Dishwasher Hose Or Tube

This adjustable manifold connects the upper rack to the dishwasher's rear water feed. It channels wash water to the upper spray arm and maintains a sealed connection as the rack height changes for consistent cleaning performance. What it does:

• Routes water from the rear feed tube to the upper/middle spray arm
• Self-adjusts with rack position to keep a secure, leak-resistant connection
• Replace if cracked, deformed, or the coupling no longer seals
• Common symptoms include poor cleaning on the upper rack, weak spray, upper spray arm not turning, or a small leak at the back of the tub

• 1 adjustable manifold

• Disconnect power and shut off water; wear gloves for protection
• Remove the upper rack by releasing the rail end caps and sliding the rack out
• Unclip the manifold from the rack and disengage it from the rear feed port; seat the new manifold fully
• Reinstall the rack and ensure the spray arm spins freely

This outlet hose carries wastewater from the appliance to the household drain. Replacing a cracked, kinked, or clogged hose restores proper draining and helps prevent leaks at the base or under the sink.

• Directs water from the drain pump/sump to the home drain connection
• Common symptoms of a failing hose: standing water after a cycle, slow or no drain, leaks, or visible cracks/kinks
• Restores proper draining when the original hose is brittle, collapsed, or internally obstructed
• Also referred to as a drain hose in many service manuals

• Disconnect power and turn off water before servicing; protect the floor with towels or a tray
• Access both ends of the hose, release clamps, and be prepared for residual water
• Route the new hose like the original, avoiding sharp bends; fully seat and secure all connections
• Run a short cycle and check all joints for leaks after installation

12 Ft in length

This dishwasher hose routes water between internal components to support proper wash and drain performance. Replacing a cracked or leaking hose helps prevent water damage and restores reliable water flow inside the machine. What it does:

• Carries water between internal components during wash and drain cycles
• Helps maintain a watertight path to prevent leaks inside the cabinet
• A damaged hose can lead to puddles under the unit, water in the base pan, or reduced wash/drain performance
• Visible splits, pinholes, soft spots, or kinks are signs the hose needs replacement

• 1 hose

• Disconnect power and turn off the water supply before servicing
• Pull the dishwasher forward for access and place towels to catch residual water
• Transfer/reuse existing clamps or replace if worn; ensure secure, leak-free connections
• Route the hose without kinks and run a short test cycle to check for leaks

This drain hose channels used water from the appliance's drain pump to the household plumbing. Replacing a cracked, kinked, or clogged hose stops leaks and helps your unit drain correctly at the end of the cycle.

• Directs wastewater from the drain pump to the home drain system
• Helps maintain proper outflow during the drain portion of the cycle
• Common symptoms: standing water after a cycle, water on the floor, drain error codes, visible cracks or kinks in the hose
• Old hoses can become brittle, split, or obstructed over time

• Disconnect power; shut off water supply if applicable
• Place towels or a pan to catch residual water when removing the old hose
• Note original routing; install the new hose without sharp bends or kinks and secure all connections with existing clamps or appropriate replacements
• Run a test drain/cycle and check every connection for leaks

The Dishwasher Drain Inlet Hose is an essential component for maintaining the efficient operation of your dishwasher. This genuine OEM part ensures proper drainage, preventing leaks and water buildup that can disrupt your applianceGÇÖs performance. Crafted with durability in mind, the hose is designed to withstand the rigors of daily use, providing long-lasting reliability for your Samsung dishwasher. Installing the Dishwasher Drain Inlet Hose is straightforward, allowing you to restore your dishwasherGÇÖs functionality quickly and easily. By replacing a worn, cracked, or damaged hose with this high-quality genuine OEM part, you can ensure a secure fit and optimal performance. Compatible with a range of Samsung dishwasher models, this drain inlet hose helps maintain the cleanliness and efficiency of your appliance, ensuring that your dishes come out sparkling every time. Trust in this dependable part to enhance your dishwasherGÇÖs drainage system and prolong the life of your appliance.

This 10-foot dishwasher drain hose routes wastewater from your machine to the sink drain or disposer. Replace a cracked, kinked, or too-short hose to restore reliable, leak-free draining and accommodate longer drain runs.

• Conveys drain water from the dishwasher to the household drain/disposer
• Helps address leaks from brittle, split, or loose hoses
• 10-foot length provides extra reach for extended routing

• Disconnect power and turn off water before service
• Route with a proper high loop or air gap per your model manual and local code to prevent backflow
• Avoid kinks; secure connections with appropriate clamps and ensure tight fits
• Run a test cycle and check all connections for leaks

This inlet hose supplies household water to the appliance's fill system. Replace a worn, kinked, or cracked hose to restore normal water flow and help prevent leaks that can lead to poor performance or damage. What it does:

• Connects the home water supply to the unit's inlet/fill connection
• Provides a sealed pathway for water during operation
• Helps maintain consistent water flow to the appliance
• Common symptoms: leaks at fittings, slow or no fill, visible kinks, bulges, or cracks

• Includes: One inlet hose

• Disconnect power and shut off the water supply before servicing
• Place a towel or pan to catch residual water; relieve any line pressure
• Hand-thread fittings to avoid cross-threading, then tighten snugly—do not overtighten
• Restore water, check all connections for leaks, and test operation

This faucet adapter threads onto a compatible sink faucet to provide the connection point for an appliance's quick-connect hose, creating a secure, watertight hookup during filling and operation. What it does:

• Adapts faucet spout threads to accept the appliance hose/coupler
• Helps prevent leaks and drips at the faucet connection
• Replaces a worn, stripped, or missing adapter
• Common fix when a quick-connect hose (e.g., on a portable appliance) won't attach or pops off

• 1 faucet adapter

• Turn off water and remove the existing faucet aerator before installing
• Hand-thread the adapter carefully to avoid cross-threading; snug gently if needed with a non-marring tool
• Attach the hose/coupler and slowly open the faucet; check for leaks and retighten if necessary

The Drain Hose is an OEM part for Whirlpool dishwashers. This hose works to divert wastewater from the dishwasher to the garbage disposal or drain pipe beneath the kitchen sink.

The drain hose is responsible for safely transporting soapy water, food debris and other particles away from the washing cavity during each cycle. It prevents leaks and backup within the dishwasher tub.

Causes of a bad drain hose can include cracks, splitting, or deterioration of the plastic tubing over many years of use. Clogs within the hose are also problematic.

Symptoms of a failed drain hose include:

• Puddles or leaks developing beneath the dishwasher
• Inability to fully drain wash and rinse water after cycles
• Fault codes showing drainage issues

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replacement unicouple assembly that connects your portable dishwasher to the sink faucet. It supplies fresh water and routes drain water back to the sink, restoring proper fill/drain and a tight, drip-free connection when the original wears out.

• Provides a quick-connect link between the dishwasher and sink faucet
• Supplies fresh water to the unit and returns drain water to the sink
• Helps maintain a sealed, drip-resistant connection at the coupler
• Often resolves: leaks at the faucet or hose, won't fill/slow fill, won't drain/backs up, coupler won't stay attached

• Unplug the dishwasher and turn off the faucet/water supply before service
• Place towels or a pan to catch residual water; relieve pressure at the sink
• Move the unit to access hose connections; match the original routing and secure clamps firmly
• After installation, attach to the faucet and run a short test to check for leaks during fill and drain

Replacement fill hose that routes water from the household supply to the appliance's ice maker and water dispenser, restoring proper water delivery and helping prevent leaks or pooling from a damaged line. What it does

• Directs water from the inlet valve to the ice maker and dispenser for ice production and dispensing.
• Maintains steady water flow; prevents kinks and pinched lines that reduce flow.
• Replace if cracked, split, collapsed, or leaking.
• Common symptoms: reduced or no water to the dispenser or ice maker, visible leaks, or pooling under/behind the appliance.

• Turn off the water supply and disconnect power before servicing to avoid flooding and electrical hazard.
• Inspect and replace clamps or fittings as needed; ensure proper seating and a snug, leak-free connection without overtightening.
• Check for kinks in the hose and route it so it won't be pinched by the appliance or cabinetry.
• After installation, turn the water back on and test for leaks at all connections.

This drain adapter assembly links the dishwasher's drain outlet to the drain hose leading to a sink drain or garbage disposer, creating a secure, watertight discharge path. Replacing a damaged adapter helps stop leaks and supports proper draining.

• Adapts and seals the outlet from the sump/pump to the drain hose or disposer
• Helps maintain proper discharge flow during the drain cycle
• Common symptoms include water under the unit and standing water left in the tub

• Disconnect power at the breaker and shut off water; bail out any standing water
• Access the drain outlet and place a towel or pan to catch residual water
• Move the hose clamp, remove the old adapter, and seat the new adapter squarely
• Reattach the hose, secure the clamp, and run a brief test cycle to check for leaks

This replacement drain hose routes wastewater from the dishwasher to the sink drain or garbage disposer. The 12-foot length provides extra reach for longer installations and helps restore dependable, leak-free draining performance.

• Carries discharge water from the dishwasher to the home's drain system
• Replaces hoses that are cracked, brittle, leaking, or kinked
• Supports proper drain routing when installed with a high loop or air gap as required

• Disconnect power and shut off water supply before servicing
• Pull the dishwasher forward; place a towel or tray to catch residual water
• Route the hose with a high loop or through an air gap per local codes; avoid kinks and sharp bends
• Secure connections at the dishwasher and sink/disposer with appropriate clamps; run a test cycle and check for leaks

This hose connector links internal water lines inside the dishwasher and maintains a secure, leak-resistant seal for proper water flow during each cycle. Replacing a worn connector helps stop leaks and keeps cleaning performance reliable.

• Joins internal water lines/components with a tight, reliable seal
• Helps prevent drips and leaks at a hose connection point
• Supports consistent water circulation through the wash system
• Typical symptoms: puddles under the unit, moisture around the base, visible cracks/swelling at the connector, or a loose fit

• Unplug the dishwasher and turn off the water supply before servicing
• Remove the toe-kick/access panel; place a towel to catch residual water
• Note hose routing and orientation; fully seat the connector and transfer/reuse existing clamps
• After reassembly, run a short cycle and inspect all connections for leaks

Contains two, six foot long braided hoses with 90 degree ends.