Dishwasher Axle, Roller, Pulley Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10505748
The Tub Wheel Assembly is an OEM part for Whirlpool dishwashers. It consists of the wheels and their mounting components that facilitate the smooth gliding of the dishwasher rack in and out of the unit. This assembly is critical for the operation of loading and unloading dishes, ensuring that the racks move smoothly without jamming or causing damage to the dishwasher interior.
Symptoms of a faulty tub wheel assembly include:
- Difficulty in sliding the dishwasher racks.
- Racks getting stuck or derailing during movement.
- Unusual noises when the racks are moved.
The primary causes of wear or damage to the tub wheel assembly can include regular use, excessive load on the racks, or accidental force applied when loading or unloading dishes. These can lead to broken wheels or dislodged fittings, necessitating replacement to maintain functionality.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Top rack rollers were worn Scott A. • Fort Worth , TX • August 03, 2014
Replaced rollers which were easy except i had to pull the dishwasher about half way out of the cabinet
Read more
More
$9.63
- Compare At:
-
$11.36
- You Save:
-
$1.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10078083
This is a wheel and bracket assembly that mounts to the bottom of a dishwasher dishrack, allowing it to slide in and out smoothly on the track. The roller supports the weight of the loaded rack and reduces friction during movement. Replace this assembly if the dishrack is difficult to slide, sits unevenly, or if the roller is cracked, worn, or no longer spins freely.
Do-It-Yourself Stories from Customers like You
Upper rack wheel broken John M. • Hopatcong , NJ • April 25, 2014
Ordered new wheel assembly, which came in about a day and a half. The broken assembly was on the left front so I only had to slide the dishwasher out just enough to expose the two mounting screws on the outside of machine.When you remove the old assm there are two rubber washers on the back side. If you didn't order new ones,remember to remove them from broken assembly and install them onto the new piece.Overall this is an easy fix and took about ten minutes including pulling the machine away...
Read more
More
$50.57
- Compare At:
-
$59.67
- You Save:
-
$9.10
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002780
Dishrack wheel assembly for dishwashers. Replaces broken, cracked, or worn wheels that prevent smooth rack sliding. Includes wheel and axle bracket.
Do-It-Yourself Stories from Customers like You
The sink adapter was squirting water everywhere Devin F. • Saint Joseph , MO • December 19, 2015
Tipped the dishwasher on to its front, loosened the drain hose clamp and pulled the hose off. Then unscrew the fill hose which looks like a garden hose adapter. Cut the zip tie on the drain hose and take note of how both hoses are routed, then pull both hoses out the back of the dishwasher. Insert new hoses and route them correctly and hook everything back up.
Couple of notes, I didn't have to take off the outer cabinet to do this repair. Get plenty of towels because a lot of water can get...
Read more
More
$10.71
- Compare At:
-
$12.74
- You Save:
-
$2.03
Genuine Whirlpool part
By: Whirlpool
Part Number: W11157083
Upper rack wheel assembly for dishwashers. Clips onto rack bars to allow smooth gliding. Replace when cracked, broken, or clips snap off causing instability.
Do-It-Yourself Stories from Customers like You
Top dish rack wound not stay latched in the high position Robin F. • Dayton , OH • February 27, 2015
Replaced the right and left front upper dish rack wheels. The best part was I ordered the parts Monday and had them first thing Tuesday morning.
Read more
More
$36.95
- Compare At:
-
$43.60
- You Save:
-
$6.65
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10078214
Replace broken or worn upper dishrack wheels that prevent smooth rack sliding. Snaps into place on the upper rack roller assembly for easy gliding movement.
Do-It-Yourself Stories from Customers like You
Top rack rollers broken David W. • Clifton , NJ • November 06, 2015
1, Removed roller tray front stoppers from each side.
2. Pulled out empty top rack from dishwasher.
3. Removed existing top rack roller.
4. Inserted new roller where old one was located.
5. Repeated for each roller.
6. Inserted top rack back into dishwasher.
7. Enjoyed using both racks again!!
Read more
More
$32.64
- Compare At:
-
$39.17
- You Save:
-
$6.53
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304533200
This is a replacement dishwasher rack assembly with factory-installed wheels. It restores smooth sliding and safe loading when the original rack is bent, rusted, or missing rollers—helping the rack glide properly and keep items positioned during the wash.
- Holds and organizes dishes, glasses, and cookware during cycles
- Integrated wheels ride on the tracks for easy loading and unloading
- Replace if tines are rusted/broken, wheels are cracked or missing, or the rack derails
- Helps prevent items from tipping and maintains consistent spray coverage
What's included: One rack assembly with wheels pre-installed Install notes:
- Disconnect power to the dishwasher before servicing
- Open the door, extend the rack, release any rail end-stops, and remove the old rack
- Transfer any removable accessories from the old rack to the new one, if needed
- Slide the new rack onto the rails and reinstall end-stops; verify smooth operation
Do-It-Yourself Stories from Customers like You
Dishwasher rack was rusting out in places Jim K. • Harlowton , MT • March 11, 2016
Replaced it.
Read more
More
$105.95
- Compare At:
-
$126.08
- You Save:
-
$20.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W10812692
Planetary gear assembly for stand mixers. Installs in the mixer head and drives attachments in orbital motion. Replace if cracked, broken, or worn.
Do-It-Yourself Stories from Customers like You
Broken orbital and gear reduction due overloading. George P. • Eastlake , OH • March 19, 2019
Replaced the entire Drive set, even the motor that was not broken.
The six quart 6000 HD is running like new. We broke it, your parts fixed it.
Of course takes a little know-how on our part as well.
Thank you!
Read more
More
$66.78
- Compare At:
-
$78.80
- You Save:
-
$12.02
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9708175
Color: Metallic Chrome
Do-It-Yourself Stories from Customers like You
Planetary drive shift slipped. Mark B. • Cumming , GA • June 18, 2019
Tore down transmission gear case of my Kitchenaid Professional 600 stand mixer and replaced worn components to include front and rear sleeve bearing, worm gear thrust bearing, worm follower gear, drive shaft retaining clip, center shaft o-ring, and dowl pin. Additionally, replaced black plastic transmission housing with metal one and new gasket, replaced entire planetary assembly, and repacked transmission with OEM food grade grease. After tear down, but before rebuild, l cleaned all...
Read more
More
$59.48
- Compare At:
-
$70.78
- You Save:
-
$11.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8270138
Replacement wheel for dishwasher upper rack. Attaches to the rack and rolls along interior tracks for smooth gliding. Needed when wheels are broken, cracked, or missing.
Do-It-Yourself Stories from Customers like You
Screw on one of the roller on upper tray broke Tim J. • Bend , OR • December 28, 2014
Replaced complete roller- screw,wheel and axel. Easy job
Just recently I had to replace upper spray arm. I ordered assembly from you and was completely satisfied with your service and price, that was over 1/2 of what local appliance repair dealer wanted. Very satified with how to do video on this project
Read more
More
$9.05
- Compare At:
-
$9.96
- You Save:
-
$0.91
Genuine Whirlpool part
By: Whirlpool
Part Number: WP903093
Upper rack wheel assembly for dishwashers. Includes wheel and mounting bracket. Replace if cracked, broken, or causing rough rolling of the upper rack.
Do-It-Yourself Stories from Customers like You
Top rack of the dishwasher rusted through Gary S. • Little Chute , WI • October 26, 2014
Got the make and model. Put it in your web site order form and watched the video. The part came the replacement part was made and job done. Thanks. Great parts, fast shipment and again job done.
Read more
More
$14.95
- Compare At:
-
$17.64
- You Save:
-
$2.69
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304506916
This roller assembly mounts to the bottom of a dishwasher dishrack and allows it to slide in and out of the tub smoothly. It typically includes the roller wheel, axle, and mounting clip. Replace this part if the dishrack is difficult to pull out, rolls unevenly, or if the roller is cracked, worn, or has fallen off the track.
Do-It-Yourself Stories from Customers like You
Upper wash rack kept derailing had the same problem two years ago on the opposite side center hole of roller assembly appeared worn allowing rail to pop out of grove Nicholas J. • Broken Arrow , OK • February 28, 2020
Two years ago replaced all four roller assemblies of affected side. Problem recently reoccured on the opposite side. Replaced all four roller assemblies on that side. Entire repair took about twenty minutes.
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Samsung part
By: Samsung
Part Number: DD66-00023A
Replacement roller wheel for dishwasher lower rack. Installs on bottom dish rack to help it glide smoothly. Needed when rollers are broken, missing, or worn.
Do-It-Yourself Stories from Customers like You
Bottom shelf of my dishwasher was a poa ;) Kelsea B. • Laguna Niguel , CA • April 10, 2015
Bought 2 new wheels and it works perfectly. Yay!
Read more
More
$18.66
- Compare At:
-
$22.02
- You Save:
-
$3.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99003149
Replacement wheel assembly for dishwasher lower rack. Includes wheel and clip-on axle. Install when wheels are broken, cracked, or worn causing racks to stick.
Do-It-Yourself Stories from Customers like You
Some parts had melted on the dishwasher rack Steve O. • Red Wing , MN • June 04, 2015
I ordered the parts using the make and model no.s and found it quickly at AppliancePartsPros.com. The parts were correct and snap into place in just 5 minutes I was done and the dish rack worked great. I also ordered a new handle since the old one broke out in the middle about 2 years ago. This repair took another 5 minutes and is working great. Thanks
Read more
More
$14.95
- Compare At:
-
$17.64
- You Save:
-
$2.69
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304475625
Replacement wheel assembly for dishwasher racks. Snaps onto lower or upper rack to restore smooth gliding. Needed when wheels are broken, cracked, or missing.
Do-It-Yourself Stories from Customers like You
Upper rack rotted Terrance B. • Lynbrook , NY • January 08, 2018
Replaced upper rack (it comes with wheel assembly). The only tricky part was removing spray bar from old rack.
Read more
More
$30.95
- Compare At:
-
$36.83
- You Save:
-
$5.88
Genuine Whirlpool part
By: Whirlpool
Part Number: WP240210-2
Replaces a worn or stripped shaft-and-pinion assembly in your stand mixer. Installs in the geartrain to transfer motor rotation to driven components.
Do-It-Yourself Stories from Customers like You
Stripped gears Dana C. • Gardner , MA • April 12, 2018
Replaced gears, replaced grease.
Original shims kept proper tolerance.
Read more
More
$16.95
- Compare At:
-
$20.34
- You Save:
-
$3.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10580220
Replacement wheel for dishwasher upper rack assembly. Supports and guides smooth rack movement. Needed when original wheel is cracked, broken, or worn.
Do-It-Yourself Stories from Customers like You
Needed new wheels. Casey G. • Ansonia , CT • December 13, 2020
Installed new wheels.
Read more
More
$34.75
- Compare At:
-
$41.35
- You Save:
-
$6.60