Cooktop Control Board

The Range Control Board is an OEM part for Whirlpool ranges. This part manages and regulates the various functions of the range, such as temperature settings, heating elements, and timers. 

Causes of a bad range control board can include electrical surges, wear and tear over time, or exposure to excessive heat or moisture, which can lead to malfunctioning or failure of the board's circuitry.

Symptoms of a bad range control board include:

• The range not heating properly
• Inaccurate temperature settings
• Display errors or failure to show information
• Unresponsive touch controls or buttons

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Oven Control Board is an OEM replacement part for Whirlpool ovens. Includes overlay. This control board manages essential oven functions, including temperature regulation, bake and broil elements, and the display of time and settings. It serves as the central interface, ensuring precise operation of your oven.

Symptoms of a bad Oven Control Board include:

• The oven not heating properly or at all
• The display showing error codes or being blank
• Unresponsive buttons or controls
• Inconsistent cooking temperatures

Causes of a failing Oven Control Board can include power surges, overheating, or general wear and tear over time. Electrical component failures or damage to the circuit board can also render it inoperable.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This electronic control board with overlay manages your range or wall oven's heating and user interface. Replacing a failing control restores accurate temperature regulation, proper bake/broil operation, and a readable display so the appliance responds as it should.

• Regulates oven heat by switching bake/broil circuits based on temperature sensor feedback
• Powers and displays the clock, timer, and status messages
• Interprets keypad/touchpad inputs to run bake, broil, and clean cycles
• Common failure symptoms: dark or flickering display, unresponsive buttons, oven won't start or maintain set temperature, or error codes

• Disconnect power at the breaker before servicing; verify no voltage present
• Use ESD precautions and handle the board by its edges
• Photograph/label wiring; move connectors one at a time to the new board and seat fully
• After installation, run any model-specific checks or calibrations per the service/tech sheet

This genuine replacement part is an oven control board. The oven control board is the main circuit board that controls the ovens' essential functions. If the oven isn't heating properly, not turning on, or showing an error code on the digital display, it might be time to replace the control board. Replacing a control board may seem like a difficult task, but it is a relatively simple process. Start by unplugging the range. After that, move the appliance away from the wall to gain access to the back. Remove the upper back panel, and locate the control board. Take note of the orientation of the wires using a phone camera. Then detach the wire harness from the old control board. Remove any individual wires with a pair of needle-nose pliers. Then re-attach the wires to the new control board in the correct terminals. Snap the new control board into place and re-install the upper back panel of the range.This OEM replacement part is compatible with General Electric, Hotpoint, and RCA brand ovens.

This is the electronic clock and oven control that manages bake and broil functions while displaying time, temperature, and status. Replacing a failed timer restores accurate temperature control and reliable oven operation.

• Regulates oven heating by sending power to bake and broil circuits
• Displays time, set temperature, and cycle status
• Buttons allow setting bake, broil, and timer functions
• Common failure symptoms: no oven heat, inaccurate temperature, unresponsive buttons, error codes, or a blank/partial display

• Disconnect power at the breaker before servicing
• Handle the control carefully; avoid static discharge to the board
• Note wire locations or take photos before removal
• After installation, verify operation and run a test bake

This Electronic Control Board is the brain of your appliance, restoring dependable control of settings and functions. It interprets keypad and sensor inputs and directs power to components like motors, valves, heaters, fans, and lights for reliable operation.

• Manages timing and power to critical components based on user selections and sensor feedback
• Coordinates start/stop and cycle or mode execution for proper operation
• Common failure symptoms: unresponsive controls or display, won't start, cycles that won't advance, random beeping/error codes, or components not energizing
• Replaces a failed, shorted, or damaged control module to restore normal function

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD precautions; handle the board by the edges and avoid touching circuitry
• Label/photograph wiring; move connectors one at a time and confirm secure seating and orientation
• Some models require configuration/programming after installation—follow the tech sheet inside the unit for any personality settings or diagnostics

This part is a control board for an electric range. The main functions of this control board include controlling upper and lower oven temperatures and setting cooking timers. The control board also serves as the display for oven temperatures and times.This part may need to be replaced if the display is cracked, damaged or is for some other reason not properly displaying the time or temperature. This part may also need to be replaced if one or more display buttons are no longer functioning properly. When preparing to replace this part, it is crucial to first unplug the oven from its power source. A nut driver or wrench set will be required in order to open up oven panels to reach the control board that needs replacing. Protective work gloves should be worn while replacing this part.This part is designed for a Kenmore range, and this control board is sold as a single unit. It is an authentic OEM replacement part that is directly sourced from the manufacturer.

This clock timer is the oven's electronic clock and timing control that displays time and manages timed bake or self-clean cycles. It restores on-panel clock and countdown timer functions for safe, predictable oven use. What it does

• Displays the appliance clock and lets you set countdown or timed cooking functions
• Controls timed start/stop for baking or cleaning cycles when used with the oven control
• Helps prevent overcooking by sounding the timer alert at the end of a set period
• Commonly replaces a blank, non-responsive display or a timer that won't start/stop

• Disconnect power to the appliance before attempting any repair to avoid shock risk
• Handle the assembly carefully; confirm connector orientation before unplugging wiring harnesses
• Install in reverse order of removal and verify proper seating of connectors before restoring power

This is the main electronic control board that manages the appliance's functions and user commands. It restores proper electronic control when the original board fails or malfunctions. What it does:

• Interprets commands from the console and controls cycles, timers, and key functions
• Powers and sequences motors, valves, heaters, and other driven components as designed
• Can resolve unresponsive controls, incorrect cycle behavior, or intermittent operation
• May clear display errors or communication faults when the board is the root cause

• (1) main control board assembly

• Disconnect power at the breaker or unplug the appliance before starting any work
• Handle the board by the edges; avoid touching components or connector pins to prevent static damage
• Transfer any brackets, harnesses, or mounting hardware from the old board only if present and required

This user interface control is the touch/display module that reads your button presses and shows status information. Replacing a failing UI restores responsive controls and a readable display so you can operate your appliance reliably.

• Receives button/touch inputs and sends commands to the main control
• Displays time, settings, and status or fault information
• Failure can disrupt communication with the main board
• Common symptoms: unresponsive or intermittent buttons, blank/dim display, error codes, inability to start or change settings

• Disconnect power before servicing; this is an electrical component
• Protect against static discharge; handle the board by its edges
• Note cable routing and connectors; avoid creasing ribbon cables
• If your model uses a separate overlay, transfer it carefully; run any required configuration/diagnostics after installation