General Electric Range Heating Element

• Element will not heat

I easily unplugged the oven and unscrewed the top and those burners and replaced with new one. I plugged it back and tested them. both are working perfectly now. it was very easy and i did not have to pay for technician and labor. Read more

• Little to no heat when baking

My oven element "melted away" on a Saturday evening. I couldn't find any parts locally on Sunday so that left me until Monday with no oven. On Monday, I had the option of buying one locally for $70+ dollars or go online. I've dealt with AppliancePartsPros before and they've always delivered so I took the chance and put an order in. I had the part Tuesday afternoon without driving anywhere and for only $54... in less than 30 hours after I ordered it! WOW! It took almost no time to install... Read more

Stove is a GE Adora Model JBP63HH2bb. It took me forever to figure out how the burner was attached to the rails. My glass top was different than any instructions found on the internet for changing out a burner. The burners on this one are held to the bottom of the glass cook top by two rails that cross the bottom of the burner assemblies. In order to get too the burners you must remove 4 Phillips screws to lower the rails and burners from the cooktop. I suggest two people do this because... Read more

• Element will not heat

I purchased the replacement part after seeing how easy it was to fix by watching videos online. Read more

• Oven not heating evenly
• Little to no heat when baking

Checking for part replacement.....found your website.....I thought I had the right part, but called the tech/order line. Spoke to a very knowledgable tech, which she checked the stove serial # vs the part I thought I could use. The Tech advised that it WAS NOT and related the findings. I agreed after a short discussion and ordered the new element. The order was placed on Monday afternoon, on TUESDAY the FEDX truck pulled in with the replacement element!!!!!!! I watched the video offered on... Read more

Replaced element. The new element was perfect. The shipping was perfect. Installation would have taken less than 10 minutes if the two range wires attaching to element had been 1 inch longer. Attached thin nosed vice grips to wires at spade terminals to facilitate attachment to element. The repair was simple enough but it would have been perfect if GE engineers had made wires 1 inch longer. Read more

• Oven is too hot
• Oven not heating evenly
• Won't start
• Little to no heat when baking

With the help of Wendee and Karen, we finally figured out my model numbers and which parts where correct. I ordered the parts and all arrived the next day except for the Broiler element which arrived in 2 days. I installed the new Baking Element myself. Took longer to figure out which curcuit braker to turn off. In about 30 minutes I had a brand new Baking Element in my oven working perfectly. On the following day, I installed the Broiler Element. That took a bit longer as it sits in a metal... Read more

Following the vido helped did not know u can remove door would have made it easer Read more

I lifted the front hood and removed the back control panel cover. I then replaced two terminal blocks with the new kits. Perfect match except wires were a bit long. So I rolled them up neatly and tucked them away at the control center. Used electrical tape to band both sets of wire and protect them from the metal edges between the range and control area. I replaced the control cover and installed two new burners. Perfect installation. Read more

Raised ceramic top, removed old element, installed the new one. Read more

• Little to no heat when broiling

I have had this oven for 40+ years. It is an enamel oven, something that you can no longer buy. Because I did not wish to buy new, I decided to service it myself and searched for the parts I needed. AppliancePartsPros.com was the only site to offer all three parts, so many having been discontinued by other providers. I replaced the oven gasket, the broiler element & the lens without any difficulty. I have replaced the bake element previously as well. I am very grateful that I was able to keep... Read more

• Little to no heat when broiling
• Element will not heat

I ordered the replacement part; after it arrived, I turned off the power to the oven - watched the video on how to replace the part, which was fantastic as it told me to make sure when I disconnect the old element not to let the wires fall behind the oven (that would have been a big problem b/c it's a wall oven) - However, one wire still slipped back a little - so I used needle nose pliers to retrieve it. Was able to plug the new one in - screw it into place with the original screws. I made... Read more

• Little to no heat when broiling

I needed to replace the oven broil element on my 15 year old GE range/oven unit. The broil element was broken in half during an oven self-cleaning cycle. Due to the age of the oven, I decided to replace both the broil and bake elements. I ordered the elements from Appliance Parts Pro. Their web site made it very easy to identify and locate the correct replacement parts. The parts arrived in 2 days. I watched the repair demo videos available for each element. Although the oven used in the demo... Read more

Ordered new parts and replaced all. Had to slightly modify the wire terminals all four surface elements so that they would fit the ceramic insulators that were shipped with each one. Read more

My husband, who was the FIX-IT repair man at our house, passed away in March. When our bake element burned out my son, who is 18 looked at me and I looked at him and we shook our heads! We hunted on the oven till we found the serial number. We googled for GE OVEN repair parts and up popped AppliancePartsPros. We found the element, ordered it, watched the DETAILED VIDEO on how to change it out. The part came the next day. Philip had the old one out and the new one in in less than 10... Read more

• Little to no heat when baking

I visited Appliance Pros website and indicated the problem we were having etc. Found the suspected part (heating element), went on YouTube and found out how to remove the part from the oven and test it with a multi-meter. Keep in mind I have never used a multi-meter before or made repairs to an oven before. However, I have used Appliance Pros before to fix a refrigerator problem just a month earlier and after watching their video it was a very easy repair. Anyway, I tested the old convection... Read more