Washer Screws, Nuts, Washers
Genuine Ge part
By: Ge
Part Number: WH02X10083
This motor mounting screw secures the motor to the appliance chassis so the motor stays aligned during operation. It's a direct-fit fastener that replaces worn, stripped, or missing motor screws to restore secure motor mounting. What it does:
- Fastens the motor to the appliance frame to maintain correct motor alignment and stability
- Prevents motor movement that can cause vibration, noise, or premature wear
- Replaces missing, damaged, or corroded motor mounting hardware
- Helps restore reliable operation after motor service or reassembly
What's included: One motor mounting screw Install notes:
- Disconnect power before servicing the appliance to avoid electrical shock or injury
- Use the correct screwdriver or socket to avoid stripping the screw head
- Inspect mating threads and replace any damaged hardware or stripped inserts before final installation
- Tighten to secure fit; avoid over-tightening which can strip threads or crack housings
More
$6.47
- Compare At:
-
$7.12
- You Save:
-
$0.65
Genuine Ge part
By: Ge
Part Number: WH02X10085
$11.52
- Compare At:
-
$12.67
- You Save:
-
$1.15
Genuine Ge part
By: Ge
Part Number: WH02X10199
$7.56
- Compare At:
-
$7.92
- You Save:
-
$0.36
Genuine Ge part
By: Ge
Part Number: WH2X707D
$18.48
- Compare At:
-
$23.95
- You Save:
-
$5.47
Genuine Ge part
By: Ge
Part Number: WH02X10001
Size: 14-10 a trt 7/8 s.
Do-It-Yourself Stories from Customers like You
Water leaking from seal and noisy when spinning. W J. • Panama City Beach , FL • July 26, 2018
Replaced the hub nut, tub bearing split ring, tub seal, hub washer and agitator coupler. I watched multiple times the APP video. It was extremely helpful and I would not have attempted this without seeing the video. I had a lot of trouble getting the hub nut off. I used an 1 5/8" 6 point strike box wrench and a 4# hammer to get it off. I sprayed it with WD 40 5 or 6 times over of the course of a week to let it soak. I finally got it off. Had I known that the shaft is not round I would have...
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH2X42D
12-pack of inlet hose washers for washers and washer dryer combos. Replace cracked, worn, or missing washers to prevent leaks at water connections.
Do-It-Yourself Stories from Customers like You
Hot water wouldnot shut off John M. • Sykesville , MD • January 06, 2018
I called on your service, a person on the phone name Mr.Berry ask what the matter was . I told him the said a water valve should fix it . it sure was the right fix. thank you guys and thank you Mr. Berry.
john m
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH02X10191
Secures panels and brackets in your washer. Replace this fastener if lost, stripped, or damaged to restore a tight fit and reduce vibration or rattling.
More
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4449745
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10128585
Replacement mounting screw for washers. Secures panels, trim, and brackets. Needed when original screws are stripped, missing, or damaged during repairs.
More
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH02X10270
M5-16 metric machine screw secures service panels and internal components in washers. Replace missing, stripped, or damaged screws during repairs.
More
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH02X10334
Replaces a damaged or missing M12 x 25 flange bolt in your washer. Secures panels, brackets, and internal assemblies. Needed when bolts are stripped, broken, or lost during repair.
More
$23.95
- Compare At:
-
$28.50
- You Save:
-
$4.55
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB1X1118
Nickel
Do-It-Yourself Stories from Customers like You
Lower igniter (was not operating David H. • Simpsonville , SC • February 12, 2016
Replacement of the old igniter with new. Also, while the interior was open (burner assembly), I replaced all components with new equipment.
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH02X10217
This silicon controlled rectifier (SCR) is a replacement power-control semiconductor that helps regulate current to heating and motor circuits, restoring proper cycling and output in affected appliances. What it does:
- Controls and switches power to heating elements or motors by gating current flow
- Helps the appliance regulate temperature or motor speed when functioning correctly
- A failing SCR can cause no heat, intermittent heating, or erratic motor behavior
- Designed to mount to a flange with a .625-inch tab for electrical connection
What's included: One SCR power-control module Install notes:
- Always disconnect power at the breaker or unplug the appliance before servicing
- Handle the SCR by its edges; avoid touching terminals and observe ESD precautions when possible
- Verify proper orientation and secure mounting to the heatsink or chassis per the service manual
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH02X10267
5/16-18 tpt ihw s n
Do-It-Yourself Stories from Customers like You
Noise when aggitating (scraping) unbalanced spin outs caused by the nylon cuopling wear down Rene*moeller M. • Stafford , VA • February 02, 2015
Replaced the Coupling Pulsator, and the Pulsator (short spindle in the center of the washer). The only problem that I encountered was how to remove the short spindle in the center of the washer...my fabric softer is in the center and you need to open that, grab the middle and loosen by turning left. Once that is out you will use a 7/16th socket and remove the entire agitator. Most of the videos show that you pull that straight up to remove - not the short one. There is still a screw to remove....
Read more
More
$4.81
- Compare At:
-
$8.36
- You Save:
-
$3.55
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00160654
$9.46
- Compare At:
-
$10.41
- You Save:
-
$0.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00160655
$3.95
- Compare At:
-
$4.70
- You Save:
-
$0.75
Out Of Stock
Usually ships within 4 - 14 days