Need Help?
Call or text
Show parts
This part is discontinued by the manufacturer and is no longer available for purchase.
Usually ships within 4 - 14 days
Tubular fastener bushing for refrigerators. Secures and stabilizes internal components. Replace if cracked, broken, or missing to restore proper fit.
Includes 2 door handles.
Ice dispenser door won't open or solenoid buzzing? This door solenoid assembly controls the ice chute flapper. Moderate DIY repair with video guide.
This control board comes with 2 slide switches and is mounted in the dispenser area.
Secures the ice chute flapper in your refrigerator door. Replace if cracked or missing to restore proper sealing and prevent frost buildup. Verify fit.
Color: Black.
Ice dispenser door assembly seals the ice chute opening on your refrigerator. Replace if cracked, warped, or the rubber gasket is damaged and leaking air.
The Ice Door Spring is an OEM part compatible with GE refrigerators. It is responsible for providing tension and support to the ice chute door, allowing it to open and close smoothly. When you activate the ice dispenser, the spring helps to release the door and allow the ice to pass through. After dispensing, the spring assists in closing the door to prevent cold air leakage and maintain the desired temperature inside the refrigerator.
You should replace the ice door spring if it loses tension or breaks, which can happen due to regular wear and tear, frequent use, or accidental damage. A faulty spring can lead to issues with the ice dispenser's operation and overall efficiency.
Symptoms of a bad ice door spring may include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replace missing or stripped mounting screws in your washer dryer combo. This 12-pack secures panels, components, and internal parts during assembly or repair.
Links the dispenser solenoid to the ice chute door in your refrigerator. Replace if the crank is broken, cracked, or worn, preventing proper closure.
Secures wire harnesses in your refrigerator. Replace if broken, cracked, or wires are loose. Confirm fit with your model number before ordering.
Connects water supply tubing sections in your refrigerator. Replace this plastic compression union if it's cracked, leaking, or broken. Installs inline.
Replacement mounting screw for refrigerator components. Installs to secure panels, brackets, or internal parts. Needed when screws are stripped or missing.
Set of 12 size 8-18 mounting screws for dishwashers. Replaces lost, stripped, or missing screws for secure installation of handles and components.
Snugger module for side-by-side refrigerators. Secures and positions dividers or deflectors. Replace if cracked, broken, or missing for proper fit.
Reversible door plug fills unused mounting holes when switching refrigerator door swing direction. Replaces broken or missing plugs for a finished look.
Replace the end cap trim on your refrigerator door handle. This decorative trim piece covers the handle end and may need replacement if cracked or missing.
Replacement butter dish with cover for refrigerator door storage. Installs in dairy compartment. Needed when original is cracked, broken, or missing.
Replacement mounting screws for refrigerator assembly and repairs. Use when original screws are stripped, missing, or damaged during maintenance work.
Replacement 8-18 x 9/16 machine screw for securing panels, brackets, and internal components. Needed when fasteners are stripped, missing, or worn.
Replacement wire shelf for refrigerator freezer compartment. Installs to hold frozen food items. Order if your original shelf is broken, cracked, or missing.
Replace missing or stripped mounting screws in your washer. This 8-18 x .375 screw secures components and panels during installation or repair.
Ice buildup in freezer? This defrost heater and thermostat assembly melts frost from evaporator coils. Moderate DIY repair restores proper cooling.
Fridge not cooling but freezer works? Ice buildup on evaporator coils? This defrost thermostat regulates defrost cycles. Easy 5-15 minute DIY fix.
Freezer coils frozen over or fridge not cooling enough? This defrost timer controls the defrost cycle. DIYers report 30-minute repairs with video help.
Lower fresh food section.
This low-side wiring harness provides the factory-style electrical connections for the refrigerator's lower compartment, restoring secure power and signal routing to affected components. It replaces a damaged or worn low-side harness to help return normal operation. What it does:
Secures water and drain tubing to prevent leaks, noise, and vibration. Replace if loose, cracked, or missing. Confirm fit with your model number.
Rubber grommet seals the ice maker fill tube where it enters the refrigerator cabinet. Replace if cracked, brittle, leaking, or missing to restore seal.
Replaces the outer housing that supports your refrigerator's ice crusher and dispenser chute. Order a new housing if yours is cracked or broken.
Pack of 12 washers for refrigerator ice crusher auger assembly. Replace worn, cracked, or missing washers during ice maker repairs and maintenance.
E-style retainer ring secures ice maker auger components. Replace when worn or damaged to restore ice dispensing. Confirm fit with your model number.
Replacement pivot that supports and aligns refrigerator doors or drawers. Needed when original pivot is cracked, broken, or worn, causing misalignment.
This replacement part is an ice dispenser deflector, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice dispenser deflectors are found inside of the ice-making assembly and are an important part of many freezers. The ice dispenser deflector allows the ice to come down from the tray into the dispensing area. A new ice dispenser deflector might be needed if the current one has become too brittle and has even cracked or broken. Be sure that the refrigerator is completely powered off before starting this repair. The user must have access to the ice maker assembly and will need common household tools like a screwdriver and pliers. The user might also need working gloves as some parts in and around the assembly have sharp edges or blades.Note that this part is sold individually. This ice dispenser deflector is sourced directly from the manufacturer and is a genuine OEM replacement part.
Ice not dispensing or jamming? This ice dispenser auger blade moves ice from the bin to the chute. Installs in numbered sequence with spacers.
Fix ice dispensing issues with this refrigerator auger blade. Solves crushed ice not dispensing or jamming problems. Moderately easy DIY repair part.
Ice won't crush and gets stuck between blades? This moving dispenser blade restores crushing function. Simple DIY fix for side-by-side refrigerators.
Mounting spacer maintains proper clearance between refrigerator panels, doors, or components. Replace if cracked, broken, or missing to restore fit.
Supports and centers the ice crusher blade assembly in your refrigerator. Replace if cracked, worn, or missing to prevent blade wobble and noise.
Display not aligned or overlay loose? This stationary blade secures the front display panel, keeping controls and indicators properly positioned and visible.
Plate for dispenser.
Ice not dispensing or auger jammed? This rear ice dispenser helix connects the motor to the crusher blade. Moderately easy DIY fix for most models.
This replacement part is an ice auger blade, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice auger blades are usually found in ice maker assemblies and are used during the ice-making and dispensing process. These blades are what are used when the user is in need of shaved or crushed ice. The mechanism takes full ice cubes and cuts the ice cubes down to create the different types of ice. A new ice auger blade might be needed if the user noticed that the current blades are dull or unable to cut ice. It is possible that the blades become dull over time after many years of use, so replacing them might be a good idea. Be sure the power is completely off before attempting to repair this part.This ice auger blade is sourced directly from the manufacturer and is a genuine OEM replacement part. Note that this part is sold individually.
The Drive Cup is an OEM part for GE refrigerators. This part engages with other parts to drive the ice out of the molds and into the storage bin.
Causes of Drive Cup failure can range from physical wear and tear from regular use, which may lead to cracks or deformities in the part, to accumulation of frost or ice that hinders its movement.
Symptoms of a malfunctioning Drive Cup include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Seals the ice bucket to prevent spills, frost buildup, and water pooling. Replace when ice shifts or water collects. Confirm fit with your model.
Includes 12 clips.
Ice dispenser not working or making humming noise? This auger motor drives the crusher mechanism to feed ice through the chute. Moderate DIY repair.
Drives the auger to push ice from bin to chute. Replace if ice won't dispense or motor jams. Verify fit with your model number before ordering.
Mounting bracket that secures the ice dispenser solenoid in place. Replace if cracked, broken, or missing to restore proper solenoid alignment and function.
Ice dispenser only making crushed ice instead of cubes? This solenoid valve kit fixes the cube/crushed ice selector. Easy DIY repair with video guide.
Ice dispenser stuck on crushed or not dispensing? This armature kit connects the solenoid to the chute door. Moderate DIY repair with video guide.
Foam gasket block seals gaps in your refrigerator to maintain temperature efficiency. Replace if worn, compressed, or causing air leaks. Confirm fit with your model number.
Mullion air duct that directs airflow between refrigerator compartments. Replace if cracked, broken, or missing to restore proper air circulation.
Refrigerator light not working or flickering? A faulty light socket often causes this. Simple plug-in repair with no tools required. Video guide available.
Replaces the air duct in your refrigerator that channels cold air between compartments. Order a new duct if yours is cracked, broken, or missing.
Plastic air duct that directs cold air from the freezer to the fresh food compartment through the mullion. Replace if cracked, broken, or missing.
Meat pan temperature fluctuating or not cooling properly? This control assembly regulates airflow to your meat keeper drawer. Moderate DIY repair.
Seals the evaporator drain pan cover to channel condensation properly and prevent leaks. Replace if you notice moisture buildup under your unit or a loose pan cover fit. Confirm compatibility with your refrigerator model before ordering.
Left hand side
Right hand side
Slide bearing for refrigerator drawer rails. Enables smooth in-and-out drawer movement. Replace if cracked, worn, or causing drawers to stick or jam.
Right side drawer slide rail for refrigerator crisper and produce drawers. Replace broken, cracked, or damaged rails that no longer support smooth drawer movement.
Left-hand drawer slide rail for refrigerator crisper or sealed pan drawers. Replace cracked, broken, or damaged rails for smooth drawer operation.
Left-hand slide rail for refrigerator drawer assemblies. Guides crisper bins smoothly in and out. Replace if cracked, broken, or drawer won't glide properly.
Right-hand drawer slide assembly for refrigerator crisper and meat pan drawers. Replace if cracked, broken, or causing drawers to sag or drop.
Bearing bushing for refrigerator mechanical components. Replace this support part if cracked, worn, or broken to restore proper alignment and function.
Refrigerator shelf stop prevents shelves from sliding too far forward. Replace if cracked, broken, or missing to keep shelves secure and stable.
Left side shelf stop for refrigerator spillproof shelves. Prevents shelf from sliding too far. Replace if cracked, broken, or missing. Direct fit.
Cantilever shelf for side-by-side refrigerators. Replaces cracked, broken, or damaged shelving. Slides out for easy access to stored items.
Replacement mounting screw for refrigerator panels, brackets, and hardware. Restores secure fit when original is missing, stripped, or corroded.
Replacement mounting screw for refrigerator interior or exterior components. Needed when original screw is stripped, missing, or damaged during repairs.
Package of 12
Mounting screw for securing range components and panels. Replace if missing, stripped, or corroded. Package includes 12 screws for installation.
Freezer light not turning on or off? This door light switch activates interior lighting when opened. Moderate DIY repair—press tab, rotate out old switch.
The Evaporator Fan Motor Kit is an OEM part compatible with GE refrigerators. It is a critical component responsible for circulating air and maintaining proper airflow within the refrigerator's evaporator system, ensuring efficient cooling and temperature regulation. It features a shaft that measures 3/8 of an inch and two right-side terminals. Notably, the motor no longer comes with harness wires, which must be obtained separately for installation.
Symptoms of a faulty evaporator fan motor include:
Causes of a bad evaporator fan motor can include wear and tear over time, electrical issues or short circuits, or physical damage from foreign objects or improper maintenance.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
Freezer not cooling or making buzzing noise? The evaporator fan blade circulates cold air. Easy DIY fix in under 5 minutes—simply pull off and press on.
The Fan Blade Grommet is an OEM replacement part for GE brand refrigerators. Located behind the evaporator fan blade where its central shaft passes through, this rubber sealing piece creates a protective barrier isolating the fan assembly.
Causes of a potentially problematic fan blade grommet include cracks or deterioration that develop from continuous vibration and impacts over extended use. Exposure to temperature fluctuations can also cause the rubber to harden and lose elasticity.
Symptoms of a faulty fan blade grommet include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore model refrigerators.
Secures refrigerator wiring to prevent chafing and vibration noise. Replace when damaged or missing to keep harnesses organized. Confirm fit by model.
Supplies electrical power from wall outlet to refrigerator. Replace this cord if cut, frayed, overheated, or damaged to restore safe electrical connection.
Refrigerator not cooling or compressor overheating? A failed condenser fan motor is often the cause. This repair takes about 10 minutes with basic tools.
Replace missing or stripped dishwasher mounting screws. Secures internal components and panels. Essential hardware for reassembly after repairs.
Panel mounting screw for refrigerators. Secures access panels, trim pieces, and internal brackets. Replace lost, stripped, or corroded fasteners.
Replace missing or stripped mounting screws in your refrigerator. This 12-pack of 8-32 thread screws secures panels, brackets, and components.
Replacement mounting screw for securing panels, trim, and internal brackets. Needed when original fasteners are missing, stripped, or damaged.
Fix loud banging or chugging noises from your refrigerator compressor. This complete compressor kit replaces worn internal components causing noise.
Fix a refrigerator that won't start or clicks repeatedly. This compressor capacitor stores energy to start the motor. DIY repair typically takes 30 minutes.
This part has been discontinued by the manufacturer and is no longer available.
Refrigerator clip secures components in place. Replace if broken, loose, or causing rattling noises. Verify fit with your model number before ordering.
Replacement shelf support stud for refrigerator shelves. Installs to hold shelves in place. Needed when original stud is broken, cracked, or missing.
Filter drier for refrigerator sealed systems. Removes moisture and contaminants from refrigerant. Replace if frozen, iced over, cracked, or restricted.
Replacement mounting screw for securing panels, trim, and internal components in appliances. Needed when original screws are stripped, lost, or damaged.
Self-adhesive foam insulation strip for refrigerator door or cabinet sealing. Replaces worn, compressed, or missing foam strips that affect insulation.
Fix a leaking water valve or non-working ice maker and water dispenser. This dual inlet valve controls water flow to both systems. DIY-friendly repair.
Compression nut for 1/4 inch refrigerator water tubing. Replace worn, cracked, or leaking nuts on water supply lines. Installs on valve connections.
Secures water tube to cabinet, preventing kinks and flow issues. Replace if tube is loose, vibrating, or causing noise. Confirm fit with your model number.
Internal water storage reservoir for refrigerator dispensers. Installs inside the fresh food compartment. Replace if cracked, leaking, or split.
Plastic tube that connects the water tank to the dispenser and ice maker. Replace if cracked, leaking, or damaged to restore proper water flow in your fridge.
This part has been discontinued and is no longer available
Replacement mounting screw for refrigerator assembly. Secures panels, shelves, or components inside your unit. Needed when original is stripped or missing.
Replacement door closure spring for refrigerator hinges. Installs on door hinge assembly to provide tension for proper closing. Needed when broken or worn.