Refrigerator Control Board

The Dispenser Board is an OEM part for GE refrigerators. It controls the functions of the dispenser, including water and ice dispensing, and displays related settings and information.

Causes of a bad dispenser board can include electrical surges, wear and tear over time, moisture exposure, or damage from physical impacts.

Symptoms of a bad Dispenser Board include:

• The dispenser not responding to commands
• Inaccurate or no display of information
• The dispenser continuously running or not dispensing at all
• Error messages or codes on the display

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Refrigerator Defrost Timer is an OEM Replacement Part designed to manage the automatic defrost system in Whirlpool freezers. Housed at the top inside of the appliance, this component shuts off the cooling system and activates the defrost heater. The timer operates at 120V 60Hz and activates for 33 minutes every 8 hours. The dial on the timer can be turned clockwise to advance it into and out of defrost.

Causes of a faulty Defrost Timer Kit can include electrical issues, mechanical wear and tear over time, or problems with the timer's internal components.

Symptoms of a bad Defrost Timer Kit include:

• Freezer not defrosting properly, leading to excessive ice buildup
• Refrigerator running constantly or not cooling effectively
• Condensation or moisture issues inside the refrigerator
• Error codes related to the defrost system

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Main Control Board Assembly is an OEM part for GE refrigerators. The control board monitors critical operating functions like temperature regulation, defrost cycles, lighting, and user interface controls. Over time, continuous usage can cause mechanical or electrical faults within the board.

Symptoms of a bad main control board include:

• Erratic temperature fluctuations inside the fridge and freezer
• Inability to change temperature settings
• Door alarm failure to engage after excessive opening
• Lights, fans, or other internal components ceasing to operate

Causes of control board failure can stem from manufacturing defects, corrosion of electronic components from humidity/leaks, or damage due to power surges.

This OEM GE board is also compatible with some Hotpoint, RCA, and Kenmore models.

The Electronic Control with Cover is an OEM part for Frigidaire refrigerators. It manages and regulates the various functions of the refrigerator, including temperature control, defrost cycles, and compressor operation. The cover protects the electronic components from dust and moisture, ensuring reliable performance.

Causes of a bad electronic control can include electrical surges, wear and tear over time, or exposure to moisture or dust. Faulty wiring or connections can also lead to malfunction.

Symptoms of a bad electronic control include:

• Inconsistent temperature regulation
• Refrigerator not cooling properly
• Unresponsive control panel
• Frequent cycling on and off
• Error codes displayed on the control panel

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Control Board is an OEM replacement part for Frigidaire refrigerators. This component serves as the brain of the appliance, managing and coordinating various functions such as temperature control, defrost cycles, and the operation of fans and compressors. A functional control board ensures the refrigerator maintains optimal performance and energy efficiency.

Control boards can fail due to power surges, electrical issues, or normal wear over time. A malfunctioning board can disrupt the refrigerator's functionality and impact its ability to preserve food effectively.

Symptoms of a bad control board include:

• Inconsistent or incorrect temperatures in the refrigerator or freezer
• Unresponsive controls or display panel issues
• The refrigerator not cooling or running continuously
• Error codes or unusual noises during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Timer is an OEM part for Whirlpool refrigerators. This component is essential for controlling the defrost cycle of the refrigerator, ensuring that the appliance operates efficiently by periodically melting any frost buildup on the evaporator coils. By regulating the defrosting process, the timer helps maintain the optimal temperature and energy efficiency of the refrigerator.

Causes of a bad timer can include electrical malfunctions, wear and tear over time, or exposure to power surges. When the timer fails, the defrost cycle may not run correctly, leading to issues with frost buildup and inefficient cooling.

Symptoms of a bad timer include:

• The refrigerator running continuously without cycling off
• Frost buildup on the evaporator coils
• The refrigerator being too warm or too cold
• The defrost cycle not initiating or running too frequently

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Refrigerator Dispenser User Interface Control Board is an OEM part for Frigidaire refrigerators. This control board operates the refrigerator dispenser functions by directing the release of ice and water during dispensing operations.

Causes of a bad control board include normal component failure over time due to heavy usage, exposure to moisture, or electrical malfunctions in its control circuitry.

Symptoms of a bad control board include:

• Ice or water dispenser not operating properly
• Dispenser panel lights or buttons not working correctly
• Issues with selecting crushed & cubed ice
• Inability to dispense ice or water at all

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Main Control Board Assembly is an OEM replacement part for GE refrigerators. It functions as the central processing hub, controlling all automated operations and cycles within the unit. 

Symptoms of an inadequate main board include:

• Appliance failure to cool or lacking temperature regulation
• Lights, dispensers, or ice makers not functioning 
• Appearance of blinking lights or error codes

Causes can be normal wear over time or exposure to moisture. Heavy use may accelerate the deterioration of electronic circuitry.

This GE refrigerator part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Inverter Board is an OEM replacement part for Whirlpool refrigerators. It is a circuit board that controls the speed and operation of the compressor.

Causes of a faulty board can include liquid damage compromising circuitry over time. Heat fluctuations from cycling compressors may diminish operating lifespan as well.

Symptoms of a problematic inverter board include:

• Fluctuating interior temperatures
• Inoperative fan or cooling module
• Error codes without the ability to reset

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Defrost Timer is an OEM replacement part for Frigidaire refrigerators. Located within the control housing inside the fresh food section, it controls the defrost cycles to clear frost from the evaporator coils.

Causes of timer malfunction include: cracking/fatigue of plastics from extended usage; breakdown of delicate electronic components over many years of operation; and failures inhibiting regulated defrost intervals.

Symptoms of a failed defrost timer include:

• Refrigerator fails to automatically initiate scheduled defrost periods
• Frost/ice builds up excessively on evaporator coils obstructing airflow
• Erratic refrigerator temperatures as heat exchange degrades
• Refrigerator stuck in the defrost cycle
• Compressor is not running

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore ranges.

The Compressor Inverter Board is an OEM part for GE refrigerators. It controls the operation of the compressor, adjusting its speed to optimize cooling efficiency and energy consumption. This component is crucial for maintaining consistent temperatures inside the refrigerator and ensuring smooth, reliable performance.

Causes of a bad compressor inverter board can include electrical surges, overheating, or component failure due to wear and tear. When the inverter board malfunctions, it can lead to inadequate cooling and increased energy usage.

Symptoms of a bad Compressor Inverter Board include:

• Refrigerator not cooling properly
• Unusual noises coming from the compressor
• The compressor running continuously or not running at all
• Error codes or flashing lights on the control panel

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Defrost Control Board is an OEM replacement part for Whirlpool refrigerators. This circuit board coordinates defrost heating cycles to remove built-up frost from evaporator coils.

Causes relate to water damage following leaks, component failure due to power surges loosening connectors, or general component wear over time.

Symptoms of issues include:

• Frost accumulation on interior freezer walls reducing capacity
• Food freezing underneath heavy buildup layers
• Inoperable heating element failing to restore airflow

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Dispenser Control Board is an OEM part for Frigidaire refrigerators. It is located behind the control panel of the refrigerator and communicates with other components to activate the dispenser mechanisms. It enables the user to select and dispense ice or water as desired.

Causes of a faulty dispenser control board can include electrical malfunctions, component failure, or improper handling. These factors can result in issues such as the dispenser not responding to user input, incorrect dispensing amounts, or complete failure of the dispenser functions.

Symptoms of a bad dispenser control board may include:

• Inability to dispense ice or water
• Incorrect dispensing amounts or inconsistent operation
• Error codes or flashing lights on the dispenser panel

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Defrost Control Board is an OEM part for GE refrigerators. This component manages the defrost cycle, ensuring that the refrigerator and freezer compartments remain frost-free and maintain optimal cooling performance.

Causes of a bad defrost control board can include electrical surges, component failure due to wear over time, or damage from moisture exposure. A faulty board can lead to inefficient defrost cycles or prevent the defrost process from occurring altogether.

Symptoms of a bad Defrost Control Board include:

• Frost buildup in the freezer
• Refrigerator or freezer not cooling properly
• Frequent cycling of the defrost heater
• Water leaks inside the refrigerator

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dispenser Control Board Kit is an OEM part for Whirlpool refrigerators. This kit includes the control board responsible for regulating the functions of the dispenser, such as dispensing water and ice, and often includes associated wiring and components for installation.

Causes of a bad dispenser control board can include electrical surges, wear and tear over time, or exposure to moisture, which can interfere with the electronic controls.

Symptoms of a bad dispenser control board kit include:

• The dispenser not responding to inputs
• Inconsistent or no dispensing of water or ice
• Display errors or malfunctioning indicator lights
• The dispenser operating erratically or not at all

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Main Control Board Assembly is an OEM replacement part for GE refrigerators. This board controls and monitors all critical functions including temperature regulation and cycle operation.

Symptoms of a bad control board include:

• Refrigerator failing to cool or freeze properly
• Door alarms or error codes displayed
• Lights or other features ceasing to operate

Causes can be short circuits, liquid damage to circuitry, or failure of electronic components due to prolonged use. Defects are often not repairable and replacement is necessary.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.