
Fix control panel not responding, flickering display when hot, or SE error code. This main control board restores full oven functionality. DIY repair.
Do-It-Yourself Stories from Customers like You
No digital buttons work error code ec Ricky H. • Lincoln , AR • September 15, 2017
Ordered a Pcb board and membrane switch it fixed the problem
Read more
More
$252.95
Compare At:
$301.01
You Save:
$48.06
By: Frigidaire
Part Number: 5304508269
Gas burners won't ignite and there's no clicking sound? The spark module provides the electrical spark to light all burners. DIY repair in under 1 hour.
Do-It-Yourself Stories from Customers like You
No ignition spark on any of the top burners of fridgidaire oven Ronald C. • Loveland , OH • June 29, 2014
Replaced spark module - oven was less than two years old. Like a lot of new gas ovens, turning on any one burner to 'lite' sends sparks to all 5 top burners. The difficulty was getting to the spark module, as some generic videos show access to it from the upper panel on the back of the oven, but it wasn't there. Had to take off the entire top burner panel of the oven to get to the module, and then it was simple to replace the module by transferring the wires to the new one. I did see on...
Read more
More
$79.95
Compare At:
$95.94
You Save:
$15.99
By: Samsung
Part Number: DE47-20037A
Range won't heat or overheats? This high limit thermostat regulates oven temperature to prevent overheating. Easy DIY repair, typically 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Samsung electric range door would not open after cleaning cycle Christopher H. • Breckenridge , CO • September 15, 2014
With the help of several You Tube videos I was able to diagnose the problem. Diagnosis was confirmed with the help of a multi-meter. The thermo fuse was dead. I ordered the part from Appliance Parts Pros on Wednesday and it arrived via UPS on Friday afternoon. The fuse was very easy to remove and replace and my range was up and running in less than 15 minutes. Local repair service wanted $100 to do the diagnosis plus parts plus a return trip for installation. I got the part from Appliance Parts...
Read more
More
$29.75
Compare At:
$35.70
You Save:
$5.95
By: Whirlpool
Part Number: WP4449247
Replacement inner glass for oven doors. Installs as the interior viewing window. Needed when glass is cracked, broken, or shattered. Fits within door frame.
Do-It-Yourself Stories from Customers like You
Broken inner glass Ryan S. • Seattle , WA • April 22, 2015
I removed the oven door, removed all screws, detached the front from the rear, carefully took out broken glass, replaced with new (smaller sized than original, but worked), reattached front and rear panels, replaced screws, and replaced door to finish.
Read more
More
$82.39
Compare At:
$98.04
You Save:
$15.65
By: Ge
Part Number: WB03X32194
Control knob kit for gas cooktops. Replaces broken, cracked, or worn knobs that control burner flame and heat levels. Snaps into place on valve stem.
Do-It-Yourself Stories from Customers like You
Knobs are made out of plastic broke when you turn the knob Deborah B. • Kendall Park , NJ • August 01, 2016
Had to buy two more to replace it probably in due time will have to replace others so sad that it is made so cheap. Spend so much for a cooktop and only had it for a year and already had to replace something GE profile
Read more
More
$96.95
Compare At:
$115.37
You Save:
$18.42
By: Ge
Part Number: WB20K8
Oven not reaching set temperature or won't turn off? The thermostat regulates oven heat. DIY repair typically takes 30-60 minutes with basic tools.
This part fixes the following symptoms
Oven is too hot
Little to no heat when baking
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Oven came on with the temperature dial in the off position and wouldn't turn off Jason V. • Lake Worth , FL • January 13, 2016
The repair was relatively simple and quick. The only part required was a new oven thermostat assembly and the tools I used for my model was a flathead screwdriver, cross-point screwdriver, torque bit and 1/4 inch socket using a bit driver. To complete the repair, I did the following:
1. Remove all top stove burner pieces and place to the side. Remove the 3 three screws (torque bit) in each of the 4 burner locations. That will allow the top lid to separate from the main unit later.
2. Pull...
Read more
More
$158.65
Compare At:
$187.21
You Save:
$28.56
By: Ge
Part Number: WB44X134
Broiler not heating or glowing red? This broil element restores high-heat broiling from the top of your oven. DIY repair in 15-30 minutes with basic tools.
This part fixes the following symptoms
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
I needed a new gasket, the broiler element had burned up and the light lens was broken many moons ago Paula B. • Scenery Hill , PA • June 22, 2017
I have had this oven for 40+ years. It is an enamel oven, something that you can no longer buy. Because I did not wish to buy new, I decided to service it myself and searched for the parts I needed. AppliancePartsPros.com was the only site to offer all three parts, so many having been discontinued by other providers. I replaced the oven gasket, the broiler element & the lens without any difficulty. I have replaced the bake element previously as well. I am very grateful that I was able to keep...
Read more
More
$42.27
Compare At:
$49.88
You Save:
$7.61
By: Whirlpool
Part Number: WPW10324738
The Oven Igniter is an OEM part for Whirlpool gas ranges. It is responsible for generating the spark needed to ignite the gas burner.
Oven or burners failing to turn on or stay lit
Requires repeated attempts at ignition before activating
No spark or glow seen through the observation window
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The upper burner in my oven would not ignite Jesse L. • Mustang , OK • December 17, 2019
Replaced the oven igniter Whirlpool Part Number WPW10324738.
Read more
More
$198.95
Compare At:
$236.75
You Save:
$37.80
Shop With Confidence
Over 15 million customers served!
By: Frigidaire
Part Number: 5303935086
The Surface Unit Switch Kit is an OEM part for Frigidaire ranges. It controls the power and heat levels to the surface burners on the cooktop, allowing you to adjust the temperature for cooking. This kit typically includes the necessary components to replace a faulty switch and restore proper functionality to the burners.
Causes of a bad surface unit switch can include electrical malfunctions, wear and tear from regular use, or damage due to spills or impacts. A faulty switch can prevent the burner from heating correctly or at all.
Symptoms of a bad surface unit switch include:
Burners not heating up or heating unevenly
Inability to adjust the burner temperature
Burners not turning on or off properly
Sparks or electrical odors near the switch
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My kenmore electric range burners were constantly on high Eric M. • Long Beach , CA • January 23, 2017
When I called customer service your representative at Appliance Parts Pros was able to help me diagnose the problem and order the two parts that I needed. both parts arrived the next day and with helpful tutorial videos I was able to replace both the Surface Unit Switch and the Universal Element in less than 45 minutes.
Thanks so much for the great service and the money you saved me.
Read more
More
$46.35
Compare At:
$55.62
You Save:
$9.27
By: Ge
Part Number: WB06T10007
Clear protective tape secures glass panels and components on your cooktop. Replace when tape loses adhesion or during glass panel repairs. Confirm fit.
Do-It-Yourself Stories from Customers like You
Element was bad on stove Gary C. • Stone Ridge , NY • October 22, 2016
Ordered the parts from Appliancepartspros.com and watched their helpful video on how to do it. When the parts came, which was very quickly, I removed the stove, took it apart, replaced the element and put it back in place in less than an hour.
Read more
More
$51.62
Compare At:
$61.43
You Save:
$9.81
By: Ge
Part Number: WB30X20481
The Surface Heating Element is an OEM part for GE ranges. The element is a large 8" plug-in style burner. This element is designed to provide consistent and even heat for cooking on the stovetop. It is typically used for tasks such as boiling, simmering, and frying, ensuring that your cookware heats up efficiently.
You should replace the surface heating element if it becomes faulty. Causes of a bad surface heating element can include wear and tear from regular use, electrical faults, or physical damage. Over time, the element may degrade, affecting its ability to heat properly.
Symptoms of a bad surface heating element include:
Element not heating up
Inconsistent or uneven heating
Sparks or electrical shorts
Visible damage or burning on the element
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Unit would not "heat up" anymore and also found the receptacle contacts were badly burnt and charred Margaret J. • Hanover , PA • September 23, 2014
Replaced defective/worn surface unit and burnt receptacle!
Read more
More
$76.51
Compare At:
$91.05
You Save:
$14.54
By: Frigidaire
Part Number: 316237805
The Igniter and Orifice Assembly is an OEM part for Frigidaire ranges and cooktops, designed to provide a reliable source of ignition for the gas burners. This assembly includes the igniter, which produces a spark to light the gas, and the orifice, which controls the flow of gas to the burner.
Causes for replacement may include wear and tear on the igniter, clogging or damage to the orifice, or electrical failures that prevent the igniter from sparking.
Symptoms of a bad Igniter and Orifice Assembly include:
Difficulty lighting the burner or the burner not lighting at all
An uneven or weak flame that does not adjust with the control knob
Gas odor when the burner is turned on, indicating that gas is not igniting
This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.
Do-It-Yourself Stories from Customers like You
Burner wouldn't light automatically Cheryl W. • Carlsbad , CA • March 31, 2017
Replaced igniter and orifice assembly, and replaced spark module. Used the video for help, but the video doesn't show the top cover piece that needs to be taken off first.
Also the screws for the igniter set were stuck from old grease or something and had to be drilled out. Overall the project was well worth my time for the cost vs replacement decision. AppliancePartsPros.com makes it so easy to choose a part and guesstimate the probably of choosing the right one.
Read more
More
$88.50
Compare At:
$105.31
You Save:
$16.81