Cooktop Burner & Related Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 316404901
Burner won't light or flame is weak? This gas valve controls flow to your range surface burner for reliable ignition and heat control. Moderate DIY.
Do-It-Yourself Stories from Customers like You
Leak detected in my original valve John T. • Warren Center , PA • December 24, 2016
Replaced the old valve with a new one from AppliancePartsPros.com. I watched one of the YouTube videos to get an idea of what the process would entail. I gathered the tools I would require, plus a work light. The repair/replacement went pretty good. One thing the video I watched didn't cover was adjusting the valve for a propane system. I compared my old valve to the new one and saw that I would have to screw down the oven gas outlet until it "bottomed out".
Read more
More
$230.95
- Compare At:
-
$277.14
- You Save:
-
$46.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 316536622
Replace this ignitor orifice assembly if the electrode is cracked, broken, or worn. Installs on gas range surface burners to restore spark ignition.
Do-It-Yourself Stories from Customers like You
Burner wouldn’t ignite. David B. • Darien Center , NY • February 08, 2022
Installed a new ignitor/orifice assembly.
Read more
More
$122.95
- Compare At:
-
$147.54
- You Save:
-
$24.59
Genuine Whirlpool part
By: Whirlpool
Part Number: W11050487
Regulates gas flow to surface burners on gas ranges. Replace if bent, broken, cracked, or leaking. Located beneath burner caps on the cooktop surface.
Do-It-Yourself Stories from Customers like You
My orifice holder lines were leaking gas when you lift lid to clean be careful with your gag lines!. Richard L. • Shreveport , LA • May 26, 2023
We replaced both front orifice holders. Very easy to bend and break. If it has a deep bend in it, It will slow down the gas flow to the burner. if you have a low gas flow your burner will burn low So check your small silver gas lines and if you smell gas check your lines
Read more
More
$59.48
- Compare At:
-
$71.38
- You Save:
-
$11.90
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304506427
Replacement top burner for gas ranges. Installs on the cooktop surface to provide flame for cooking. Order if your burner is rusted, eroded, or broken.
Do-It-Yourself Stories from Customers like You
The front burner rusted off so we replaced all the burners Anna P. • Bath , NY • November 29, 2017
We took the old ones off and put the new ones on..it was easy to do ..I want to say that the girl (I think her name was Heidi) she was a big help ,she made sure that I had the right parts,I ask her to show me the picture to make sure that they look like the part ..She was a really big help. I did a survey when I ordered the parts to..Thank you for your help and the parts Anna P
Read more
More
$78.27
- Compare At:
-
$92.36
- You Save:
-
$14.09
Genuine Ge part
By: Ge
Part Number: WB16X24723
The Burner, Large V2 is an OEM part for GE gas ranges. It is designed to provide a consistent and even flame for cooking, ensuring efficient heat distribution for large pots and pans.
Causes of a bad burner can include clogging from food spills, wear and tear from frequent use, or damage from cleaning processes. A malfunctioning burner can lead to uneven cooking and reduced heating efficiency.
Symptoms of a bad burner include:
- Uneven or weak flame
- Burner not igniting properly
- Sputtering or inconsistent flame
- Visible damage or clogging on the burner surface
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Burner elements needed replacement Nadine L. • Kingsland , GA • November 02, 2025
Remove and replace
Read more
More
$41.95
- Compare At:
-
$49.92
- You Save:
-
$7.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3412D024-26
This is a replacement sealed burner cap. This is a genuine OEM part made by Whirlpool and has been sourced directly from the manufacturer. This part is intended to replace a broken, misplaced, or defective burner cap in various models of gas ranges and stoves. Electrodes are included.This sealed burner cap protects the surface burner and allows the cooktop to light properly. If the gas igniter is glowing but does not ignite, the stove won't start up, or there will be a gas smell. Proper tools may be required to replace this part. Always ensure the appropriate safety precautions are adhered to when attempting to fix any appliances. Make sure that the stove is entirely disconnected from gas and power before starting the repair work. For more accurate information on how and where to install this sealed burner cap, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this burner cap is suitable for use on several different models of gas stoves, ranges, and cooktops manufactured by Whirlpool, Maytag, KitchenAid, Amana, and other Whirlpool brands. This is a genuine part made of high-quality, durable materials and is sold individually.
Do-It-Yourself Stories from Customers like You
Burner rusted out inside Timothy K. • Bayville , NJ • September 06, 2014
These are very easy to replace ,just gave the old one a quarter turn lifted it out took the two wires off (noted where each one will go on the new burner ) pop the wires onto the new burner put it on and good to go.
Read more
More
$59.48
- Compare At:
-
$71.38
- You Save:
-
$11.90
Genuine Samsung part
By: Samsung
Part Number: DG62-00111A
Replacement burner cap for gas ranges. Covers the burner head and distributes heat evenly. Order a new cap if yours is cracked, faded, or missing.
Do-It-Yourself Stories from Customers like You
Missing burner caps Anthony B. • Marlboro , NJ • July 21, 2015
Ordered new/replacements, excellent chat on line, Quick turn around delivery.
Thank you
Will recommend to friends.
Read more
More
$59.48
- Compare At:
-
$70.78
- You Save:
-
$11.30
Genuine Whirlpool part
By: Whirlpool
Part Number: W11126051
The LP Bake and Broil Kit is an OEM replacement part for Whirlpool ranges. It is a kit containing everything needed to convert the oven from Natural gas to LP.
Causes of a bad bake/broil system can include cracks, leaks, or corrosion in gas lines that produce unsafe flames over time. Pilot lights may fail to light consistently.
Symptoms of failures include:
- Inability to ignite bake/broil burners
- Erratic or intermittent baking temperatures
- Uneven cooking due to improper burner positioning
- Strong gas or chemical smells from the oven
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
I purchased the appliance used and it was set up to use natural gas, I needed it to run on propane. Belton T. • Round O , SC • September 08, 2018
I purchased a burner and a oven orifice replacement kit from Appliance Parts Pros. I downloaded an installation manual from Whirlpool and followed the instructions. It was pretty easy. The front burner orifices could be replaced by just taking off the burner cover. The back ones required removing the burner diffuser. You will need to reattach the back burner bottom assembies after you remove the diffuser before you unscrew the orifice or it might bend the burner piping causing it to not line up...
Read more
More
$107.38
- Compare At:
-
$126.71
- You Save:
-
$19.33
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10183369
Black burner cap sits on top of the burner head to distribute flame evenly. Replace if cracked, chipped, missing, or discolored from heat and spills.
Do-It-Yourself Stories from Customers like You
Missing flame diffusers Kohle K. • Portland , OR • March 01, 2015
These guys had exactly the parts I needed. We're quite expensive, but they arrived quickly and were a perfect fit!
Read more
More
$57.39
- Compare At:
-
$68.29
- You Save:
-
$10.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10170516
The LP Orifice Kit is an OEM part for Whirlpool gas ranges. It contains a set of five orifices designed specifically for use with liquid propane (LP) gas. Note: For the oven orifices, on some models they are adjustable and some they are not. Refer to parts list for your model when oven orifices are needed. LP orifice kit includes 5 orifices.
Causes of a bad LP Orifice Kit may stem from incorrect orifice size for the specific LP gas supply, wear or damage to the orifices over time, or improper installation.
Symptoms of needing to replace the LP Orifice Kit can include:
- Uneven heating or incomplete combustion of the burners
- Yellow or flickering flames instead of a steady blue flame
- Reduced cooking performance or inefficient heating
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
I needed to change out the stovetop gas orifices going natural gas to propane James G. • Fort Lauderdale , FL • September 12, 2015
Changing out the stovetop orifices from natural gas to propane-
First thing, turn off the gas.
On this model stove, there are five burners-two burners in the front, two in the back and one in the middle. The front two burners are different than the other three, they are the largest burners. You can use a 11/32 socket with an extension to go down the middle hole of the burner and screw-out the natural gas orifices.
Taking the orifices out was easy. Putting the new orifices in is a different...
Read more
More
$53.21
- Compare At:
-
$62.79
- You Save:
-
$9.58
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10183368
Black burner cap sits atop gas burner to direct flames evenly. Replace if cracked, chipped, missing, or stolen. Fits left and right front burners.
Do-It-Yourself Stories from Customers like You
Bought floor model and it didn't include burner caps Angie L. • Valley Park , MO • April 07, 2023
Ordered caps and self installed.
Read more
More
$62.61
- Compare At:
-
$74.51
- You Save:
-
$11.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10183370
The Cap-Burner (Black) is an OEM part for Whirlpool gas ranges and cooktops. This burner cap sits on top of the right rear burner head and helps distribute the flame evenly for efficient cooking. It also protects the burner head from spills and debris, ensuring proper functionality and longevity of the burner.
Over time, burner caps can become damaged or worn out due to constant exposure to high temperatures, spills, and regular cleaning. A bad burner cap can lead to uneven flames, poor cooking performance, and potential damage to the burner head.
Symptoms of a bad burner cap include:
- Uneven or irregular flame
- Flames that are too high or too low
- Difficulty igniting the burner
- Visible cracks or discoloration on the cap
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
We bought a display model and it didn't have any of the burner caps or racks. Angie L. • Valley Park , MO • April 01, 2023
JUST ORDERED THE PARTS AND THEY INSTALLED THEMSELVES.
Read more
More
$55.30
- Compare At:
-
$66.36
- You Save:
-
$11.06
Genuine Ge part
By: Ge
Part Number: WB29X43469
Replacement burner cap for 18K high-output burners. Sits atop the burner head to shape and distribute the flame. Replace if cracked, chipped, or worn.
Do-It-Yourself Stories from Customers like You
One of the burners lost a piece of metal when heated Charlene C. • Vienna , VA • September 08, 2015
I replaced all the burner tops
Read more
More
$33.35
- Compare At:
-
$37.06
- You Save:
-
$3.71
Genuine Bosch part
By: Bosch
Part Number: 00415498
Jet holder securely houses the orifice assembly on gas range burners. Replace if cracked, corroded, or heat-damaged. Ensures proper gas flow and ignition.
Do-It-Yourself Stories from Customers like You
Left rear variable simmer gas burner on thermador prg364glus stopped working David B. • Lincoln , NE • February 23, 2017
First and foremost, don't believe everything you see on Youtube. In order to get to the gas solenoid that feeds the burner you MUST take the entire top off that side of the range. Remove the grates and burner tops. You will see 2x 20mm brass nut, or so it appears, that hold each burner in place on the splash/drip pan. It is not just a nut, it is a venturi that threads down into what is called the jet holder. You may get a socket on it and think you are getting it loose but, more than likely you...
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8286814
Replacement burner head for gas cooktop semi-rapid burners. Sits atop the burner to shape and direct the flame. Replace if discolored, corroded, or worn.
Do-It-Yourself Stories from Customers like You
I ruined every burner because I soaked them in a covered bowl filled with ammonia. I have never covered the bowl in the past! The ammonia gently removes any stains on the chrome Barbara L. • La Quinta , CA • March 05, 2020
I immediately turned to Appliance Parts Pros and got the best price for 4 new burners and finding parts for my stove top model is a challenge due to its age. My stove top looks new again! Plus, they were delivered ahead of schedule! Thank you!!!
Read more
More
$72.95
- Compare At:
-
$86.81
- You Save:
-
$13.86
Genuine Whirlpool part
By: Whirlpool
Part Number: MAL9000AXX
The LP Gas Conversion Kit is an OEM part for Whirlpool appliances. This kit allows for the conversion of natural gas appliances to use liquid propane (LP) gas. It includes all necessary components, such as orifices and instructions, to ensure a safe and efficient conversion.
Over time or due to specific needs, you might need to convert your appliance from natural gas to LP gas. Causes for needing this conversion include moving to an area where only LP gas is available or preferring LP gas due to its efficiency and environmental benefits.
Symptoms indicating the need for a gas conversion kit include:
- Moving to a location that only supplies LP gas
- Changing energy preferences for better efficiency
- Appliances set up for natural gas needing adaptation to LP gas
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
I changed my dryer from ng to lp Dave F. • Kimbolton , OH • June 06, 2015
The kit was very simple it took longer to take the dryer apart than it did to do the change over and it works great thank you for you're product
Read more
More
$49.51
- Compare At:
-
$58.92
- You Save:
-
$9.41
Related Parts
Cooktop Accessories
Cooktop Adaptor Or Connector Parts
Cooktop Baffle Parts
Cooktop Blower Wheel Or Fan Blade Parts
Cooktop Bracket & Flange Parts
Cooktop Bumper, Bushing, Grommet
Cooktop Cable Or Retainer Parts
Cooktop Capacitor Parts
Cooktop Chassis Or Cabinet Parts
Cooktop Clip Or Clamp Parts
Cooktop Control Board Parts
Cooktop Damper & Related Parts
Cooktop Drip Pan
Cooktop Endcap Parts
Cooktop Filter
Cooktop Fuse Or Sensor Parts
Cooktop Gas Conv Kit
Cooktop Gasket & Seal
Cooktop Glass Top Or Cook Top
Cooktop Grate, Grate Feet, Griddle Parts
Cooktop Guard, Shield, Barrier Parts
Cooktop Guide Parts
Cooktop Heating Element
Cooktop Hinge Parts
Cooktop Housing Or Cover Parts
Cooktop Igniter
Cooktop Insulation, Sound Dampening Parts
Cooktop Knob, Dial & Button
Cooktop Latch, Catch, Lock Parts
Cooktop Lens & Related
Cooktop Manual, Care Guide Parts
Cooktop Motor Parts
Cooktop Nameplate, Faceplate Parts
Cooktop Paint
Cooktop Pilot Parts
Cooktop Pipe Or Manifold Parts
Cooktop Regulator Or Pressure Regulator Parts
Cooktop Screws, Nuts, Washers
Cooktop Shaft Or Pin Parts
Cooktop Spark Module
Cooktop Spring Parts
Cooktop Support
Cooktop Suppression Parts
Cooktop Switch Parts
Cooktop Terminal Block, Receptacle
Cooktop Touch Pad Parts
Cooktop Transformer Parts
Cooktop Trim Parts
Cooktop Tube Or Fitting Parts
Cooktop Valve
Cooktop Wire, Harness, Power Cord Parts