Washer Latch, Catch, Lock Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11670519
Replacement lid lock for top-load washers. This 120V assembly secures the lid and reports its status to the control, restoring safe operation, proper spin speeds, and normal cycle progress when the original latch becomes intermittent or fails.
- Locks the lid during spin and agitation for user safety
- Detects lid position and sends closed/locked status to the control board
- Helps the washer reach and maintain proper spin speeds
- Common failure symptoms: lid won't lock/unlock; lid lock light flashing
- What's included: 1 lid lock assembly
Install notes:
- Disconnect power before servicing
- Access the lock at the top/front rim; remove fasteners and the connector, then swap the assembly
- Route wiring exactly as original and secure it to avoid pinching or chafing
- Verify lid strike alignment and run a short test cycle to confirm lock operation
More
$53.95
- Compare At:
-
$64.20
- You Save:
-
$10.25
Genuine Lg part
By: Lg
Part Number: MFG62439301
Fix DE door error codes or doors that won't latch with this washer door latch hook. Simple 15-minute DIY repair with video guide. Secures door during cycles.
Do-It-Yourself Stories from Customers like You
LG front loader door error DE Phil P. • Fort Myers , FL • July 05, 2019
Changed out door switch and door latch hook. Watched video it was so easy. Appliance Parts Pros save me hundreds of $$$$. This is the 3rd time I used this company I must say they are the best.
Read more
More
$32.95
- Compare At:
-
$39.21
- You Save:
-
$6.26
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10375379
Washer won't start or shows F28 error? Door lock keeps washer secure during cycles. Moderate DIY repair, takes about 15 minutes with door boot removal.
Do-It-Yourself Stories from Customers like You
Door lock was broken Kerry K. • Clyde , TX • August 23, 2015
ORDERED IN DOOR LOCK FROM ApplianceParts .received part next day. ( Great delivery time!) went down and installed on my washer at the Laundry.Took about 15min to install. I had very little down time at my business.
Read more
More
$161.95
- Compare At:
-
$192.72
- You Save:
-
$30.77
Genuine Ge part
By: Ge
Part Number: WH10X10006
If your washer won't start, beeps with door open errors, or the door won't lock, this door lock assembly fixes the issue. Takes about 15 minutes to install.
This part fixes the following symptoms
-
Lid or door will not open
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Door locked rendering the washing machine unusuable R R. • Buckeye , AZ • April 05, 2016
Went on line general information made me realise I needed to replace the door lock.Signed into appliancepartspros.com found the part and ordered it. That took about 5 minutes. A day and a half later the part arrived at my home. Repair took about 15 total minutes machine works like new again.
What a pleasure to have appliance parts pros for obtaining parts at a reasonable price with prompt delivery.
Read more
More
$193.51
- Compare At:
-
$230.28
- You Save:
-
$36.77
Genuine Whirlpool part
By: Whirlpool
Part Number: W10814230
This cam fits between the refrigerator door and hinge to create smooth, controlled movement and a self-closing feel. Replacing a worn cam restores proper door alignment and gasket contact to help maintain temperature and reduce frost or moisture.
- Works with the hinge to guide door movement and provide a detent/self-close action
- Helps keep the door aligned for an even gasket seal and smoother opening/closing
- Worn cam symptoms can include clicking/popping at the hinge, a door that sags, swings open, or won't fully close without lifting/pushing
- Contribute to temperature fluctuations or condensation if the door doesn't seal consistently
What's included: 1 cam Install notes:
- Disconnect power; unload and support the door to prevent damage
- Remove hinge cover and fasteners; lift the door as needed to access/replace the cam
- Note cam orientation and reuse original hardware, spacers, and shims
- Adjust leveling/hinge if needed
Do-It-Yourself Stories from Customers like You
Lid switch was not turning on, washer filled but didn't wash spin etc George J. • Hopewell , IL • March 02, 2020
I replaced the switch, the plunger, plunger guide and the lid cam, but the cam still didn't turn on the switch. Turned out someone had stood on the washer and bent the lid slightly, not enough to notice, but since I had ruled out just about everything else I started looking at the lid itself. I ended up bending it back close to it's original shape and now it works fine. I guess I learned a few things about washing machines though. One lesson is when you pull off the controls, the hose leading...
Read more
More
$9.41
- Compare At:
-
$11.10
- You Save:
-
$1.69
Genuine Frigidaire part
By: Frigidaire
Part Number: 134629900
Fix a washer that won't start or run because the door won't lock. This door lock assembly secures the door during wash cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Washer door lock and latch James J. • Ararat , VA • March 12, 2016
Ordered new parts from appliancepartspris.com
Read more
More
$111.49
- Compare At:
-
$133.79
- You Save:
-
$22.30
Genuine Frigidaire part
By: Frigidaire
Part Number: 134936800
If your washer won't start or the lid won't unlock, the lid lock switch may have failed. This DIY repair typically takes 10-15 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
The locking mechanism would not release the lid had to break it to open Dennis H. • Bridgeton , NC • January 10, 2015
1) Ordered part.
2) Removed front panel by loosening the two screws at the bottom front.
3) Removed old Safety Switch/Lid Lock by disconnecting wires (plug and 2 female disconnects)
4) Reconnected all wires and reinstalled switch.
5) Replaced front panel.
6) Tested Unit.
7) FYI - I found that the locking mechanism stays locked until cycle completely finishes on its own. DO NOT force the cycle to end. Lid will NOT unlock.
Read more
More
$78.95
- Compare At:
-
$94.74
- You Save:
-
$15.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 137353300
This washer door lock secures the door closed and communicates locked status to the control so cycles can run safely. Replacing a failed lock restores proper latching and may resolve no-start, spin, or door/lock error issues.
- Locks the door at the start of the cycle to prevent opening during wash and spin
- Signals the control when the door is closed and locked
- Releases the door at the end of the cycle
- Common symptoms: won't start, door won't lock/unlock, intermittent pauses, door/lock error message
What's included: One door lock assembly Install notes:
- Unplug the washer before servicing
- Access the lock from the front; remove the door gasket clamp and mounting screws (procedure varies by model)
- Transfer wires to the new lock one connector at a time; do not force terminals
- Verify the door striker engages smoothly and test an empty cycle before full use
Do-It-Yourself Stories from Customers like You
Our washer was randomly stopping, in some not all cycles with weight on the lid some cycles could finish. Michael H. • Reading , PA • March 28, 2022
Replacing the cycle switch and the lid switch, resolved the issues! Our washer operates like new again. From receipt of the parts to the first wash. The replacement of the parts took less than 20 minutes! Savings over the purchase of a new washer dryer combo: $1700-2200!
Read more
More
$77.95
- Compare At:
-
$92.76
- You Save:
-
$14.81
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006900
Pedestal drawer won't stay closed? This door strike engages the latch to keep the drawer securely shut. Simple DIY fix takes about 15 minutes to install.
Do-It-Yourself Stories from Customers like You
The electrolux pedestal drawer would not latch and stay closed. Paul N. • Dover , MA • December 08, 2017
Went on line to Appliance Parts Pros Brought up the parts diagram located the new latch and prong for the drawer.
My new parts arrived in 2 days installed the parts put the drawer assembly back together closed the drawer all all is fine.
I have another pedestal drawer under the washer all the same age so I ordered a spare fully knowing I will need it sooner or later.
Read more
More
$11.95
- Compare At:
-
$14.34
- You Save:
-
$2.39
Genuine Speedqueen part
By: Speedqueen
Part Number: 203573
Fix a washer lid that won't latch or lock during cycles with this lid lock catch assembly. Simple DIY repair requiring basic tools and screwdriver.
Do-It-Yourself Stories from Customers like You
The top of my speed queen had rushed really badly it was staining my clothes Sue T. • Wilmington , NC • February 28, 2026
My son-in -law replaced the entire lid and top along with the lid lock and safety lock on the lid. He has pictures of the process
Read more
More
$22.06
- Compare At:
-
$23.45
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002754
Fix a washer that won't start when the lid is closed with this lid switch plunger. Simple DIY repair—just remove two screws and realign. Video included.
Do-It-Yourself Stories from Customers like You
Lid switch was not turning on, washer filled but didn't wash spin etc George J. • Hopewell , IL • March 02, 2020
I replaced the switch, the plunger, plunger guide and the lid cam, but the cam still didn't turn on the switch. Turned out someone had stood on the washer and bent the lid slightly, not enough to notice, but since I had ruled out just about everything else I started looking at the lid itself. I ended up bending it back close to it's original shape and now it works fine. I guess I learned a few things about washing machines though. One lesson is when you pull off the controls, the hose leading...
Read more
More
$11.95
- Compare At:
-
$13.16
- You Save:
-
$1.21
Genuine Whirlpool part
By: Whirlpool
Part Number: W11252738
Fix a washer that won't spin or start due to a faulty door strike. This latch component ensures secure lid closure for proper operation. DIY-friendly.
Do-It-Yourself Stories from Customers like You
Would not spin Heather G. • Morganton , NC • December 03, 2018
Replaced Latch
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10192995
Fix a washer that won't start or shows error codes with a new door latch. Restores door engagement and cycle operation. 15-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Door latch not working properly Gary L. • Sisters , OR • January 28, 2017
Remove the 3 screws from the back of the top cover
Pull backward about 2 inches and lift the top off
Reach in and disconnect the the door latch wiring
Remove the 2 screws that hold the latch to the door frame
Pop the latch loose from the plastic holder on the right side by pushing it forward
Replace the switch with the new one and repeat each step in reverse
Read more
More
$131.24
- Compare At:
-
$156.18
- You Save:
-
$24.94
Genuine Whirlpool part
By: Whirlpool
Part Number: W11513250
The Washer Lid Strike is an OEM part for Whirlpool washing machines. It is a metal bracket that secures the washer lid in a closed position during cycles. The lid strike has a spring-loaded arm that catches the lid tab, providing a tight seal and secure closure.
Causes of a bad lid strike can include normal wear and tear over many cycles, damage from repeated impact or mishandling of the lid, or deterioration of components like the springs.
Symptoms of a defective lid strike include:
- The washer lid not latching properly or staying securely closed
- Water leaks around the lid seam
- Error codes related to the lid not locking
- Difficulty opening the lid fully after cycles
This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washers.
More
$6.95
- Compare At:
-
$8.27
- You Save:
-
$1.32
Genuine Whirlpool part
By: Whirlpool
Part Number: W11237158
This bezel is a trim piece that finishes and protects the opening around a control or feature on the appliance's panel. Replacing a cracked or missing bezel restores a clean look and helps the mating control sit securely and operate properly.
- Frames the control or opening and covers raw edges for a finished appearance
- Helps keep the associated knob/button or trim aligned and seated
- Shields internal components from dust, splashes, and minor impacts
- Replace if cracked, warped, loose, or missing; symptoms can include a wobbly control, visible gaps, or cosmetic damage
What's included: 1 bezel Installation notes:
- Disconnect power at the breaker before servicing; allow any hot surfaces to cool
- If applicable, pull off the knob or remove adjacent trim to access the bezel
- Release locking tabs or remove mounting screws carefully to avoid scratching the panel
- Align the new bezel with tabs/orientation marks and snap or fasten into place; reinstall parts and test
Do-It-Yourself Stories from Customers like You
F5 e3 Ivan B. • Eagan , MN • September 11, 2021
Replaced the lock switch and holder. Took under 5 minutes. Best money spend without need to replace machine.
Read more
More
$23.95
- Compare At:
-
$28.50
- You Save:
-
$4.55
Genuine Whirlpool part
By: Whirlpool
Part Number: W11315637
Washer won't start or door won't unlock? This lock cam drives the door lock mechanism to secure and release the door for proper cycle operation.
Do-It-Yourself Stories from Customers like You
The lock cam on the timer switch access panel was vandalsed Matthew R. • Los Angeles , CA • March 13, 2016
I cut off the vandalised Lock-Cam with a reciprocating saw. The new Lock-Cam slipped into place easily.
Read more
More
$44.48
- Compare At:
-
$52.93
- You Save:
-
$8.45