Frigidaire Motor

I removed the fresh food ice maker found the drain tube for ice maker frozen. This was causing the back of the unit to rust out. This also caused the water to run down the back of the unit the into the duct work and into the freezer causing ice buildup. I then defrosted the freezer removed the rear duct work and the freezer drain pan cover. I found the freezer drain was not draining. I removed the exterior rear cardboard cover and located the freezer drain tube removed it and found that it was... Read more

REPLACED DEFROSTER, CONDENSER FAN MOTOR AND DEFROST THERMOSTAT. Read more

Purchased a new one works good so far Read more

I watched videos on the website and took it apart. Put new motor on, also I put new belt even though the original belt was still ok, but I saw a little sign of shredding ...and there! !! It works like brand new washing machine. . Thanks to appliancepartspros.com...It made save a lot of money by doing it myself.. Read more

I replaced the motor. It was time consuming because you have to take all of the parts that attach off. Was fairy simple. Pleased about the parts delivery. Ordered and received the next day. Read more

I took the easy fix first and replaced the Capacitor. That got me three loads before the motor burned out. I ordered the motor from AppliancePartsPros.com after a google search for "best price model # 134159500 Drive motor " The part arrived in 5 days, and it took about 15 minutes to remove the old motor and replace it with the new one. Simple and easy. four screws, four nuts, and two electrical connections. — The hardest step was one of the four mounting screws was way back inside and it took... Read more

Purchased new blower assembly and installed in existing range hood. Read more

Everything was straight forward and easy to repair, I had an appliance tech come out and troubleshoot the repair and watched what he did and asked questions. I then ordered the parts from here and did the repairs myself and saved on having the tech make another trip out. Read more

Replaced motor and new solenoid and yoke assembly, motor ran fine but Ice maker did not make Ice, water was turned on and the wire off and on latch was is the down position (on). Disconnected the water line from the Ice maker tray, ice had formed in the line while I was waiting for my parts (about 5 days), I would suggest disconnecting the water line at the feed end were your shut off valve is located and allow water to drain out of line. I had to remove Ice tray and submerge it pan of hot... Read more

I removed the 7 screws on the bottom of the microwave that held the bottom sheet metal piece. The piece dropped down , exposing the turntable motor. I ordered the parts I needed, the motor and the coupler (which had broken), and when they arrived the next day, I removed the 2 screws which held the motor in place and installed the new motor. I replaced the sheet metal piece and the 7 screw, and then put the coupler in the microwave, pushing it onto the motor. I replaced the glass turntable. ... Read more

REPLACED THE FREEZER EVAPORATOR MOTOR. PART WAS CORRECT ONE AND FIT GREAT! Read more

• Tray won't turn

Start bye removing the three screws that hold the underside of the microwave up. Once those are undone, the panel pivots down. You then need to un-attach the lights so the panel will totally come off and out of the way. The motor is plainly visible. Remove the power plug and remove the one screw then it twists out of its slot. Install the new motor and reverse the directions. Read more

My husband fixed it one two three. Thank you for your fast delivery and very help staff. Read more

Ordered the parts from Appliance Pro's and installed them. Fairly easy install. Just plug in connections on motor's electrical. Top and front come off of Dryer then once belt is unhooked the Drum comes right out and you have easy access to the motor and blower. After that it is just 4 screws that hold motor and blower in. Install new equipment in bracket and fastened back in machine. When completed hit start button and off it went. Works Great. And has run several loads in last couple days. Read more