General Electric Ice Maker & Related

The Electromechanical Icemaker Kit is an OEM replacement part for GE refrigerators. It includes the ice maker assembly components responsible for harvesting, ejecting, and monitoring the ice-making process.

Symptoms of a faulty electromechanical kit include: 

• Ice not being produced or dispensing properly
• The ice maker failing to turn on or stop automatically
• Strange noises emanating from the ice maker

Causes can be worn parts like the ejector assembly or drive motor, as well as electrical malfunctions. Continued use puts wear on components that regulate ice production.

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today for reliable ice on demand.

The Ice Maker is an OEM part for GE refrigerators. It is a crucial component responsible for producing and dispensing fresh ice cubes, providing a convenient source of ice for your beverages and other needs. The ice maker is designed to automatically replenish the ice supply, ensuring you never run out.

Symptoms of a bad ice maker include:

• Failure to produce ice or produce an insufficient amount
• Ice cubes that are misshapen or stuck together
• Water leaks or overflow from the ice maker area

Causes of a bad ice maker can range from issues with the water supply line or freezing mechanism, to mechanical failures or blockages within the ice maker itself. Over time, mineral buildup or freezing can also impact the ice maker's ability to function properly.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Icemaker is an OEM part for GE refrigerators. This part automatically produces ice within the freezer compartment, ensuring a consistent and convenient supply of ice cubes for your household needs. 

Over time, the icemaker may require replacement due to common issues like wear and tear, malfunctioning components, or a failure to produce ice properly.  

Symptoms of a bad Icemaker include:

• Failure to produce ice or producing very little ice
• Ice cubes are smaller than normal or not uniform in shape
• Water leaking inside the freezer compartment
• Strange noises coming from the icemaker unit

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Stripper is an OEM Replacement Part designed for rear-mount icemakers in GE refrigerators. This part measures approximately 7.25 x 2.5 inches. The ice stripper functions during the ejection cycle to remove ice from the icemaker mold. This white and plastic part facilitates the transfer of ice cubes from the ice maker into the ice bucket.

Causes of a bad ice stripper can include regular wear and tear from frequent use, exposure to hard water deposits, and accidental impacts or mishandling. Over time, the stripper can crack, break, or become inefficient at removing ice cubes.

Symptoms of a bad ice stripper include:

• Ice cubes not being properly dispensed into the ice bin
• Ice cubes getting stuck in the mold
• The ice maker not producing ice as efficiently
• Visible damage or wear on the stripper

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models

This refrigerator ice maker assembly freezes water and automatically ejects cubes into the bin. Replacing a failed unit restores steady, hands-free ice production and helps resolve common ice maker cycling and cube-ejection issues.

• Freezes water in its mold, then harvests and drops finished cubes into the ice bin
• Controls fill and harvest timing for consistent cube production
• Typical failure symptoms: no ice production, unit stuck mid-cycle, cubes not ejecting, or loud clicking/grinding from the drive
• Works with the refrigerator's controls to pause ice making when the bin is full

• Disconnect power and shut off the water supply before servicing
• Remove the ice bin and any covers; unmount the old ice maker and disconnect its wiring harness
• Transfer any brackets, covers, or guides from the old unit if needed
• Mount the new assembly, reconnect wiring, restore power/water, and allow up to 24 hours for full ice production

This refrigerator ice maker assembly automatically fills, freezes, and ejects cubes into the storage bin. Replace it to restore dependable ice production when the original unit stops making ice, won't harvest, leaks from the mold, or overfills. What it does

• Performs automatic fill, freeze, and harvest cycles to produce ice
• Controls water-fill timing for each cycle
• Stops ice production when the bin is full
• Common symptoms: no ice production, won't eject/harvest, overfilling or dripping from the ice maker, loud clicking/jammed ejector

• Ice maker assembly (1)

• Disconnect power and turn off the refrigerator's water supply before servicing
• Remove the ice bin/cover, unfasten mounting screws, and disconnect the wire harness
• Position the new assembly, align with the fill tube, reconnect the harness, and secure with screws
• Restore power and water; check for proper alignment and allow time for ice production to normalize

This ice maker assembly replaces the refrigerator's frozen-water harvesting unit so your fridge can produce and eject ice reliably. Designed as a direct replacement to restore normal ice production and harvesting cycles. What it does:

• Automatically fills with water, freezes, then cycles to harvest ice cubes into the bin
• Uses the built-in thermostat and motorized ejector to release formed ice
• Restores ice production when the original ice maker is no longer cycling or is producing little to no ice
• Can stop ice leaks and erratic harvesting caused by a failed ice maker mechanism

• Disconnect power and turn off the water supply before beginning work
• Handle the unit and electrical connector carefully to avoid damage to the harness
• Install with OEM mounting points; ensure the ice maker is level and securely fastened
• After installation, restore power/water and run a test cycle to confirm proper fill and harvest

The Icemaker is an OEM part for GE refrigerators. It is designed to produce ice cubes by automatically filling the ice mold with water, freezing it, and then ejecting the ice into the ice bucket. This part ensures a steady supply of ice for your household needs.

Causes of a bad icemaker can include mechanical wear and tear, electrical failures, or issues with the water supply. Over time, the icemaker’s components can degrade, leading to inconsistent ice production or complete failure.

Symptoms of a bad icemaker include:

• No ice production
• Small, misshapen, or hollow ice cubes
• Ice maker not ejecting ice
• Unusual noises from the ice maker

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This feeler arm is the small detection lever used on the ice maker to sense ice level and stop the fill cycle. It helps the ice maker avoid overfilling and keeps ice production consistent. What it does:

• Detects ice buildup in the bin and signals the ice maker to stop the fill cycle
• Prevents overfilling that can cause ice clumps or jamming
• Restores correct ice-level sensing when a broken or bent arm prevents cycling

• Disconnect power to the refrigerator before beginning work
• Often snaps or slides into a clip on the ice maker; remove the ice bin or ice maker cover for access
• Handle carefully to avoid bending; align the arm so it moves freely through its full range

Note: Use this part along with the correct Ice Maker. Add-on kit is IM6D. Replacement Ice Maker (only) is WR30X10093.