General Electric Ice Bin, Bucket, Or Tray

This ice bucket fits the refrigerator ice dispenser assembly to store and feed cubed ice to the dispenser chute, keeping ice contained and ready to dispense. Restores proper ice delivery for models that use this bucket. What it does:

• Holds and channels cubed ice from the dispenser housing to the chute
• Aligns with the dispenser mechanism to allow smooth ice release
• Helps prevent loose ice from backing up into the dispenser
• Commonly replaces cracked, warped or damaged buckets that cause ice jams or poor dispensing

• One ice bucket

• Disconnect power to the refrigerator before servicing
• Remove any remaining ice before removing or installing the bucket
• Handle plastic parts carefully to avoid cracking; ensure the bucket is seated and aligned with the dispenser components
• If access requires removing shelves or the freezer door, follow the refrigerator's service instructions

Replace a cracked or damaged dispenser bucket with this direct-fit ice bucket to restore reliable ice storage and dispensing. Fits refrigerators with a top-mounted ice dispenser and holds the ice used by the dispenser assembly. What it does:

• Holds and guides cubed or crushed ice from the freezer storage to the dispenser
• Ensures proper alignment for the dispenser auger and chute to reduce jams
• Prevents ice from spilling into the freezer compartment
• Helps maintain consistent ice flow to the dispenser chute

• Disconnect power to the refrigerator before service to avoid injury
• Remove all ice from the bucket before uninstalling or installing
• Handle gently to avoid cracking the new bucket; avoid overtightening fasteners
• Check orientation and engagement with the auger/dispenser mechanism during reassembly

This ice bucket & auger assembly stores ice and uses an internal auger to move cubes to the dispenser. Replace a cracked bin or stripped auger to restore consistent, reliable ice dispensing performance.

• Holds ice for the dispenser and guides it toward the outlet
• Auger rotates to push ice forward when the dispenser is activated
• Helps resolve no ice dispensing, auger not turning, grinding/clicking from the bin, or a cracked/broken bucket
• Restores proper engagement between the ice bin and the drive coupling

• Disconnect power to the refrigerator and switch the ice maker off before servicing
• Remove the ice bin; empty remaining ice to prevent jams during reinstallation
• Align the auger drive coupling and seat the new bin fully in place
• Restore power, turn the ice maker back on, and test the ice dispenser; wear cut-resistant gloves as internal edges can be sharp

This ice bucket and auger assembly collects, stores and moves ice inside the freezer so the dispenser and ice chute can operate reliably. Replaces a worn, cracked or jammed bucket/auger to restore ice delivery. What it does:

• Holds and contains cubed or crushed ice in the freezer bin
• Auger rotates to feed ice toward the dispenser or chute
• Helps prevent jams when the auger and bucket are intact and correctly aligned
• Commonly replaces buckets that are cracked, warped, or no longer turning with the auger

• One ice bucket and auger assembly

• Disconnect power to the appliance before servicing to avoid injury
• Remove inner freezer trim panels as needed to access and lift out the old bucket
• Handle plastic parts carefully to avoid cracking; ensure auger drive engages properly on reassembly

This ice bucket and auger assembly stores and moves ice from the freezer bin to the dispenser, restoring reliable dispensing and keeping ice contained. Designed as a direct replacement for worn, cracked, or jammed ice buckets. What it does:

• Holds and protects harvested ice in the freezer ice bin.
• Auger rotates to move ice toward the dispenser chute for smooth dispensing.
• Replaces broken or cracked buckets that leak or allow ice to jam.
• Helps resolve symptoms like ice not dispensing, noisy operation, or ice buildup in the bin.

• Disconnect power to the appliance before servicing to avoid injury.
• Remove the old bucket and auger carefully; align the new assembly so the auger motor/control engages properly.
• Check for ice obstructions and clear the dispenser path before testing.

This ice bucket and auger assembly stores the ice your refrigerator makes and drives it forward for dispensing. Replacing a cracked bin or worn auger restores smooth, reliable ice delivery and helps reduce jams, clumping, or grinding.

• Stores the ice supply inside the freezer
• Auger advances ice forward to the dispenser chute
• Restores consistent dispensing when the bucket or auger is damaged
• Symptoms can include little or no ice dispensing, jams, or grinding noises

• Disconnect power to the refrigerator and turn off the icemaker before service
• Remove the old bin, empty remaining ice, and clear any frost or blockages in the chute
• Align the auger drive coupling with the dispenser drive when installing the new bin
• Restore power and test ice dispensing

This is the ice bucket assembly for the freezer door dispenser. It stores ice and uses the internal auger and crusher components to move cubes to the chute for dispensing.

• Holds and delivers ice from the freezer to the dispenser chute
• Worn or broken auger/drive can cause no dispense, weak dispense, or ice jamming
• Cracked bin may leak ice or fail to engage the drive
• Damaged crusher parts can lead to only cubes or only crushed ice dispensing

• Unplug refrigerator and remove the ice bin before service
• Transfer any loose ice to a cooler to prevent spills
• Inspect drive coupling and dispenser yoke for wear while the bin is out
• Ensure bucket seats fully and test dispense for both cube and crushed modes

This bucket and cover assembly replaces a broken or cracked ice bucket and its lid so your refrigerator dispenses ice cleanly and reduces spills. Durable plastic construction restores proper ice storage and dispensing. What it does:

• Holds and stores cubed or nugget ice in the dispenser well
• Lid helps keep ice sanitary and prevents airborne contamination
• Guides ice toward the dispenser chute for consistent delivery
• Replaces damaged, cracked or warped buckets that cause jamming or leaks

• 1 bucket and 1 cover assembly

• Disconnect power to the refrigerator before beginning any work
• Remove the old bucket and lid by following the refrigerator's owner manual instructions
• Handle plastic parts carefully to avoid cracking; align the assembly so it seats fully in the dispenser well

This ice bucket is the removable plastic bin that collects and stores ice from the ice maker, keeping cubes contained and easy to access. It restores proper ice storage and makes removing or pouring ice simple. What it does:

• Holds and stores ice produced by the freezer ice maker so cubes stay contained and sanitary.
• Guides ice from the ice maker into the storage bin to prevent spills and jams.
• Allows easy removal for scooping, pouring, or cleaning when ice build-up occurs.
• Commonly replaced when the bucket is cracked, warped, missing, or no longer seats properly.

• One ice bucket.

• Unplug or disconnect power to the appliance before servicing the ice maker area.
• Slide the bucket into the freezer compartment aligning tabs or guides; do not force.
• Handle plastic tabs and mounting points carefully to avoid breakage.
• Inspect the ice maker assembly and chute for ice buildup or damage.

This bucket and auger assembly replaces the ice-dispenser bucket and rotating auger that moves ice from the storage bin into the dispenser chute. Restores reliable ice delivery for refrigerators with a broken or worn dispenser auger. What it does

• Rotates inside the ice bucket to feed ice toward the dispenser chute.
• Clears and moves stored ice for normal dispense operation.
• Common repair for symptoms like no ice dispensing, auger not turning, ice jamming in the bucket, or unusual grinding/noise from the dispenser.
• Fits into the refrigerator's ice storage/bucket area and works with the dispenser drive mechanism.

• Disconnect power to the refrigerator before beginning service to avoid electrical shock and accidental dispenser operation.
• Remove and discard or store existing ice, then work with an empty, dry bucket to install the new assembly.
• Handle components carefully—edges and plastic parts can be sharp or brittle; wear gloves as needed.
• Follow the refrigerator OEM service instructions for correct alignment and reassembly; check for secure engagement with the drive motor before restoring power.

This ice bucket and auger assembly replaces the frozen-ice storage and dispensing components so your refrigerator can hold and move ice to the dispenser properly. Restores ice delivery and storage after damage or wear. What it does:

• Holds and stores harvested ice in the freezer dispenser housing
• Auger rotates to move ice from the bucket to the dispenser chute for dispensing
• Commonly used when ice won't dispense, dispenser motor turns but no ice moves, or bucket is cracked/damaged
• Helps reduce jams caused by broken or worn auger paddles

• Disconnect power to the appliance before beginning any service
• Remove stored ice and any obstruction before installing; handle plastic parts carefully to avoid damage
• Test dispenser operation with small amounts of ice after reassembly to confirm proper function