Dishwasher Dishrack

Replacement rail for dishwasher upper dishrack. Installs inside tub to guide rack sliding. Replace if cracked, bent, or causing rack to fall off track.

This replacement dishrack restores secure loading and proper spacing so wash water reaches every item. Replacing a bent or rusty rack helps prevent tipped dishes and marks from flaking rust, and keeps loading/unloading smooth when the rack rollers are intact.

• Holds plates, bowls, and cups in place during wash and rinse cycles
• Maintains spacing for spray coverage and drying airflow
• Rolls in and out along the rails when paired with functional rack rollers
• Common symptoms include broken or bent tines, flaking coating or rust, items tipping, or difficulty sliding the rack

• Disconnect power to the dishwasher before servicing
• Open the door, pull the rack forward, release rack stops/end caps if present, and slide the old rack off the rails
• Transfer any reusable accessories from the old rack to the new rack as required by your model
• Slide the new rack onto the rails, reinstall rack stops, and verify smooth travel before running a cycle

Lower dishrack assembly for dishwashers. Holds dishes during wash and dry cycles. Replace if cracked, rusted, tines broken, or missing. Includes wheels.

Upper rack assembly for dishwashers in onyx black finish. Holds glasses, cups, and small dishes. Replace your cracked, bent, or missing upper rack.

The Silverware Basket is an OEM component specifically designed for Whirlpool dishwashers. Located at the bottom outer edge of the tub, the silverware basket provides designated silverware basket dishwasher spacing to properly clean utensils away from other dishes. 

Composed of crisscrossing finger prongs attached to a reinforced circular base, the basket holds forks, knives, and spoons upright safely in place during wash cycles. Its lightweight plastic construction flexes under pressure without breaking or cracking.

Symptoms of a bad silverware basket include:

• Loose or falling utensils obstructing other spray jets   
• Dull or improperly cleaned silverware after cycles
• Visible cracks, chunks missing, or sharp prongs

Replace with this OEM Whirlpool basket to restore form-fitting function. This part fits Whirlpool, KitchenAid, Jenn-Air and select Maytag and Amana dishwashers.

Replacement convertible tines kit for dishwasher racks. Includes tines and clips. Replaces broken, cracked, or missing tines that no longer hold dishes.

Replacement flip tine for dishwasher lower racks. Restores folding rack supports for loading dishes of various sizes. Silver finish blends with rack.

Secures tines to your dishwasher rack assembly. Replace this retaining clip if it's cracked, broken, or missing to keep rack tines properly positioned.

This is a handle attached to the upper dish rack in a dishwasher, used to slide the rack in and out of the tub. It provides a grip point for loading and unloading dishes from the upper rack. Replace this part if the handle is cracked, broken, or has detached from the rack, making it difficult to maneuver the upper dishrack.

Secures silverware basket to dishwasher rack to prevent tipping during wash cycles. Replace if clip is cracked, broken, or missing to keep basket stable.

Factory replacement access panel cover for dishwashers. Protects internal wiring and controls from dust and accidental contact. Needed when cracked or missing.

Replacement finger indexer for dishwasher dishrack. Installs on the right side to secure and guide dish rack movement. Order if broken or missing.

This is a glass multi-purpose shelf designed to sit inside the dishwasher dishrack, providing an additional flat surface for cups, small bowls, and other lightweight items. It helps maximize loading capacity by creating a second tier within the rack. Replace this shelf if it is cracked, chipped, or broken, which can cause items to fall through or not wash properly.

This shelf cup is a small replacement cup that secures a refrigerator door shelf in place, restoring shelf stability and preventing items from slipping or the shelf from sagging. It's a direct-fit replacement designed to match the original mounting. What it does:

• Supports and anchors a door shelf or shelf bin to the refrigerator door
• Keeps the shelf level so stored items don't slide or tip
• Replaces cracked, broken, or worn shelf cups that allow shelf movement
• Restores proper alignment and secure seating of the shelf/bin

• Disconnect power only if you must move or tilt the appliance; otherwise remove items from the door and work with the fridge closed
• Remove the affected shelf/bin and detach the old cup
• Press the new shelf cup into place until it seats fully; re-install the shelf/bin and check for secure fit

Replace your cracked, rusted, or deteriorating dishwasher upper rack. Includes tiered rack shelf and rollers for secure placement of cups and small plates.

Replacement adjuster socket for dishwasher leveling feet. Installs at cabinet base to raise or lower the unit for level installation. Replace if cracked or stripped.